Found a deal on craigslist? - List Here!

[A&P mechanic]

-Large Blast Cabinet (homebuilt) in Daytona, FL.
-$150
-Looks like its well-built, has a pressurized blasting tank, the cabinets most likely better quality than hf and much bigger. I am going to use this guy’s pictures and build the same one.
http://daytona.craigslist.org/tls/4067854636.html

 

[CudaChick1968]

A&P, put bigger windows in yours (and choose a "standard" size or your replacement glass / laminate will cost a lot). You might also check out the cool blasting gun upgrade kit from TPTools.com.

After literally years of searching CL ads, I finally found a sweet SkatBlast 5 footer in Ohio but really considered building my own for a long time. Keep us posted when you get it going!

 

[zkling]

NOS in box cman block grinder.

So yea, this just popped up on clist. Too rich for my blood, but dang, NOS.

 

[930dreamer]

Steel Fab Table - $250 (Los Lunas)

http://albuquerque.craigslist.org/tls/4082700444.html

 

[CNGsaves]

WHAT: US General 44" roller toolbox (bottom AND Top, plus side cabinet)

WHERE: Rutland, VT

PRICE: $600

http://glensfalls.craigslist.org/tls/4063046282.html

 

[JimmyTheMonkey]

Wilton 450S for $250 basically brand new. Great deal if youre in the Atlanta, GA area.

 

[SRX]

Waterloo Machinist's top box in Acton, MA
$50
http://worcester.craigslist.org/tls/4090231069.html

Looks a bit rough.

 

[CNGsaves]

WHAT: Heavy duty metal cart with large casters

WHERE: Marietta, GA

PRICE: $40 each (has qty 20 available)

Link:
http://atlanta.craigslist.org/wat/tls/4088148876.html

 

[CNGsaves]

WHAT: Porter Cable concrete siding shears - - part number 6604
. . . . . (cuts through Hardiplank like butter)

WHERE: Lula, GA

PRICE: $75 (new in box)

Link:
http://atlanta.craigslist.org/eat/tls/4091324211.html

 

[CNGsaves]

WHAT: Proto 1/2" drive SAE set (16 piece) with box - - part # 54118
(around $200 to $250 new)

WHERE: Tulsa, OK

PRICE: $50

Link:
http://tulsa.craigslist.org/tls/4052889944.html

Please some GJer so snag this as I'm tapped out.

 

[CNGsaves]

WHAT: Lista tool cabinet (6 drawer) 59"H x 45"W x 27.5" D

WHERE: St Louis, MO

PRICE: $200 OBO

Link:
http://stlouis.craigslist.org/tls/4085425991.html

PLEASE . . . some GJer go grab that if you live in area. That's a STEAL !!

 

[mrbreezeet1]

might not be a bad deal,
http://pittsburgh.craigslist.org/tls/4097523887.html

MATCO TOOL BOX LOADEDWITH TOOLS - $3000 (Belle Vernon) (PA)

 

[warmpancakes]

might not be a bad deal,
http://pittsburgh.craigslist.org/tls/4097523887.html

MATCO TOOL BOX LOADEDWITH TOOLS - $3000 (Belle Vernon) (PA)

little work somebody could get that box for free or better, thats a great deal,

 

[bl00]

https://richmond.craigslist.org/tls/4099796575.html

$400

 

[mrbreezeet1]

This is for all you Snap On KR1000 tool box fans.

http://denver.craigslist.org/tls/4056047320.html

https://richmond.craigslist.org/tls/4099796575.html

$400

Wow, Nice looking box for $400.00.

 

[zkling]

Wow, Nice looking box for $400.00.

I'm not real familiar with that box, but it almost seems like way too good of a deal at $400/ Hope someone here that needs a box get its? If so please post pics.

 

[balane]

https://richmond.craigslist.org/tls/4099796575.html

$400

That might be the best deal on a nice toolbox I've ever seen. Wish I lived closer.

 

[Zippercat]

That might be the best deal on a nice toolbox I've ever seen. Wish I lived closer.

Lock drilled out? I'd be concerned that it just "fell off a truck" or something.

 

[jshillin]

https://richmond.craigslist.org/tls/4099796575.html

$400

I hate the color, but I'd be all over it if it was closer.

 

[woodstockva]

Matco brake bleeder (Mityvac rebranded)

$60

http://fredericksburg.craigslist.org/tls/4103467828.html

 

[dakotart1984]

Vintage delta scroll saw, $84.

I dont need one but I think this would be a great deal for someone in the chicagoland area looking to do a restore

http://chicago.craigslist.org/wcl/tls/4093764204.html

 

[EOC_Jason]

Reed 4C - Houston, TX - $250

http://houston.craigslist.org/atq/4104101896.html

Kind of rough condition... Looks it's missing the swivel base and a knob on one of the handles...

I already have one that is in very nice condition... If someone else is interested their posted location is near me so I can grab it for you.

 

[CNGsaves]

WHAT: Mac reversible ratcheting wrench set (8 piece SAE 5/16" to 3/4")

WHERE: Owasso, OK

PRICE: $100

Link:
http://tulsa.craigslist.org/tls/4097305945.html

 

[SRX]

F me! Just when I really do not have any money to spend on something I do not need....

http://boston.craigslist.org/sob/bfd/4100839818.html

"Dealership liquidation. I have 8 Stanley 9 drawer Vidmar bins, 3 seven drawer bins, 2 large locking cabinets, and 2 storage bins that go on top. All bins in good to excellent condition. $300 each or make an offer for the lot.
Call Mark at 508-367-9304"

 

[brianpgriset]

Someone get these.

 

[930dreamer]

Tool Cabinets - $55

http://albuquerque.craigslist.org/tls/4082433845.html

​

 

[osburn383]

F me! Just when I really do not have any money to spend on something I do not need....

http://boston.craigslist.org/sob/bfd/4100839818.html

"Dealership liquidation. I have 8 Stanley 9 drawer Vidmar bins, 3 seven drawer bins, 2 large locking cabinets, and 2 storage bins that go on top. All bins in good to excellent condition. $300 each or make an offer for the lot.
Call Mark at 508-367-9304"

They look to be in new condition to bad its a bit far.

 

[Val_C]

Vise in Mississauga, ON, Canada:
Date Listed 04-Oct-13
Price $25.00
Address Mississauga, ON L5G 1X1, Canada
Bench vise, 6" wide X 6" deep

http://toronto.kijiji.ca/c-buy-and-sell-tools-other-Vise-W0QQAdIdZ530173511

 

[SRX]

Monarch Bench Vise

Leominster, MA

$50

http://worcester.craigslist.org/tls/4111908073.html

 

[SRX]

FREE

Engine stand

Danvers, MA

http://boston.craigslist.org/nos/zip/4113229007.html

 

[Val_C]

Mastercraft top and bottom toolchests
6674 Bedford Road, Sydenham, ON K0H 2T0, Canada
$40

 

[darthchurro]

24" Metal Lathe $800
Ames, Iowa
http://ames.craigslist.org/tls/4116101671.html

 

[bryanrj]

Snap on tool chest stack North Charleston, SC

Snap on stack at pawn shop

http://charleston.craigslist.org/tld/4102173161.html

Top is KRA55A with a KTA-3A tote tray inside, tray dated '91

Next level 3 drawer not Snap On, maybe Matco?

KRA 429F

Bottom KRA 380H

Keys are there.

Tag price on chests is upwards of $670, but Craigslist price is $500. I threw out $350 because I don't live here, just visiting. Sales clerk checked and said lowest they could take would be $425. I may check on it next time I'm around. They got it in July. KRA55 is in good shape, other are fair to good considering they are 90-91 vintage. Took a couple cell phone pics, and will add if they add anything.

 

[zkling]

Nice setup. Only thing. I believe that top is a KRA-56 or 58. The 55 was stopped in the 60's IIRC. It was like a modification of the KRA-58. THe KRA56, 58 and 55 all have the same exterior dimensions.

 

[Double G Construction]

Sewell NJ
Klein bucket bags $20.00 Sounded good to me.

http://southjersey.craigslist.org/tls/4112192512.html

 

[1Garageman]

Sounds strange...... but if true.
A free Snap On would be nice.


AIR RATCHET
I have a working 1/4 in air ratchet(snap on) for someone in need......It is used but works.....Leave number to contact only.....I will not hold and it is first come......I am sure this will go quick...I will leave on the front porch when I have connected with the person that comes to get it.....Thanks

http://columbus.craigslist.org/zip/4117201271.html

 

[bryanrj]

Nice setup. Only thing. I believe that top is a KRA-56 or 58. The 55 was stopped in the 60's IIRC. It was like a modification of the KRA-58. THe KRA56, 58 and 55 all have the same exterior dimensions.

It said kra55a on the back of the box, factory stamp, no date, made in Canada as I recall. The kta-3a inside it was dated '91

 

[CudaChick1968]

It's not on Craig's List but on the Man Stuff page on Facebook ...

Kelly Bull Oliver is selling a SnapOn air hammer and air chisel set, barely used. The set cost $535 new, but he'll take $200 for all. 270.823.6106

Says he's near Murray, Kentucky.

I'm not into air chisels but I'm betting somebody will ****** it up!

 

[Val_C]

Address 2550 Goldenridge Road #34, Mississauga, ON L4X 1L9, Canada
1960 CARD FILE, METAL DRAWERS, 3-DRAWER UNITS. USE INDIVIDUALLY OR STACK. $15 EACH.

PREMIUM USED OFFICE FURNITURE by
SURPLUS TO GREEN LTD.
2550 Goldenridge Road, UNIT 34,
Mississauga L4X 2S3.

OPEN MONDAY TO SATURDAY 10:00 until 5:00.

 

[balane]

Seattle/Tacoma

$100, I don't know the brand but they look like good ones to me. If I had any room in my garage at all I wouldn't be posting this but on the way down there.

TOOL CHEST - $100 (Tacoma)

Tool chest measures 62" high x 30" wide x 29 1/2" deep. Has 8 drawers that are 6 1/4" deep. This is a heavy duty built tool chest. Sitting on a flat dolly for easy mobility. Asking $100.

http://seattle.craigslist.org/tac/tls/4120315338.html

.