CENTRAL JERSEY CRAIGSLIST
http://cnj.craigslist.org/tls/3266976344.html
Damn good price @ $1750. Not sure if its 1022 or 722.
http://cnj.craigslist.org/tls/3266976344.html
Damn good price @ $1750. Not sure if its 1022 or 722.
Found a deal on craigslist? - List Here!
- Thread starter markf4e
- Start date
Region: Northeast
Location: Auburn, Ma
Item: Craftsman drill press
Price: $150
Link: http://worcester.craigslist.org/tls/3240447801.html
Location: Auburn, Ma
Item: Craftsman drill press
Price: $150
Link: http://worcester.craigslist.org/tls/3240447801.html
Jarhead0408
Well-known member
ScubaSteve
Well-known member
Indianapolis Hardinge "Chucker"/Second-Op Lathe
I REEEEEAAAAALLLLLYYYYY want to contact this guy....but already have a lathe I am restoring. This is a pretty good price for a Hardinge :http://indianapolis.craigslist.org/tls/3233277124.html
Looks like there may be a chuck missing, but 5C collets and a collet chuck can be had for cheaper than a 4 jaw......
I REEEEEAAAAALLLLLYYYYY want to contact this guy....but already have a lathe I am restoring. This is a pretty good price for a Hardinge :http://indianapolis.craigslist.org/tls/3233277124.html
Looks like there may be a chuck missing, but 5C collets and a collet chuck can be had for cheaper than a 4 jaw......
mrbreezeet1
Banned
posaune
Well-known member
Region: Northeast
Location: Rockville Ctr, NY
Item: MBC box
Price: $150
Link: http://newyork.craigslist.org/lgi/tls/3273662127.html
Seems like a cool older box. I'd consider it if it wasn't missing the two handles.
Location: Rockville Ctr, NY
Item: MBC box
Price: $150
Link: http://newyork.craigslist.org/lgi/tls/3273662127.html
Seems like a cool older box. I'd consider it if it wasn't missing the two handles.
Well **** I missed this one. Got up extra early to call at 6am too. Someone must have got it last night.
http://neworleans.craigslist.org/tls/3276375189.html
LOL he answered the phone "It's sold"
http://neworleans.craigslist.org/tls/3276375189.html
LOL he answered the phone "It's sold"
Last edited:
EOC_Jason
Well-known member
Oh holy hell, most of those pipe wrenches are aluminum too.... He probably should of started at like $500 OBO....
woodrail
Well-known member
Lamborghini Cabinets 10 foot wide - $2000 (N.W. Ohio)
--------------------------------------------------------------------------------
Selling a unique wall unit of imaged garage cabinets with lots of storage. Garage cabinet are 10 feet wide by 7 feet tall by 24 inches deep. Comes with 2 tall cabinets, 2 six drawer base units, 2 upper cabinets, and a diamond plate countertop. Also comes with a diamond plate power strip and under cabinet lighting. These cabinets retail for $5200.00 but have been discontinued and are no longer available. Cabinets are like new, have a few scratches on the inside tall cabinet. Images on these cabinets are hi-rez, very detailed and will never peel or fade, graphics are etched into the laminate and are chemical and scratch resistant.These cabinets have been in our showroom for 2 years. delivery and set-up optional, call Shawn for details. 419-410-3389
http://cleveland.craigslist.org/fod/3231529174.html
--------------------------------------------------------------------------------
Selling a unique wall unit of imaged garage cabinets with lots of storage. Garage cabinet are 10 feet wide by 7 feet tall by 24 inches deep. Comes with 2 tall cabinets, 2 six drawer base units, 2 upper cabinets, and a diamond plate countertop. Also comes with a diamond plate power strip and under cabinet lighting. These cabinets retail for $5200.00 but have been discontinued and are no longer available. Cabinets are like new, have a few scratches on the inside tall cabinet. Images on these cabinets are hi-rez, very detailed and will never peel or fade, graphics are etched into the laminate and are chemical and scratch resistant.These cabinets have been in our showroom for 2 years. delivery and set-up optional, call Shawn for details. 419-410-3389
http://cleveland.craigslist.org/fod/3231529174.html
Attachments
Rusty Musket
Well-known member
http://portland.craigslist.org/clk/tls/3327825709.html
Late 1950s Meyer DYNA-VISION engine analyzer. Yes the scope still works and there are lots of extra parts including a another scope.
Perfect for display in a retro shop. $225.00 Please call 360-936-1554
Late 1950s Meyer DYNA-VISION engine analyzer. Yes the scope still works and there are lots of extra parts including a another scope.
Perfect for display in a retro shop. $225.00 Please call 360-936-1554
Attachments
mrbreezeet1
Banned
Kaervak
Well-known member
1/3 HP Craftsman block grinder, $20 and complete. Located in Canton, OH
http://akroncanton.craigslist.org/tls/3344395667.html
http://akroncanton.craigslist.org/tls/3344395667.html
West of Denver - Evergreen
Two post lift w/ 7k lb capacity.
$999
http://denver.craigslist.org/tls/3346709682.html
<img src="http://images.craigslist.org/3G13Mf3I25L65Kb5J4cahf0fe6c260cff1b9c.jpg" alt="http://images.craigslist.org/3G13Mf3I25L65Kb5J4cahf0fe6c260cff1b9c.jpg">
"Ben Pearson 2 Post above ground lift. 7000lb capacity. 105" Tall and 137" Wide.
Pump, motor and tank replaced 2 years ago.
The pads are off in the photo and sitting next to the hoist so it's easier to get the legs under a lowered car.
The pads are easy to put on if you need to lift a truck."
Two post lift w/ 7k lb capacity.
$999
http://denver.craigslist.org/tls/3346709682.html
<img src="http://images.craigslist.org/3G13Mf3I25L65Kb5J4cahf0fe6c260cff1b9c.jpg" alt="http://images.craigslist.org/3G13Mf3I25L65Kb5J4cahf0fe6c260cff1b9c.jpg">
"Ben Pearson 2 Post above ground lift. 7000lb capacity. 105" Tall and 137" Wide.
Pump, motor and tank replaced 2 years ago.
The pads are off in the photo and sitting next to the hoist so it's easier to get the legs under a lowered car.
The pads are easy to put on if you need to lift a truck."
DarkMonohue
Well-known member
Region: Pacific Northwest
Location: Albany (between Salem and Eugene), Oregon
Item: Snap-On KRL761B roll cab (mistakenly listed as KRL7618PES)
Price: $2200
Link: http://salem.craigslist.org/tls/3345524578.html
Sure is pretty...
Location: Albany (between Salem and Eugene), Oregon
Item: Snap-On KRL761B roll cab (mistakenly listed as KRL7618PES)
Price: $2200
Link: http://salem.craigslist.org/tls/3345524578.html
Sure is pretty...
Last edited:
uniballer
Well-known member
artval64
Member
Craftsman Midnight Blue Rollaway
Wish I didn't have a bunch of gloss red US General boxes. I really dig this color!
http://losangeles.craigslist.org/wst/tls/3349246493.html
Wish I didn't have a bunch of gloss red US General boxes. I really dig this color!
http://losangeles.craigslist.org/wst/tls/3349246493.html
Attachments
mrbreezeet1
Banned
Re: Craftsman Midnight Blue Rollaway
I think it's too much for that box set.Unless the rare color makes it worth it, IDK.
Wish I didn't have a bunch of gloss red US General boxes. I really dig this color!
http://losangeles.craigslist.org/wst/tls/3349246493.html
I think it's too much for that box set.Unless the rare color makes it worth it, IDK.
Attachments
woodrail
Well-known member
Big As* Vise and other cool stuff.
Wish I had some spare cash. This thing looks like a beast.
http://cleveland.craigslist.org/tls/3371476225.html
Also check out the cool drill press.
Wish I had some spare cash. This thing looks like a beast.
http://cleveland.craigslist.org/tls/3371476225.html
Also check out the cool drill press.
Attachments
I found this on local CL 6 weeks back. 1962 Lincoln SA 200 Redface welder. Powered by a 4 cylinder Continental gas engine. It ran, and welded when I looked at it-a steal at $300.00.
This is how it looks now, as I complete the refurbishment.
This is how it looks now, as I complete the refurbishment.
I found this on local CL 6 weeks back. 1962 Lincoln SA 200 Redface welder. Powered by a 4 cylinder Continental gas engine. It ran, and welded when I looked at it-a steal at $300.00.
This is how it looks now, as I complete the refurbishment.
Holy Sh*t that's nice, great score on the Lincoln.
Attachments
cgv69
Well-known member
How about a Snap-On Classic 78 for $1k?
Hillsboro, OH... http://cincinnati.craigslist.org/tls/3373007696.html
Its dirty but I bet it would clean up just fine
Hillsboro, OH... http://cincinnati.craigslist.org/tls/3373007696.html
Its dirty but I bet it would clean up just fine
woodrail
Well-known member
How about a Snap-On Classic 78 for $1k?
Hillsboro, OH... http://cincinnati.craigslist.org/tls/3373007696.html
Its dirty but I bet it would clean up just fine
Thats tempting. I wondering what the "steal me" price might be?
Perrorojo
Well-known member
http://kalamazoo.craigslist.org/tld/3275815181.html
with tools.
Midwest
Kalamazoo MI.
Jesse James Toolbox w/tools
with tools.
Midwest
Kalamazoo MI.
Jesse James Toolbox w/tools
Last edited:
cgv69
Well-known member
I don't know, I've seen a lot of good deals on Snap-On boxes (especially the KRA series) in the Cincy CL. About 2 months ago I picked up a KRA4114\4107 combo for $1k. It was in a barn too and dirty like that one but cleaned up great. A few weeks later I saw another KRA4107 for $600. I've also seen a number of KRSC46's for between $600-$800
snap on green hard handle screwdriver set.
http://knoxville.craigslist.org/tls/3384054014.html
http://knoxville.craigslist.org/tls/3384054014.html
What a horrible way to ruin an otherwise nice set of tools!
brianpgriset
Well-known member
9 drawer Vidmar box, north Houston (bottom drawer looks a bit funky though), $300
http://houston.craigslist.org/tls/3385954684.html
Older Hein-Warner 1.25 ton jack, needs seals, south Houston $25
http://houston.craigslist.org/tls/3386980817.html
http://houston.craigslist.org/tls/3385954684.html
Older Hein-Warner 1.25 ton jack, needs seals, south Houston $25
http://houston.craigslist.org/tls/3386980817.html
brianpgriset
Well-known member
adamsredlines
Well-known member
Looks like it was broke and re-welded a long time ago. Look below the pipe jaw on the left...
87Pomona
Well-known member
Yup, thats a 104. Picked one up last night for $50.
