Found a deal on craigslist? - List Here!

[mrbreezeet1]

******** it! I'd be all over that if it were closer

I didn't figure it would last, looks like it's gone.

 

[ezriderga]

******** it! I'd be all over that if it were closer

Me too

 

[gsingh]

http://washingtondc.craigslist.org/mld/zip/4336268022.html

Free Honda Motorcycles (Ashton/Olney)

 

[gsingh]

http://washingtondc.craigslist.org/nva/tls/4327237757.html

Thorsen Tool Set # 3814 $30.00 - $30 (Alexandria, Va)

 

[FOCUS.FREAK]

Talk about a deal that won't last long!

http://chicago.craigslist.org/nwi/tls/4336215462.html

 

[mcmlvif100]

Not affiliated and too far for me but looks to be in pretty nice shape and all there.

6 " bench grinder - $25 (noblesville)

http://indianapolis.craigslist.org/tls/4336096250.html


6" dual wheel bench grinder. craftsman. can be reached at 317 727 3971. phone or text. if by email, add pink pony to the subject, or i will not respond. thanks, paul

 

[mrbreezeet1]

Not affiliated and too far for me but looks to be in pretty nice shape and all there.

6 " bench grinder - $25 (noblesville)

http://indianapolis.craigslist.org/tls/4336096250.html


6" dual wheel bench grinder. craftsman. can be reached at 317 727 3971. phone or text. if by email, add pink pony to the subject, or i will not respond. thanks, paul

looks brand new looking.............

 

[balane]

Handsome grinder. Nice deal.

 

[Sleipnir]

http://hartford.craigslist.org/tls/4336045051.html

The bandsaw/scroll saw for $25/ea kinda caught my eye, going to look tomorrow

Any thoughts?

 

[riggs1117]

http://pittsburgh.craigslist.org/tls/4285975958.html

Fifty bucks for a nice old vise

 

[mrbreezeet1]

http://pittsburgh.craigslist.org/tls/4285975958.html

Fifty bucks for a nice old vise

looks nice,
45 miles east of pittsburgh, Or I would probably go get it.
good 2 hours from me.

 

[arnwoodwheels]

Nice grinder stand in San Diego $30.00

Some one should get this. $30.00
Cant tell if the grinder is a US made or import but it is on a nice stand.
Floor jack and jumpers are not too bad ether
I have the same jack pre harbor freight it has lasted me 20 plus years

http://sandiego.craigslist.org/nsd/tls/4339232357.html

 

[mrbreezeet1]

Re: Nice grinder stand in San Diego $30.00

Some one should get this. $30.00
Cant tell if the grinder is a US made or import but it is on a nice stand.
Floor jack and jumpers are not too bad ether
I have the same jack pre harbor freight it has lasted me 20 plus years

http://sandiego.craigslist.org/nsd/tls/4339232357.html

for sure, I just paid $80.00 something at enco, well I think $66.00 something with the -20%
But that is just for the stand.

 

[gtermini]

Found a compressor for $100.

http://portland.craigslist.org/yam/hvo/4338066477.html

I have the exact same compressor, a touch cleaner, and paid $650 happily. About 18 cfm and not too loud.

Greyson

 

[sgs236]

Region East

Location: Pittsburgh

Item: MAC TOOLBOX

Price:$600

Link: http://pittsburgh.craigslist.org/tls/4340474564.html

 

[mrbreezeet1]

Mac tool box is not bad, in my area too,but not in the market any more,since l got my as new big craftsman set for $300.00!

 

[jim2664258]

Something for you vice fiends in the Raleigh area: http://raleigh.craigslist.org/tls/4340674439.html

 

[exmaxima1]

Nice drill press 50 miles west of Chicago:

http://chicago.craigslist.org/wcl/tls/4340635795.html

 

[sgs236]

These Craftsman 150 drill presses don't come up for sale very often in this area. I don't expect it to last long.

Region East

Location: Pittsburgh

Item: CRAFTSMAN 150 Drill Press

Price:$195 OBO

Link: http://pittsburgh.craigslist.org/tls/4341158518.html

 

[BD1]

Combo Belt Disc Sander - $125 (Plano) looks like 12'' disc and 6''x48'' belt
http://chicago.craigslist.org/wcl/tls/4341324168.html

Yates American Combination disc/belt sander made in Beloit Wisconson still works fine.
Location: Plano

 

[Sleipnir]

http://hartford.craigslist.org/tls/4340902982.html

$25 for a rolling cabinet, craftsman.

Really needing to save up money otherwise I'd just get it for my dad's power tools so I don't have to see them..

 

[1Garageman]

chicago pneumatic 30 gallon air compressor with assortted air tools - $60 (groveport )


© craigslist - Map data © OpenStreetMap
(google map) (yahoo map)

I have for sale a Chicago pneumatic air compressor 30 gallon works perfect. Will let a couple air tools go with it. Die grinder and.couple other tools..asking 60 for everything. Comes with air hose. Text or call for pics.need gone soon moving and.don't have room at new place 614- seven four three- 9190 ask for Josh. I.can meet you somewhere if needed thx

http://columbus.craigslist.org/tls/4341406552.html

 

[mrbreezeet1]

These Craftsman 150 drill presses don't come up for sale very often in this area. I don't expect it to last long.

Region East

Location: Pittsburgh

Item: CRAFTSMAN 150 Drill Press

Price:$195 OBO

Link: http://pittsburgh.craigslist.org/tls/4341158518.html

Yeah, looks good, I was gonna post that, beat me to it.

 

[mrbreezeet1]

Combo Belt Disc Sander - $125 (Plano) looks like 12'' disc and 6''x48'' belt
http://chicago.craigslist.org/wcl/tls/4341324168.html

Yates American Combination disc/belt sander made in Beloit Wisconson still works fine.
Location: Plano

Yates American is a damm good sander, someone go get it.
If it was local. it would be in my garage already, I guess the delta 6X 48 and The PM 6X48 arn't enough...............LOL

 

[Hpozzuoli]

I need help in making my mind up. I finally talked to the guy with this snap on cabinet. He wants to sell the pullers and cabinet together. He said he is firm on $500. What do you guys think. Just cause he says he's firm doesn't mean I won't meet him and offer him less on the spot. He isn't that far from me. I just need to know what is fair.

http://southcoast.craigslist.org/tls/4324435699.html

 

[tinkergeek]

FREE "95 mustang for scrap (no title!)just body "
[location St Louis Metro area, MO]

"95 mustang been parted out pretty much just body no axles motor . Do not call unless u can immediately haul off u must have a trailer to get this out of my garage sine there is no axles on it. I will remove once its picked up . I live in Arnold by 141&21 thanks Robert 6363759129
do NOT contact me with unsolicited services or offers"

http://stlouis.craigslist.org/zip/4343542386.html

Not mine but thought somebody would like it.

 

[freakinout]

never thought i'd say this but : ' i wish i was in Texas"
https://austin.craigslist.org/zip/4343167047.html

 

[upgrading]

Johnny Lee suddenly pops into my head singing.

 

[KerryH]

Can anyone tell me about this vice? It appears to be a "milling" vise but I'm not very familiar with the type. Roughly what would it be worth?

 

[mrbreezeet1]

IDK what is is worth, Would not mind having it though. I do like the bathroom faucet handle re purposed for a ball crank.
(Serious, I do, Not being sarcastic)
I did that with some vintage faucet knobs for a delta sander.
They used to use a very similar looking knob from the factory.

 

[mrbreezeet1]

chicago pneumatic 30 gallon air compressor with assortted air tools - $60 (groveport )


© craigslist - Map data © OpenStreetMap
(google map) (yahoo map)

I have for sale a Chicago pneumatic air compressor 30 gallon works perfect. Will let a couple air tools go with it. Die grinder and.couple other tools..asking 60 for everything. Comes with air hose. Text or call for pics.need gone soon moving and.don't have room at new place 614- seven four three- 9190 ask for Josh. I.can meet you somewhere if needed thx

http://columbus.craigslist.org/tls/4341406552.html

That would have been sweet to get for $60.00. It's Gone, No surprise there.

 

[mrbreezeet1]

Yeah, looks good, I was gonna post that, beat me to it.
http://pittsburgh.craigslist.org/tls/4341158518.html

Actually looks like it's still available.
I have the bench top version.
Can't go wrong with that model D/P.

 

[JeremyBurke]

Here is a nice little Hien-Werner jack in portland for $50. I'd buy it myself but I just got one yesterday from a different seller.

http://portland.craigslist.org/mlt/tls/4343491730.html

 

[Sleipnir]

Found this for $25, he says it's smooth and I have no idea who makes it but it looks like a pretty decent deal. Thoughts?

 

[upgrading]

Might not be a hot deal, but looks cool.

COLLECTIBLE ... SNAP ON Refrigerator /Dry Bar - $490 (Middleton,NH)
SNAP ON Fridge/Dry Bar $490. Includes 4 Snap On beer mugs!!!

http://boston.craigslist.org/gbs/tls/4344781360.html

 

[freakinout]

Might not be a hot deal, but looks cool.

http://boston.craigslist.org/gbs/tls/4344781360.html

I have one of these, also bought brand new on CL for $100 in Philly area a couple years ago. made by craftworks if i remember correctly. love to see the look on friends faces when i tell them to go into garage and grab a beer out of fridge....

 

[larryq]

Found this for $25, he says it's smooth and I have no idea who makes it but it looks like a pretty decent deal. Thoughts?

A photo of the other side would help but if I had to guess, it's a Chas Parker. For $25 I'd be over there now, knocking on his door. If you do get it, we'll need pics!

 

[mrbreezeet1]

A photo of the other side would help but if I had to guess, it's a Chas Parker. For $25 I'd be over there now, knocking on his door. If you do get it, we'll need pics!

Right, it's like
" You haven't brought it yet"?

 

[Sleipnir]

The guy is busy til tuesday and it may snow.. been on cl for a month so I doubt someones gonna sneak it from me

 

[Hpozzuoli]

Here's the elusive dealer box in Naples Florida. I was looking in that area cause the wife and daughter are down there this week looking for a winter getaway type place. Just looking at the local market and found this.

http://fortmyers.craigslist.org/col/tls/4335786102.html