You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Floor coating or sealer recommendation needed
- Thread starter carsdwl11
- Start date
I have never seen the point of garage floors. Some people seal them or Racetrack. Forget that. I use mine. Poured the slab, garage went up. Smooth finish. I sweep it. I weld in there. I work on my cars. Oil spills just get some kitty litter and scrubbed. It is a work garage, not a dang showroom for eating off of. I do not keep my vehicles parked in there in winter. Garages are for guys, cars are for car ports
LegacyIndustrial
ALLIANCE MEMBER
Our SEC Sealer is great, HD6600MMA too.
http://www.legacyindustrial.net/products/concrete-sealers/sec-sealer.html
http://www.legacyindustrial.net/products/concrete-sealers/hd6600-mma-concrete-sealer.html
http://www.legacyindustrial.net/products/concrete-sealers/sec-sealer.html
http://www.legacyindustrial.net/products/concrete-sealers/hd6600-mma-concrete-sealer.html
thickhead
Well-known member
I have never seen the point of garage floors. Some people seal them or Racetrack. Forget that. I use mine. Poured the slab, garage went up. Smooth finish. I sweep it. I weld in there. I work on my cars. Oil spills just get some kitty litter and scrubbed. It is a work garage, not a dang showroom for eating off of. I do not keep my vehicles parked in there in winter. Garages are for guys, cars are for car ports
C'mon, tell us how you really feel!
RPH
Well-known member
Look at ghostshield products. One of the vendors here carries it. I used the 4500 densifier and have the 8505 sealer to put on in a week. The 8505 is approved for Dot bus garages so I figured should last a long time in my shop. Neither product makes the floor slippery and is transparent. The 8505 resist oil, antifreeze, and salt damage.
thanks for the links, I will check them out.
I have used the floor for 10+ years now like it is . I'm simply tired of it always looking and feeling dirty. I also do park in it almost every day year round. I figure that part of the reason my 05 truck still looks as good as any new one.
When I was a teen we had a dirt floor shop and a gravel floor garage. I swore id never lay in the rocks to work on something again once I built my shop ......... never have , never plan to.
I have used the floor for 10+ years now like it is . I'm simply tired of it always looking and feeling dirty. I also do park in it almost every day year round. I figure that part of the reason my 05 truck still looks as good as any new one.
When I was a teen we had a dirt floor shop and a gravel floor garage. I swore id never lay in the rocks to work on something again once I built my shop ......... never have , never plan to.
Hi
We would suggest our SPGX coating, low cost, easy to apply. 25% discount to GJ members brings to cost to south of 50 cents/ ft.
https://store.armorpoxy.com/mm5/mer...=A&Product_Code=SPGX-GAL&Category_Code=AULTRA
We would suggest our SPGX coating, low cost, easy to apply. 25% discount to GJ members brings to cost to south of 50 cents/ ft.
https://store.armorpoxy.com/mm5/mer...=A&Product_Code=SPGX-GAL&Category_Code=AULTRA
Garage Flooring
ALLIANCE MEMBER
Look at ghostshield products. One of the vendors here carries it. I used the 4500 densifier and have the 8505 sealer to put on in a week. The 8505 is approved for Dot bus garages so I figured should last a long time in my shop. Neither product makes the floor slippery and is transparent. The 8505 resist oil, antifreeze, and salt damage.
Ghostshield is a great choice for a non decorative sealer http://www.garageflooringllc.com/siloxa-tek-8505-concrete-sealer/ . You would want to use our densifier first