Ford Shop Manuals, SPX-Miller Tools

[Busted_Knuckles]

Hey guys, I ebay as a hobby, was just listing some stuff and I got to thinking, I have been spending more time over here browsing, so I thought Id throw out there that I have around 1000 Ford Shop manuals (printed paper 1973-2000) and on disc I have 1992-2000. I usually get $25 for a OE Disc (postage included), which is either car or truck, covers one year. Not burns, but the real OE deal, some are brand new sealed, some used. The paper manuals are almost always used, about $25 a piece for them too (plus postage). Mustang and truck always bring more.

Im also knee deep in Dodge Chrysler Plymouth Miller tools. I also have some Kent Moore, and Rotunda, feel free to ask, most of it I have on spread sheet, I know what its all worth (street value), Im not trying to get rich (list price), all this stuff needs a new home, Ive run out of room.

Ive also got at a couple thousand pounds of hand tools that need a new home, most all of it is older american made, sk, bonney, armstrong, craftsman, stanley, and on and on. Its gonna take forever to move all that stuff, I get anxiety just looking at it. Ive been to a couple too many auctions, but thankfully I finally ran out of money! At some point I will start putting that stuff up here and test the waters ?



Thanks for having a look, Bill

 

[eborcim]

Please post some pics of the non-eBay tools. Thanks!

 

[Busted_Knuckles]

Specifically ? Sockets, or wrenches, or carpenters tools or ?

Heres a sampling of what I have at the house of general hand tools. I just walked out and took 3 pics:




EDIT, 12/19/09, Ive sold all the ratchets, all the wrenches, and I will start listing out the sockets and extensions.

 

[Jack90210]

Ive also got at a couple thousand pounds of hand tools that need a new home, most all of it is older american made, sk, bonney, armstrong, craftsman, stanley, and on and on. Its gonna take forever to move all that stuff, I get anxiety just looking at it. Ive been to a couple too many auctions, but thankfully I finally ran out of money! At some point I will start putting that stuff up here and test the waters ?

I'm looking for:

1/2" drive deep impact sockets, both SAE and Metric;
Combo wrenches, 18mm-up;
Combo wrenches, 1"-up.

Thanks.

 

[eborcim]

How much for the big 'ol SK and the Bonney 1/2 Dr ratchets in pic 2?

 

[71Datsun510Wagon]

I am looking for the following Gearwrench ratcheting wrenches:

5/6" short combo
1/4" short combo
13/16" short combo

1/4" regular combo
11/16" regular combo
13/16" regular combo

17 mm short combo

9mm flexible regular combo
11mm flexible regular combo
12mm flexible regular combo
17mm flexible regular combo

Possibly other ratcheting gearwrenches bigger than 19mm or 3/4" too.

I am also looking for Bonney polished combo wrenches. The wrenches in pic #1, wrapped up in the zip-tie might be what I'm looking for.

 

[caper]

I'm looking for the master disc that is needed to run those discs if you have one.I have a complete set of discs but the computer that was set up to run them died and I can't seem to find the master anymore.I'm also looking for the Yellow ford disc that came out around 2003 that did from 96-2002.

 

[Busted_Knuckles]

Not sure about any master disc, all the discs that I have come across run without 'dongles" or any other software, other than whats on the disc. The ones I have do run a setup, and if youve run and older disc put in a newer dated one, and then try to re-use the older disc it will stop you and tell you your disc is out dated. The ford training cds have a master disc. Are you sure your not having a PC problem? Ive got some yellow discs, I will have a look in the morning, they vary from years set to year set.

 

[gonzoengineer]

Do you have the paper manuals for a 1990 Ford Bronco? Do you also have the associated electrical wiring manual? If so, how much?

http://cgi.ebay.com/ebaymotors/1998...ptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

You should never lay a crank shaft on it's side for any period of time unless suspended by the bearing surfaces. They should always sit on end as sagging can occur otherwise. Just a friendly tip I had to learn a few years back myself.

 

[sk farmer]

please consider me for the sale of any bonney or old matco wrenches (the style with the v cut open ends) and proto pebble line or flare wrenches. let me know what you have. i will pay cash. some of the open ends and the combos with a wire tie look like the bonney or matco style. some of them may also be marked john deere or herbrand. i am looking for some to complete sets. thanks, sk farmer

 

[gonzoengineer]

Also, who is the manufacturer of the knurled handle ratchets. I'm quite interested in those as well.

 

[Busted_Knuckles]

thanks for the tip, its hanging, I only laid it down to photograph, Ive not had to learn the lesson, but used to work in a Ford Garage, got the 411 on that when I was still a kid!

You should never lay a crank shaft on it's side for any period of time unless suspended by the bearing surfaces. They should always sit on end as sagging can occur otherwise. Just a friendly tip I had to learn a few years back myself.

 

[Busted_Knuckles]

Also, who is the manufacturer of the knurled handle ratchets. I'm quite interested in those as well.

Thanks for asking, the long one was an SK, and the short a Bonney, I sold both of them last night and they mailed out this morning, the popular stuff goes quick I guess? Thanks, Bill

 

[Busted_Knuckles]

please consider me for the sale of any bonney or old matco wrenches (the style with the v cut open ends) and proto pebble line or flare wrenches. let me know what you have. i will pay cash. some of the open ends and the combos with a wire tie look like the bonney or matco style. some of them may also be marked john deere or herbrand. i am looking for some to complete sets. thanks, sk farmer

Weve got 5 degree weather coming tonight, so I got my hands full for the rest of the day, we got horses, and Ive got a full list of prep to do, not to mention the snow that got dumped on us last night.

Im going to organize the tools better and take more pics up close so you can browse and see what your looking at, I pretty much wont refuse any reasonable offers on any of it, Im looking to sell it piece by piece, for you guys that are missing a wrench here, socket there, maybe tonight I will post more pics of the same tools.

Thanks, Bill

 

[gonzoengineer]

Very good, thankfully mine was a verbal learning from another person's mistake that I just happened to be present for.

I was hoping they were SK. Shame I missed the larger one.

 

[gatewaysysop]

Has anyone else followed up lately on the shop manuals with the OP? I got the last PM from them on 12/8 and haven't heard back since, despite two PM's I sent trying to follow up.

Hope everything is okay and it's just the holiday hustle and bustle.

OP: Still interested if you have anything. Thanks.

 

[Busted_Knuckles]

Sorry, been a flake, need to figure out how to get email notifications of sent PMs sent to me? PM has been sent, thanks, Bill

 

[Selkirk]

Have any 1" thru 2" combo and boxend wrenches?
Also my son is in need of shop manuals 1994 Ford Bronco 302.

Let me know what you have
Thanks
Selkirk

 

[Busted_Knuckles]

Hi Selkirk,

Heres the truck manual for 1994, happens to include 1993. This was published in April of 1999. This is complete, the Body, Chassis, Electrical, Engine, Driveablility, Axle, Transmission, Wiring Diagrams, its all in there. I mail you the exact cd in the image, not a burn or copy of it. This is oe from a closed ford dealers service department.

If you want to see screen shots, check out my ebay listings, look at the 1997 CD that is listed, its the exact same format/contents.

$25 includes first class posteage, with delivery confirmation, it mails insured, if paid via paypal, mails same day or next day.

Thanks for asking, let me know if you have any questions, Bill

630-649-3261 is my cell.

 

[dustin19]

looking for 1/4 3/8 1/2 drive sk sockets and other sk items.
also looking for box end wrenches (no particular brand at the moment) and wrenches 1inch and up. dont suppose u got any indestro tools either ?

 

[Selkirk]

PM-sent

Selkirk

Hi Selkirk,

Heres the truck manual for 1994, happens to include 1993. This was published in April of 1999. This is complete, the Body, Chassis, Electrical, Engine, Driveablility, Axle, Transmission, Wiring Diagrams, its all in there. I mail you the exact cd in the image, not a burn or copy of it. This is oe from a closed ford dealers service department.

If you want to see screen shots, check out my ebay listings, look at the 1997 CD that is listed, its the exact same format/contents.

$25 includes first class posteage, with delivery confirmation, it mails insured, if paid via paypal, mails same day or next day.

Thanks for asking, let me know if you have any questions, Bill

630-649-3261 is my cell.

 

[Busted_Knuckles]

Hi Dustin,
Ive still got your first two or three PMs detailing what your looking for, I ended up dumping the bonney wrenches on ebay, which held me up from doing anything with the sockets, extensions and ratchets. I will be doing something with that soon, but for the moment, the step kid is out of school for two weeks, so Ive got a basement remodel I have to finish and Ive been helping out my neighbor with corn harvest and hay deliveries(yeah, its almost Christmas and we still have hundreds of acres around our house with corn standing!). Plus my regular duties, Ive been way behind. The day I posted these tools, I was sitting still, just how it goes.
I will pm you before I post anymore of what your looking for, just so you know its coming. Most all of the wrenches in that pic are gone (large and small), I just pm'ed bull about editing or deleting that post, so I can list new, thanks, Bill

 

[dustin19]

Hi Dustin,
Ive still got your first two or three PMs detailing what your looking for, I ended up dumping the bonney wrenches on ebay, which held me up from doing anything with the sockets, extensions and ratchets. I will be doing something with that soon, but for the moment, the step kid is out of school for two weeks, so Ive got a basement remodel I have to finish and Ive been helping out my neighbor with corn harvest and hay deliveries(yeah, its almost Christmas and we still have hundreds of acres around our house with corn standing!). Plus my regular duties, Ive been way behind. The day I posted these tools, I was sitting still, just how it goes.
I will pm you before I post anymore of what your looking for, just so you know its coming. Most all of the wrenches in that pic are gone (large and small), I just pm'ed bull about editing or deleting that post, so I can list new, thanks, Bill

ok bro thought u might have forgoten me so was checking

 

[eborcim]

Forgot to mention on here that the tools arrived fine. Thanks!