Flex ratcheting wrenches 20mm+ ?

[turner66]

I'm having difficulty locating flex ratcheting wrenches larger than 19mm. 20, 21, 22 mm are short term priority but I'd get larger if available as well. Features such as locking, reversing, double box end, etc. are nice but not mandatory in this case. If you know of individual or sets of these larger sizes, please post some links? Thanks!

 

[shawhite]

Gearwrench has them

 

[KnurledNut]

Gearwrench 9903D completer set will get you 21, 22, 24, 25.
Probably wont ever need 20mm in a ratchet wrench.
https://www.amazon.com/dp/B000NI94PG/?tag=atomicindus08-20

 

[turner66]

Gearwrench 9903D completer set will get you 21, 22, 24, 25.
Probably wont ever need 20mm in a ratchet wrench.
https://www.amazon.com/dp/B000NI94PG/?tag=atomicindus08-20

Thank you, ordered.
This gets me most of the way to my goal.
Yeah, that 20mm is an oddball. I'll just have to keep up my searching for that one.
Incidentally, I recently came across a situation with a 20mm nut on the top stud of an old shock. More than 1" of the stud above the nut, no clearance to get a deep socket and ratchet or driver and could only get a bit less than 1/4 turn... doing that with an open end was time consuming and painful. New replacement shock was 21mm... Flexible ratcheting box end in both sizes would have been ideal.
Thanks Again!

 

[Wrench97]

Edit, should read and comprehend post first before posting...................................

 

[KnurledNut]

Thank you, ordered.
This gets me most of the way to my goal.
Yeah, that 20mm is an oddball. I'll just have to keep up my searching for that one.
Incidentally, I recently came across a situation with a 20mm nut on the top stud of an old shock. More than 1" of the stud above the nut, no clearance to get a deep socket and ratchet or driver and could only get a bit less than 1/4 turn... doing that with an open end was time consuming and painful. New replacement shock was 21mm... Flexible ratcheting box end in both sizes would have been ideal.
Thanks Again!

Gotcha. Never hurts to have a complete set. Bolt heads grow or shrink around here.
Did ya try 13/16?

Here is a generic 20mm flex:
https://www.amazon.com/dp/B08CKRPL4B/?tag=atomicindus08-20

 

[turner66]

Gotcha. Never hurts to have a complete set. Bolt heads grow or shrink around here.
Did ya try 13/16?

Here is a generic 20mm flex:
https://www.amazon.com/dp/B08CKRPL4B/?tag=atomicindus08-20

Good enough for now!
Ordered that one too. If I ever find one that matches the Gearwrench and other Brands of ratcheting wrenches I already have, my son can have this one
Thanks.

 

[kbeefy]

I have that set, works well enough. Don't often need a 21-25mm gearwrench, but every time I did I appreciated them.

 

[Formerjeeper]

Menards has singles if you are near one