Floor coating that will hold up to a skid steer

[rjprice]

Building a 40x50 mueller in S Texas. Just poured the slab last week with a smooth finish.

Question is: Will anything stand up to my S175 Bobcat? I don't plan to do donuts in there but I would like to park it in there.

What type of coating would work? Sealer ? Epoxy?

Thanks!

 

[p_mori7]

in straight / out straight = no problem.

if turning / spinning = lay down a sheet of plastic or cardboard first.

 

[rjprice]

Is there a sealer that would at least keep oil and other stuff from soaking in that would hold up to the skid steer?

 

[rlitman]

My office keeps their skid steer in the garage. They have epoxy in there. It's been 8 years, and the skid steer has been upgraded, but the epoxy is still fine. They do put wood under the bucket before parking it though. The tires have left marks, but not permanent ones. Just the occasional stripe that could be left by boots with marking soles too.

 

[RPH]

Ghostshield products are designed to do exactly what you want. Apply the densifier and use 8505 or 8510 that they have out now. I used 4500 densifier and the 8505 and nothing sticks to the concrete.