You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Fisher plow push plates
- Thread starter dirtydrew420
- Start date
sweetk30
Well-known member
Instructions finder page . Type in your 7160 and search . Then Click the pdf file and open it .
http://library.fisherplows.com/esearch.asp?_ga=2.227899359.35128068.1611671538-1101390970.1603720227
http://library.fisherplows.com/esearch.asp?_ga=2.227899359.35128068.1611671538-1101390970.1603720227
OP
dirtydrew420
Well-known member
Thanks dude! That did the trick, I'm actually kind of ashamed I couldn't do that on my own.
Sent from my SM-G970U using Tapatalk
Sent from my SM-G970U using Tapatalk
sweetk30
Well-known member
I like my fisher plows so thats how i know .
Glad to help you .
Glad to help you .
OP
dirtydrew420
Well-known member
Maybe you can help me with this then. My vehicle, an 04 tahoe, requires isolation module 29070-1. The dash one is different from 29070 because of something wiring related having to do with the DRL'S. I was able to find a used harness and module, but it's the 29070. I'm thinking I can make it work or wire up something to suffice. I'm not really using it for commercial use, so I won't be upset if all the lights are on or If I have to rig something. You think it will do the trick?
Sent from my SM-G970U using Tapatalk
Sent from my SM-G970U using Tapatalk
sweetk30
Well-known member
My fisher plows are the old speedcast conventional style plows with belt drive hydros .
When i wire up my plow setup lights i use a few relays . 1 turns on with marker light on . This lets me drive with marker lights on the truck . Then the high/low beam switch still works and lets me feed the plow lights off this way . Then when not plowing a master switch between the marker light trigger to relay 1 . No accidental double headlights .
www.plowsite.com has lots of info over there . And manufacturer specific section with each plow maker having there own section .
Decent guys there . Same screen name for me there and 99% of other forums i am on .
When i wire up my plow setup lights i use a few relays . 1 turns on with marker light on . This lets me drive with marker lights on the truck . Then the high/low beam switch still works and lets me feed the plow lights off this way . Then when not plowing a master switch between the marker light trigger to relay 1 . No accidental double headlights .
www.plowsite.com has lots of info over there . And manufacturer specific section with each plow maker having there own section .
Decent guys there . Same screen name for me there and 99% of other forums i am on .
OP
dirtydrew420
Well-known member
Thank youMy fisher plows are the old speedcast conventional style plows with belt drive hydros .
When i wire up my plow setup lights i use a few relays . 1 turns on with marker light on . This lets me drive with marker lights on the truck . Then the high/low beam switch still works and lets me feed the plow lights off this way . Then when not plowing a master switch between the marker light trigger to relay 1 . No accidental double headlights .
www.plowsite.com has lots of info over there . And manufacturer specific section with each plow maker having there own section .
Decent guys there . Same screen name for me there and 99% of other forums i am on .
Sent from my SM-G970U using Tapatalk