Flex head ratcheting wrench

[yotie]

Hey guys im in the market for some "Flex head ratchet wrenches " first off, money is not the issue, But! Where the tools are made is! I hear and read alot of good news about "snap on" but when i try to search for "snap on" it gives me "blue -point" or "williams" both wich are NOT made in the USA....

So basically what im asking, is what is the Best "USA" made "Flexible ratcheting wrench. M.M .....

I see "SK tools" are usa made, anyone have anything to say about that brand?
Please let me know , i want a good wrench set that will last,

 

[ez-duzit]

Snap-On.

 

[APEowner]

https://store.snapon.com/Dual-80-Technology-Ratchets-Chrome--Ratchet-Sealed-Head-Dual-80-174-Technology-Long-Flex-Head-3-8-drive-P645963.aspx

 

[Askme42]

Does armstrong make flex heads?

Because of government contract theirs must be 100% usa made

 

[quattroJoe]

SK's ratcheting wrenches aren't coming out until April, and there won't be a flex head (at least at first.)

You'll have a difficult time finding much in the way of US made, especially with a flex head. You could try Proto, probably your best bet after Snap On, but that's just a guess honestly.

 

[Askme42]

https://store.snapon.com/Dual-80-Technology-Ratchets-Chrome--Ratchet-Sealed-Head-Dual-80-174-Technology-Long-Flex-Head-3-8-drive-P645963.aspx

Wrench. Not ratchet.

 

[yotie]

SK's ratcheting wrenches aren't coming out until April, and there won't be a flex head (at least at first.)

You'll have a difficult time finding much in the way of US made, especially with a flex head. You could try Proto, probably your best bet after Snap On, but that's just a guess honestly.

I see these right here???http://www.ntxtools.com/network-too...BO5t3UbRx19fLefR55V2zh2Vq_UroqjsWeBoCNuLw_wcB

 

[Sine Swept]

http://www.protoindustrial.com/en/industrial-tools/Proto/Wrenches/Ratcheting-Wrench-Sets/JSCVMF-12S_Proto%C2%AE-12-Piece-Black-Chrome-Metric-Combination-Locking-Flex-Head-Ratcheting-Wrench-Set---Spline-/

I didn't see a COO but at that price it must be legit.

Any Proto tool I have is top notch.

 

[Ruger_556]

I see reading comprehension on GJ is at an all time low today

As far as I know there are not any USA made flexible versions on the market. Snap-On makes straight and reversible here, I-beam Proto's in reversible, and Armstrong has straight and reversible models made in the USA too.

If you want flex head it's imported, Carlyle, Bluepoint, Gearwrench, MAC (Facom), etc...

 

[Travisnd]

Craftsman Industrial makes flex head ratcheting wrenches that are Made in USA, I have them at home! You can buy them from Summit Racing

 

[Ruger_556]

http://www.protoindustrial.com/en/industrial-tools/Proto/Wrenches/Ratcheting-Wrench-Sets/JSCVMF-12S_Proto%C2%AE-12-Piece-Black-Chrome-Metric-Combination-Locking-Flex-Head-Ratcheting-Wrench-Set---Spline-/

I didn't see a COO but at that price it must be legit.

Any Proto tool I have is top notch.

Those are imported, only the I-beam models are made here. Still probably excellent though.

 

[toolmutt]

http://www.protoindustrial.com/en/industrial-tools/Proto/Wrenches/Ratcheting-Wrench-Sets/JSCVMF-12S_Proto%C2%AE-12-Piece-Black-Chrome-Metric-Combination-Locking-Flex-Head-Ratcheting-Wrench-Set---Spline-/

I didn't see a COO but at that price it must be legit.

Any Proto tool I have is top notch.

Not made in USA. (Edit: Ruger beat me to it.)

 

[Doug427]

Made in USA, according to the description....

http://www.ebay.com/itm/Craftsman-7...d887a3&pid=100011&rk=5&rkt=10&sd=271739478126


Hope this helps.

 

[shockwave]

Proto and Armstrong are only Usa made ones snap I believe only their reversible ratchet one that are bulky

My favorite ratcheting wrench would be the Kabo made ones Asian make (has brass retainer) not to be confused with gearwrench

 

[Travisnd]

Made in USA, according to the description....

http://www.ebay.com/itm/Craftsman-7...d887a3&pid=100011&rk=5&rkt=10&sd=271739478126


Hope this helps.

Yes, these are Made in USA, I have the same ones!

 

[APEowner]

Wrench. Not ratchet.

I see reading comprehension on GJ is at an all time low today

Oops. I must have been out of school the day they were teaching reading comprehension.

Sorry about that.