Found a deal on craigslist? - List Here!

[dkroth]

I don't know if this is a deal, but it is interesting:

THOUSANDS new sockets wrenches bits ETC - $600



http://rochester.craigslist.org/tls/5707081553.html

 

[PFSard]

I'm uncertain as to how good a deal these are, but in case anyone is interested in Stanley Vidmar Cabinets :

Stanley Vidmar Industrial Storage Cabinet - $300 (NE Mesa)
http://phoenix.craigslist.org/evl/tls/5708127805.html

Stanley Vidmar industrial storage cabinets with 400+ pound capacity per shelf - 12 available.

These are the heavy duty 60" wide storage cabinets that are used in industrial settings, manufacturing, equipment repair, mining, armories, and deploy with our military. (59" height and 27 1/4" depth). Locks can be easily added to any of these cabinets.

$300 per 3 shelf cabinet - 9 available
$225 per 1 shelf cabinet - 2 available
$175 for a cabinet with no shelves - 1 available

 

[firworks]

At 400$ I'm not sure I can afford NOT to get this!

*CUSTOM!* 1987 Toyota Camry *MUST SEE* - $400 (Manito)
http://peoria.craigslist.org/cto/5678792644.html
View media item 62230

 

[bennymic]

Durable steel table with drawers (Oakton) Free! in northern VA

This table is very strong and can withstand big weights. Great surface for garage projects.
Free to whomever would like to put it to use. The big drawer on right is for files.

 

[Joes89yj]

Nice bench top Atlas DP here in KC. IF I didn't just buy my Craftsman 150 I'd be getting this one.

http://kansascity.craigslist.org/tls/5712049630.html



Sent from my iPhone using Tapatalk

 

[larryq]

Looks like a great deal on that Atlas DP for $75. If I weren't 2000 miles away I'd be calling the guy. Thanks for sharing it.

 

[larryq]

Here's a 1 HP Baldor 'washdown duty' motor for $50 in Alameda CA, in brand new condition per the OP. It's 3450 RPM, so too fast for a drill press (probably too heavy as well, given it's a 1 HP unit, though it is Frame type 56C). Still-- $50 for a new 1 HP 120/240v Baldor is hard to pass up.

This guy's been dropping his price daily, so it's at rock-bottom now, better jump if you're going to do so.

http://sfbay.craigslist.org/eby/tls/5708961428.html

 

[Jeepster425]

About half price

DeWalt DW715 Compound Miter Saw 12" - $150 (Spokane Valley)

https://spokane.craigslist.org/tls/5712082275.html


Sent from my SM-G925T using Tapatalk

 

[Jeepster425]

About half price

DeWalt DW715 Compound Miter Saw 12" - $150 (Spokane Valley)

https://spokane.craigslist.org/tls/5712082275.html


Sent from my SM-G925T using Tapatalk

Sent from my SM-G925T using Tapatalk

 

[bubinga]

Here's a 1 HP Baldor 'washdown duty' motor for $50 in Alameda CA, in brand new condition per the OP. It's 3450 RPM, so too fast for a drill press (probably too heavy as well, given it's a 1 HP unit, though it is Frame type 56C). Still-- $50 for a new 1 HP 120/240v Baldor is hard to pass up.

This guy's been dropping his price daily, so it's at rock-bottom now, better jump if you're going to do so.

http://sfbay.craigslist.org/eby/tls/5708961428.html

Yes, Damn good deal!
Purr...fect for a Jointer.
Here is a Nice Delta wood lathe, In Pittsburgh area.
Delta 36 in. wood lathe - $350

http://pittsburgh.craigslist.org/tls/5709692560.html

 

[larryq]

1950s Craftsman jointer/planer for $40 in San Pablo CA. Looks like it's in pretty good shape, includes a motor...and is $40, did I mention?

http://sfbay.craigslist.org/eby/tls/5718523024.html

"Vintage Craftsman Planer from the 1950s
6 1/8" blade
Motor works well. Belt needs to be replaced.
Includes and extra (new) set of blades.
Always stored indoors

Giveaway price - $40"

 

[larryq]

Looks like a nice vintage (Atlas?) drill press for $105 in west San Jose, CA.

http://sfbay.craigslist.org/sby/tls/5719100593.html

 

[Shiftless]

1950s Craftsman jointer/planer for $40 in San Pablo CA. Looks like it's in pretty good shape, includes a motor...and is $40, did I mention?

http://sfbay.craigslist.org/eby/tls/5718523024.html

"Vintage Craftsman Planer from the 1950s
6 1/8" blade
Motor works well. Belt needs to be replaced.
Includes and extra (new) set of blades.
Always stored indoors

Giveaway price - $40"

larryq:
Why do these super deals always pop up when I am hundreds of miles away from home??

That seller is only 5 miles from my house!

 

[larryq]

larryq:
Why do these super deals always pop up when I am hundreds of miles away from home??

That seller is only 5 miles from my house!

They're waiting for you to leave before popping these up, it's the only answer. If you like I can email, and see if I can drop $40 on him till you get back.

 

[MattVette89]

Not a steal, but looks like a good older box:

Chicago suburbs
Older Matco stacked toolbox $350

http://chicago.craigslist.org/wcl/tls/5719987300.html

Needs a cleanup, buy I'd buy that box at $250 all day long. Not sure how much he's willing to haggle.

 

[SEV22XS]

Somebody ****** this up almost seems to good to be true. I've been looking for something similar but now isn't the right time for me ! http://denver.craigslist.org/tls/5721099366.html

 

[larryq]

Not a steal, but looks like a good older box:

Chicago suburbs
Older Matco stacked toolbox $350

http://chicago.craigslist.org/wcl/tls/5719987300.html

Needs a cleanup, buy I'd buy that box at $250 all day long. Not sure how much he's willing to haggle.

$250 would be an excellent deal, and $350 is good too. Nice box, thanks for posting it.

 

[cdeer001]

Large Granite surface plate -offer cash/trade - $150 (Alexandria Virginia, mt. Vernon)

Laboratory grade AA granite surface plate.
24" x 36" x6" thick
Approx. 450lbs
Excellent condition, no cracks, scratches or gouges.
White marks are superficial from securing straps.
has clamping edges
I can load to your truck or trailer.
No emails answered.
Cell 571.572.08seven7
Must sell or trade for gun safe or something interesting.

http://washingtondc.craigslist.org/nva/tls/5724052913.html

 

[Shiftless]

Large Granite surface plate -offer cash/trade - $150 (Alexandria Virginia, mt. Vernon)

Laboratory grade AA granite surface plate.
24" x 36" x6" thick
Approx. 450lbs
Excellent condition, no cracks, scratches or gouges.
White marks are superficial from securing straps.
has clamping edges
I can load to your truck or trailer.
No emails answered.
Cell 571.572.08seven7
Must sell or trade for gun safe or something interesting.

http://washingtondc.craigslist.org/nva/tls/5724052913.html

Lab grade means the block was milled to one ten thousandth of an inch tolerance!
Does everybody realize that those cost almost 2 grand new?
I was just in Alexandria VA 3 weeks ago! Overweight baggage wouldn't have worked out though...

 

[larryq]

Block grinder in Redwood City CA for $40. 1/3 HP, with the lamp and quench tray.

http://sfbay.craigslist.org/pen/tls/5725090839.html

 

[Shiftless]

Nice find Larry!
It won't last long at that price. I alerted a nearby GJ member and hope he gets it.

 

[larryq]

Nice find Larry!
It won't last long at that price. I alerted a nearby GJ member and hope he gets it.

Glad to hear, hope he snags it.

 

[Zippercat]

Vintage Craftsman 150 drill press and stand near Nashville:

https://nashville.craigslist.org/tls/5727971326.html

 

[torqueman2002]

I can't be sure of the brand (Remline?), but if I needed a box, I'd be tempted.

$100 - SE Michigan. < 1 hour ago.

http://detroit.craigslist.org/wyn/tls/5730363406.html

 

[torqueman2002]

Nice find Larry!
It won't last long at that price. I alerted a nearby GJ member and hope he gets it.

That's a good price ($40) for San Francisco.

I just checked - the price is now $50. Now it is a fair price. IMO

 

[Shiftless]

That's a good price ($40) for San Francisco.

I just checked - the price is now $50. Now it is a fair price. IMO

Don't you just love it when a Craigslist seller puts up an ad and gets emails right away offering to buy it, then decides he must have listed it too low so he ignores the first emails and raises the price?

 

[Jeepster425]

Seems to be abut 3-400 for used ones, 800+ on amazon
Grizzly 1 1/2 hp shaper - $100 (Minden)

https://spokane.craigslist.org/tls/5731219289.html

Sent from my SM-G925T using Tapatalk

 

[Shiftless]

Craftsman ball bearing top and middle $35 for both boxes
In San Rafael Marin county CA

http://sfbay.craigslist.org/nby/tls/5732319506.html

 

[bubinga]

Craftsman ball bearing top and middle $35 for both boxes
In San Rafael Marin county CA

http://sfbay.craigslist.org/nby/tls/5732319506.html

Wow!!
Wow on this too,
I didn't see it till today, or I would have posted it,
I didn't have the money.
Was $50.00

 

[larryq]

I can't be sure of the brand (Remline?), but if I needed a box, I'd be tempted.

$100 - SE Michigan. < 1 hour ago.



http://detroit.craigslist.org/wyn/tls/5730363406.html

Yes, it's a Remline. A good, solid unit for $100.

 

[larryq]

Don't you just love it when a Craigslist seller puts up an ad and gets emails right away offering to buy it, then decides he must have listed it too low so he ignores the first emails and raises the price?

Looks like the ad is still up-- seller may have outfoxed himself.

 

[S4cruiser]

I'd buy this but no time to make the drive to CLT in the next couple weeks.

http://charlotte.craigslist.org/tls/5732697662.html

 

[Vbwiley92]

I'd buy this but no time to make the drive to CLT in the next couple weeks.

http://charlotte.craigslist.org/tls/5732697662.html

This is awfully tempting.

Sent from my SM-T320 using Tapatalk

 

[Joes89yj]

I don't have time to pick this up.... so onto the next person...

craftman three tier toolbox - $100 (waldo)

https://kansascity.craigslist.org/tls/5733097240.html

 

[MEngineer]

Arilington/Seattle

Snappy Box set top and bottom.

Price $350.

Question, is it worth it? Do these boxes have ball bearing slides?

http://seattle.craigslist.org/sno/tls/5718849616.html

 

[torqueman2002]

I don't have time to pick this up.... so onto the next person...

craftman three tier toolbox - $100 (waldo)

https://kansascity.craigslist.org/tls/5733097240.html

That's a classic, well made CM set from the 70s.

Great price and with the hard to find middle box.

 

[Joes89yj]

That's a classic, well made CM set from the 70s.

Great price and with the hard to find middle box.

Yep! Also says hes going to throw in some tools... it's literally 3mi from the office... I just drove the wrong vehicle today.

 

[a52-830]

Arilington/Seattle

Snappy Box set top and bottom.

Price $350.

Question, is it worth it? Do these boxes have ball bearing slides?

http://seattle.craigslist.org/sno/tls/5718849616.html

based on the snapon emblem plate, it is a friction box. kr533/558? here is a page from the 1975 catalog:
http://www.collectingsnapon.com/catalogs/catalogs.php?loggedin=0&catalogPage=2988

he mentions the top and bottom being on a rolling frame. don't know what is up with that, there should be casters bolted to the bottom.

is it worth it? if you are happy with it looking like that, probably. if you are willing to put in the effort to make it prettier, likely.

it is likely that the friction slides are still available for that box from snapon, if you need replacements. replacements for the channel attached to the box and drawers are not, and don't seem to be available elsewhere. you would likely need to fabricate some new ones yourself, or get someone to do it, if any of them been to be replaced.

go take a look at it. open and close *every* drawer. be suspicious if a few "stick", but "just need to be cleaned up".

and dont obsess about the locks. replacement keys are available if you can read the number printed on the front, and entirely new ones are available from snapon. even the new fancy ones were drop in replacements for my 1979 kr550/555 set.

 

[MEngineer]

A52-830, thank you for the info and thoughts. I am busy this week, but if it is still available this weekend, I may have a look at it.

 

[a52-830]

A52-830, thank you for the info and thoughts. I am busy this week, but if it is still available this weekend, I may have a look at it.

usually letting these kinds of things sit for awhile is a good idea, if you are not hot to get it. if you and look at it, and aren't feeling "the joy", or it looks like there is significant work to be done, explain that to them, and see if you can agree on a price that makes everyone comfortable.