Found a deal on craigslist? - List Here!

[PFSard]

Something someone may want to look at.

Matco Tool Chest - $150 (Gilbert)
http://phoenix.craigslist.org/evl/tls/4756200542.html

Matco Rolling Tool Chest
10 Drawer Base Cabinet
9 Drawer Upper Cabinet
$150 OBO
Tools Not Included

 

[beerly]

Brand new MaxJax - $1900 - San Antonio Texas


http://sanantonio.craigslist.org/pts/4759401968.html

 

[tc-cad]

Just picked up 7 wall cabinets, Metal, dimensions 48" x 30" x 12 deep. Only bummer is they came with glass sliding doors. I am going to replace that with steel or any ideas? Then paint them Rustoleum Black and the doors gray like Gladiator cabinets. $20/each. They were lab cabinets used at Miller Brewing.

The wife isn't too happy. But they never are..................

 

[reson46]

Just picked up 7 wall cabinets, Metal, dimensions 48" x 30" x 12 deep. Only bummer is they came with glass sliding doors. I am going to replace that with steel or any ideas? Then paint them Rustoleum Black and the doors gray like Gladiator cabinets. $20/each. They were lab cabinets used at Miller Brewing.

The wife isn't too happy. But they never are..................

Is this something you are selling on CraigsList? You didn't provide a link.

Willy

 

[bubinga]

Just picked up 7 wall cabinets, Metal, dimensions 48" x 30" x 12 deep. Only bummer is they came with glass sliding doors. I am going to replace that with steel or any ideas? Then paint them Rustoleum Black and the doors gray like Gladiator cabinets. $20/each. They were lab cabinets used at Miller Brewing.

The wife isn't too happy. But they never are..................

thin plywood

 

[SRX]

Huh huh.....

http://worcester.craigslist.org/tls/4758411258.html



"Woodworking tool cabinet - $150.00"

 

[greenbikemike]

Nothing to see here

 

[Jeepster425]

Tacoma WA

250$

http://seattle.craigslist.org/tac/tls/4763214570.html

 

[CNGsaves]

Just picked up 7 wall cabinets, Metal, dimensions 48" x 30" x 12 deep. Only bummer is they came with glass sliding doors. I am going to replace that with steel or any ideas? Then paint them Rustoleum Black and the doors gray like Gladiator cabinets. $20/each. They were lab cabinets used at Miller Brewing.

The wife isn't too happy. But they never are..................

I just picked up this Lincoln 140 C Mig for $250.00....I already had a Hobart 140 that I got off of Craigs list last year for $400.00 with the cart,two big spools of wire and some misc. stuff.....now I can do a "side by side" and see what works better for me. I do have gas hooked up. So for $650.00 total,I think I did o.k. Both were like new! I'll sell one of them,but just could'nt pass this one up.

Greenbikemike

^ ^ ^ ^ Sorry guys . . . . you just don't get it !!
Remove posts . . . move your "CL scores" in Garage Sale 2014 thread or something similar.


This THREAD is meant to give Head's Up to other GJer's for bargain you've found that THEY may want to purchase !! READ the First Post that has all the instructions. Thus, INCLUDE pictures and information as follows:

Region: _______________

Location: _____________

Item: ________________

Price: ________________

Link:
______________________________

 

[CNGsaves]

This "fix-er-upper" compressor might be ticket for GJer in Kansas City area whose ready to tackle a project. It's dual compressor with 220v single phase 1 1/2 hp motors.

Region: Midwest USA

Location: Lees Summit, MO

Item: Air compressor 60 gal w/ dual compressor & 1 1/2 HP 220v motors

Price: $ 100

Link:
http://kansascity.craigslist.org/tls/4762725902.html

 

[larryq]

$75 Craftsman drill press in Benicia CA. Looks vintage, and in good shape? (The 'Larry' in the ad isn't me, btw.)

http://sfbay.craigslist.org/eby/tls/4764257553.html

 

[bmxdad]

Red blue point/snapon tool cart - $200 (Burien)

Red sliding top snapon/blue point shop cart. Great cart dont need anymore. 275 . 475 new.

He'll take $150, as I offered that to him, but just bought a HF 5 drawer for $100 ealier
[FONT=&quot]http://seattle.craigslist.org/skc/tls/4755671254.html[/FONT]

 

[bmxdad]

US General 30 in. 5 Drawer 704 lb. Capacity Glossy Red Tool Cart - $140 (Kent)

30 in. 5 Drawer 704 lb. Capacity Glossy Red Tool Cart
WINNER - Best Mechanic's Tool Cart
Truckin' Magazine

Good condition. Has a few small chips in the paint (Pictured). Other than that it is in excellent condition.

Three storage choices in this heavy-duty, all-steel, utility tool cart make it a convenient "rolling workstation" for all your tools. The sturdy tool storage cart can hold up to 704 lb. of tools, yet you can easily roll it to your work area so you'll have everything you need within reach. Super-strong, 14-gauge steel construction has a powder-coated enamel finish that resists rust. All drawers have ball-bearing rails for smooth opening.

http://www.harborfreight.com/30-in-5-drawer-704-lb-capacity-glossy-red-tool-cart-69397.html

http://seattle.craigslist.org/skc/tls/4753521340.html

 

[sgs236]

Region: East

Location: Pittsburgh, PA

Item: Parts Washer

Price: $30

Link: http://pittsburgh.craigslist.org/tls/4764725508.html

 

[greenbikemike]

^ ^ ^ ^ Sorry guys . . . . you just don't get it !!
Remove posts . . . move your "CL scores" in Garage Sale 2014 thread or something similar.


I guess I didn't "get it".....I read the the thread title ......

"Found a deal on craigslist? - List Here!"

So I found a deal and listed what I found,I guess I should have listed the link first and then if it was still around and no one snapped it up,THEN,I could buy it
and list it? I didn't go back to the first post and read up on what the OP meant,
sorry,didn't mean to piss on your Wheaties,carry on,

Greenbikemike

P.S. I didn't buy it at a garage sale soooooo....kinda figured it belonged here

 

[reson46]

P.S. I didn't buy it at a garage sale soooooo....kinda figured it belonged here

Then start a "Stuff I Bought on CraigsList" thread. This is for deals found on CraigsList that somebody else may be interested in buying. Not for bragging about what you found on CraigsList and are not selling.

Willy

 

[CudaChick1968]

Looking for a sweet '57 Belair that just needs to be reassembled???

http://jacksontn.craigslist.org/cto/4763368836.html

 

[bmxdad]

Large Heavy Wilton Bullet Vise - $300 (Parkland)

Wonder if this is a good deal??

Weighs over 90 pounds, about 21" in total length. It is well used, but still in good shape. Please send your phone number if you are interested. Ad will be deleted when sold.

http://seattle.craigslist.org/tac/tls/4765714754.html

 

[sgs236]

Region: East

Location: Pittsburgh, PA

Item: 13 rolls (2 lb per roll) of 0.035 welding wire

Price: $50

Link:http://pittsburgh.craigslist.org/tls/4770111941.html

 

[bmxdad]

US GENERAL 5 DRAWER SERVICE CART - $70 (Everett)

Everett Area

http://seattle.craigslist.org/sno/tls/4770896003.html

US GENERAL 5 DRAWER SERVICE CART IN GOOD CONDITION. Gave up tooling on cars and went back to woodworking. Cart is in good shape and everything work well. I also hace wrenches, sockets, axle nut set, compression tester and more. Give me a call or shoot me an email. Don't bother offering $50 for it. I'll only respond to emails with phone number.

 

[silentpoet]

http://springfield.craigslist.org/tls/4766432274.html

Just in time for Christmas. I have about 40 Used Kennedy rolling tool cabinets. Most are the factory brown. There are a couple that are the red. There are many different drawer combinations. Some have there keys. The cabinets are a little dirty and some have minor surface rust, but they clean up nicely. They are $125.00 each. I also have some of the top boxes for them for an additional charge depending on the box you choose. I also have other rolling tool cabinets available. Phone 573-301-9575 or 573-635-2195

 

[djsadias]

Hey guys any Blacksmiths need to see this!!

http://newhaven.craigslist.org/tls/4770769845.html

 

[Jere]

http://akroncanton.craigslist.org/tls/4770639889.html

Drill press and tapper (delta i think) with cast table $100 Akron
This hurts to not buy it

 

[Piece-it Pete]

That's pretty cool.

Pete

 

[AnthonyJ124]

Two bendpak lifts for $650. If I only had room...

http://providence.craigslist.org/tls/4763832611.html

 

[Uncle_Charlie]

http://fayar.craigslist.org/tls/4767170438.html

I'm not sure if this is a bargain, but there appears to be quite a bit there.

 

[bubinga]

http://akroncanton.craigslist.org/tls/4770639889.html

Drill press and tapper (delta i think) with cast table $100 Akron
This hurts to not buy it

Man, that is nice, wish it was local too.
probably gone.........LOL

 

[bubinga]

http://springfield.craigslist.org/tls/4766432274.html

damm it, another thing I would be all over if it were local.

 

[zkling]

damm it, another thing I would be all over if it were local.

IIRC those were posted earlier on this site at a gov surplus auction. Some of them look OK, others look trashed and weathered. I wonder what the lot went for.

Hey guys any Blacksmiths need to see this!!

http://newhaven.craigslist.org/tls/4770769845.html

I bet the prices are high.

http://akroncanton.craigslist.org/tls/4770639889.html

Drill press and tapper (delta i think) with cast table $100 Akron
This hurts to not buy it

O man I'd be all over that if local. Good setup for small parts.

 

[bmxdad]

Machinest swiveling vice - $150 (kitsap)

Sawyer tool co26 b turn of the century early 1900 s vice very good condition swivel base 150.00 if intested contact me

http://seattle.craigslist.org/kit/tls/4775060441.html

 

[CNGsaves]

Two bendpak lifts for $650. If I only had room...

http://providence.craigslist.org/tls/4763832611.html

That's **** posting . . . . says Posted 15 years ago . . .

Also, READ 1st post in GJ thread with rules for posting:

Region
Location
Price
Description
Link
. . . . . . . AND . . .
Picture !!

 

[AnthonyJ124]

That's **** posting . . . . says Posted 15 years ago . . .



Also, READ 1st post in GJ thread with rules for posting:



Region

Location

Price

Description

Link

. . . . . . . AND . . .

Picture !!

Apologize for that. Was in the middle of sealing up some skylights when a buddy sent me the link. Figured the guys here would rather have the link than nothing at all!

 

[bmxdad]

CL was hacked so linked images are not going to show.

 

[FiendFX]

CL was hacked so linked images are not going to show.

no wonder why its not working. it said something ganster 4 life.

 

[Cypherian]

Hey All :}

If this is not a deal I do not know what is make sure you read the Ad to damn bad it is this close to XMAS or I would take a ride to look at the lathe and such.

http://philadelphia.craigslist.org/gms/4773901825.html



Cypher



image 1image 2image 3image 4image 5image 6




























© craigslist - Map data © OpenStreetMap

durham rd at dark hollow

(google map) (yahoo map)

friday 2014-11-28

start time : 10am

i,m having a garage sale with a ton of tools antiques and neat things mostly for metal working ,
i have a load of lathe and milling machine cutting tools .and all sorts of stuff .its black friday from
10 am till 2 ,beer and chili will be served ,if your wife or girl insist on coming there is an antique
shop across the street with girly stuff .if you have something to sell or trade bring it along .it sure beats
going to the mall with the wifee .early birds will be shot then hung
•do NOT contact me with unsolicited services or offers


post id: 4773901825

posted: 2 days ago

email to friend

♥ best of [?]


Avoid scams, deal locally Beware wiring (e.g. Western Union), cashier checks, money orders, shipping.

 

[bubinga]

Hey All :}

If this is not a deal I do not know what is make sure you read the Ad to damn bad it is this close to XMAS or I would take a ride to look at the lathe and such.

http://philadelphia.craigslist.org/gms/4773901825.html





start time : 10am

i,m having a garage sale with a ton of tools antiques and neat things mostly for metal working ,
i have a load of lathe and milling machine cutting tools .and all sorts of stuff .its black friday from
10 am till 2 ,beer and chili will be served ,if your wife or girl insist on coming there is an antique
shop across the street with girly stuff .if you have something to sell or trade bring it along .it sure beats
going to the mall with the wifee .early birds will be shot then hung

Yeah, he is funny. he goes, "its black friday from
10 am till 2 ,beer and chili will be served ,if your wife or girl insist on coming there is an antique
shop across the street with girly stuff ."
I wish it were in My area.
I have been to about 2 or 3 garage sales like that,
I called them the "mother load" of Garage sales.

 

[1Garageman]

Commercial air compressor 120 gal 3 phase. Asking $500.00 o.b.o call bill at 614-307-2640

http://columbus.craigslist.org/tls/4776696478.html


My dream air compressor!

 

[CNGsaves]

^ ^ ^ Motor plate says 230 volt / 22 amp / 1 PHASE . . . . you might want to reconsider, and go negotiate before Turkey day !!

Is that a Quincy pump ??

 

[ihateminimumwage]

9-1/2 foot long box for $3k in middle of WA state.
http://spokane.craigslist.org/tls/4754216224.html

Could probably use another set of casters in the center...

 

[Fordman7795]

9-1/2 foot long box for $3k in middle of WA state.
http://spokane.craigslist.org/tls/4754216224.html


Could probably use another set of casters in the center...

LOL I had the screen scrolled down just far enough to where I could not see your last line. I said to myself, holy **** that needs a set of casters in the center.