To avoid these ads, REGISTER NOW!

Flake Sizes

cansari

Well-known member
Joined
Mar 26, 2009
Messages
48
I am trying to decide between 1/4" and 1/2" flakes for a 700 SF garage (for medium to heavy coverage). It seems that the 1/4" size is the standard size - has anyone used 1/2" or larger? If so, I would love to see some pictures.

Also, has anyone tried the various application methods (i.e., by hand, with a shaker, or with a fertilizer spreader) and come up with an opinion as to which is best for even coverage?
 
To avoid these ads, REGISTER NOW!

Irondrive

Well-known member
Joined
Jun 25, 2008
Messages
59
Location
Chandler, Az
1/4" is as large as I go. I've seen larger however I personally don't like it. 1/8" looks great also. Broadcasting by hand is my preferred method. Do a dry run on your driveway to get the touch and look you like. Torginol and Chips Unlimited are two places to get your chips.

Good luck!
 

rugerlady

Well-known member
Joined
Aug 15, 2008
Messages
1,378
Location
Michigan
I personally like the 1/4 ", if you go any finer than that, I think it looks best with a very heavy coverage. Spreading them by hand seems to be the method most people use.
 

AlphaGarage

Well-known member
Joined
Apr 16, 2008
Messages
1,298
Location
Every Garage, AnyTown, USA
Due to their lighter weight makes 1/8" are a bit more difficult to spread, although size isn't an issue if you're going full broadcast.

Generally speaking a light broadcast and a full broadcast are easier than medium broadcasts.

Practice first, start with very small hand fulls, and really throw them out there with force. If the density is too light, it's easy to toss out another hand full. BUT - if the density is too thick, that bell can't be un-rung.
 
To avoid these ads, REGISTER NOW!

wildcat12

Active member
Joined
Jun 9, 2009
Messages
33
Location
cookeville tennessee
best way to get a even coverage with the flakes is to buy some spiked shoes from a "commercial" Sherwin Williams store so you can stand out in the wet epoxy, then take a"small" amount of flakes and toss them high into the air and let them flutter down like snow flakes. You'll be suprised how even you and get the coverage with a small amount of flakes, takeing your time is key and "always" toss the flakes up and never down ! Torginol or Chips Unlimited are sources for the flakes
 

AmericanEpoxyFloors

Active member
Joined
May 8, 2009
Messages
42
Location
Charlotte, NC
Be patient when you are spreading the flakes and don't ever get 'too many' in you hand at one time. Throw the flakes as high as you can to allow them to spread out on the way down.

My two cents :)
 
To avoid these ads, REGISTER NOW!
Top Bottom