Floor Pictures Please

[gregs]

I am at the stage where I am needing to take care of the floor and was wondering if I could get some of you to post some pictures of your finished floors. I havent decided on epoxy, stain, or vct yet. I dont have the budget for the racedeck style tiles. I am interested in seeing what different colors look like and different colors and patterns in vct look like. Thanks

 

[jason427]

Here is one
I am getting ready to do my wifes garage like mine. I will post detailed pictures of both when the second one is finished in a new thread.

 

[6t7gto]

Greg,
I did mine in porcelain.

then i moved my lifts into the 2 car side.

just finishing up the 3 car side where the lifts will reside.

david

 

[jason427]

I added a couple more pictures right after completion of the first garage.

Waiting on VCT for the second garage.

Jason

 

[DarrenD]

Here is one
I am getting ready to do my wifes garage like mine. I will post detailed pictures of both when the second one is finished in a new thread.

wow, that is one of the nicest garages i have seen.

 

[joecaver]

here's a shot of mine.

 

[SteveB]

Armstrong VCT, approximately 550 sq. ft. For details see http://www.cardomain.com/ride/281382/14

 

[steve392]

gregs,

Here's a shot of an epoxy coated floor. Picture was taken just after I finished putting it down. Very durable, cleans easy. I drag a floor jack around on it with no problems. The brand I used was Epoxy-Coat. Do a search on this board and you'll find a full write up that I did on it.

Steve

 

[jason427]

gregs,

Here's a shot of an epoxy coated floor. Picture was taken just after I finished putting it down. Very durable, cleans easy. I drag a floor jack around on it with no problems. The brand I used was Epoxy-Coat. Do a search on this board and you'll find a full write up that I did on it.

Steve

NICE LOOKING FLOOR.....

If the floor in my second garage had a nice smooth finish I would probably go the epoxy route...

 

[69lkmno]

Click on my signature for epoxy floor.

 

[McVicker]

Armstrong VCT, approximately 550 sq. ft. For details see

Steve,
Where did you get that picture of the 787? I WANT ONE!!!

-Dan

 

[SteveB]

My local Mazda dealer was going to pitch it so I offered to find it a good home. It must have been some sort of promo thing that Mazda Canada sent out to them.

I have never seen that particular photo for sale commercially - sorry.



The photo on the left of the AWR Racing MX-5 is available.
http://www.awrracing.com/pages/06MX5R/index.html

 

[GLF]

If you do the VCT floor. I suggest you check were your tires comes to rest as the white does react with the tires (rubber) and will leave a stain over time. I wish I would have done 2 sqare feet of black instead of just one square foot.

 

[JohnZ]

Solvent-based epoxy, done seven years ago:

 

[Floorguy]

Here is a shot of one of the floors I did for a client. Primer, 2 coats of 100% epoxy, flake, and top coated with urethane for wear , and chemical resistance.

There are 3 things that make a floor look good and last a long time.

1. Prep, Prep, Prep, I shotblast, as that is the BEST method.
2. Quality materials 100% solids are the best.
3. Using a proven method of application.

Obviously one is before and one is after

Don Cosner

 

[Floorguy]

My attachments did not make it. Trust me, I am better at doing floors then computers I'll try it again with the attachements. I can onlly seem to get very small pictures to go thru but I see larger ones on the site. Guess I need a little more work.

 

[JMURiz]

Wow Floorguy, that really brightens up the space!