You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Fluid transfer hand pump
- Thread starter tacomabob
- Start date
devoncoolman
Well-known member
Same thing i use. After about 2 years the hose is harder then a volcanic rock though.
MattPersman
Well-known member
Anyone have the blue point? How is the quality if so.
http://buy1.snapon.com/catalog/item...roup_ID=681757&store=snapon-store&dir=catalog
http://buy1.snapon.com/catalog/item...roup_ID=681757&store=snapon-store&dir=catalog
Strouty
Well-known member
I am looking for a good one as well, but I would like one that goes on a five gallon bucket.
Anyone have the blue point? How is the quality if so.
http://buy1.snapon.com/catalog/item...roup_ID=681757&store=snapon-store&dir=catalog
My guess is these are all coming out of the same factory:
http://www.amazon.com/Pittsburgh-Automotive-Multi-Use-Transfer-Pump/dp/B006ZB8PDM/ref=sr_1_3?ie=UTF8&qid=1377466717&sr=8-3&keywords=fluid+transfer+pump
http://www.amazon.com/Great-Neck-OEM-25713-Transfer/dp/B00825PX3E/ref=sr_1_8?ie=UTF8&qid=1377466717&sr=8-8&keywords=fluid+transfer+pump
http://www.amazon.com/Hand-Pump-Siphon-Gas-Liquid/dp/B004107292/ref=sr_1_9?ie=UTF8&qid=1377466717&sr=8-9&keywords=fluid+transfer+pump
http://www.amazon.com/Custom-Accessories-36677-Pennzoil-Multi-Use/dp/B004HL2182/ref=sr_1_12?ie=UTF8&qid=1377466717&sr=8-12&keywords=fluid+transfer+pump
I just used a hand pump that I got from the parts store to fill my Tcase & diffs with. Next time I do it, ill try the HF hand pump http://www.harborfreight.com/multi-use-transfer-pump-66418.html
Sureshot
ALLIANCE MEMBER
I have had the idea of putting a small oil pump(small enough to fit in a pail bung) and drive it with a drill or driver to pump oil. Any one know of a small enough gear pump?
I built one with an automotive oil pump that goes in a 22 gallon plastic drum and it works great to **** or pump. It is my used oil catch and I can pump the oil out into 5 gallon pails to empty it or use the hose to **** the oil out of a container used to LOF a semi or anything else that doesn't go on the hoist.
I also built an oil sprayer out of a 20lb propane tank that had a fill bung and siphon tube added and uses air pressure to spray canola oil through a garden spray nozzle. May have to make one for 80-90.
I built one with an automotive oil pump that goes in a 22 gallon plastic drum and it works great to **** or pump. It is my used oil catch and I can pump the oil out into 5 gallon pails to empty it or use the hose to **** the oil out of a container used to LOF a semi or anything else that doesn't go on the hoist.
I also built an oil sprayer out of a 20lb propane tank that had a fill bung and siphon tube added and uses air pressure to spray canola oil through a garden spray nozzle. May have to make one for 80-90.
Dust
Well-known member
I want this one but the cost is making me hesitate. However, I'm sure I'll have one too many one night and end up ordering it in a drunken shopping binge, as well as two hundred dollars more in tools that I absolutely must have, and end up loving it so much I'll wonder why I waited in the first place.