Floor grinding corners with 4" makita angle grinder.

[bagged89s10]

So I'll be grinding my garage floor soon and will be doing the edges with my 4" makita angle grinder.

I need a dust shroud for it. What dust shroud will fit and isn't a lot of money?

 

[benwah]

I think if you were to Google "Makita <insert model number> dust shroud" you may find your answer!

 

[Austin_Jim]

I just finished the epoxy on my garage. I used a grinder with no shroud. It DEFINITELY made a lot of dust, but without the shroud, I was able to see where I was grinding a little better. It worked out for me. Just make sure to wear a respirator.

 

[bagged89s10]

I saw a video on you tube of a guy who made one. I'm going to give it a shot using a clear plastic container.

 

[Shea]

Here's a simple solution if you don't want to mess with making your own. Dust shroud

 

[Trey T]

If you have time to dry, just use water.

Dow your grinder have variable speed?

 

[LegacyIndustrial]

If you have time to dry, just use water.

Dow your grinder have variable speed?

Use a GFCI if going wet with a hand grinder.

 

[bagged89s10]

Use a GFCI if going wet with a hand grinder.

I always use gfci outdoors and in the garage.

Just installed a new gfci.

 

[LegacyIndustrial]

Smart


Sent from my iPhone using Tapatalk

 

[mikec35]

Here's a simple solution if you don't want to mess with making your own. Dust shroud

I used one of those "Dusties" on a 7" grinder, when you attach a vac hose to it the shroud flexes- makes it difficult to vacuum up the dust due to its inconsistent contact with the floor. Hopefully the 4" version works better since it's smaller and should flex less.