Found a deal on craigslist? - List Here!

[macgee]

Free!

https://sandiego.craigslist.org/esd/zip/d/jamul-free-metal-lathe/6958844805.html

Oh man, I have that exact same lathe, it's a Honden Lathe and been looking for years to get one or two parts off one. Great little secondary lathe that was really well made, accurate, smooth and direct copy of the Austrian Emco Compact 8. Should have looked at my emails sooner, I would have done the drive.

Nice find and hope someone on GJ scored it.

 

[macgee]

Logan Quick Change lathe MDL: 825-1 - $600 (Arcadia)

For west coast GJ members. Hard to tell quality until looked at and looks a little low on tooling. Price looks negotiable. Could be a good deal after cleaning up and lower price. The 14" South Bend above is a smoking deal if it can keep tolerances and tool holders are included.


https://losangeles.craigslist.org/sgv/tls/d/arcadia-logan-lathe-825-1/6956061243.html

 

[Indexmill]

Delta Unifence Head in Raleigh

Excellent condition (like new) Delta Unifence head.

https://raleigh.craigslist.org/tls/d/raleigh-delta-unifence-parts/6961721398.html

 

[bubinga]

Logan Quick Change lathe MDL: 825-1 - $600 (Arcadia)

For west coast GJ members. Hard to tell quality until looked at and looks a little low on tooling. Price looks negotiable. Could be a good deal after cleaning up and lower price. South Bend above is a smoking deal if it can keeps tolerances and tool holders are included.


https://losangeles.craigslist.org/sgv/tls/d/arcadia-logan-lathe-825-1/6956061243.html

Good price for that with the quick change gear box and everything?
(Still on there too)
I have the 10" with manual change gears, (Logan/Wards) but I did the wiper motor leadscrew conversion. It's pretty slick.
Sadly, since I moved everything is crammed in the garage, I was better off at My old place. hindsight is 20/20

 

[ericlar80]

1950's Craftsman Compressor for Painting. Pretty cool looking; would like to see it cleaned up.

https://ventura.craigslist.org/tls/d/ventura-vintage-craftsman-paint-sprayer/6964074806.html

 

[dkroth]

I like Wiha screwdrivers.









.

 

[trijeff]

Looks like a Dake but not certain, but here's a 3 ton ratcheting arbor press for $40 (which is just a RIDICULOUS deal). Would be all over this if I didn't already have one. Looks like they're including all of the various jigs, too.

https://sacramento.craigslist.org/tls/d/granite-bay-arbor-press-3-ton/6964154755.html



Sent from my Moto G (5) Plus using Tapatalk

 

[macgee]

Looks like a Dake but not certain, but here's a 3 ton ratcheting arbor press for $40 (which is just a RIDICULOUS deal). Would be all over this if I didn't already have one. Looks like they're including all of the various jigs, too.

https://sacramento.craigslist.org/tls/d/granite-bay-arbor-press-3-ton/6964154755.html

That's actually from the other side of the pacific but good find and a smoking cheap price. A big capacity and has the ratchet crank.

 

[tool_scrounge]

Snapon top and bottom tool box : KR 537A, KR 557B

Location: Los Angeles, california

$550

https://losangeles.craigslist.org/lac/tls/d/alhambra-snap-on-tool-boxes-top-bottom/6953084812.html

 

[wingnutthehutt]

WEST, California, San Francisco Bay Area - FREE wood lathe and misc tools. I have always wanted to get into this but don't have the time.

https://sfbay.craigslist.org/eby/zip/d/danville-2-lathes-tools-joiner-dresser/6964399980.html

 

[wingnutthehutt]

And apparently there's a metal lathe for free up in Santa Rosa. No details or pics, but it's free.

https://sfbay.craigslist.org/nby/zip/d/santa-rosa-free-tools/6963230461.html

 

[bubinga]

Looks like a Dake but not certain, but here's a 3 ton ratcheting arbor press for $40 (which is just a RIDICULOUS deal). Would be all over this if I didn't already have one. Looks like they're including all of the various jigs, too.

https://sacramento.craigslist.org/tls/d/granite-bay-arbor-press-3-ton/6964154755.html



Sent from my Moto G (5) Plus using Tapatalk

That's actually from the other side of the pacific but good find and a smoking cheap price. A big capacity and has the ratchet crank.

Sweet!

 

[bubinga]

Northfield Bandsaw 36" - $950

https://buffalo.craigslist.org/tls/d/buffalo-northfield-bandsaw-36/6963786517.html

.

Sweet. I'd love to have that!

 

[SRX]

Freebie

Woburn, MA

https://boston.craigslist.org/nos/zip/d/woburn-vintage-1940s-art-metal-index/6965166996.html

 

[JohnKal]

Mac tool boxes $1500

https://utica.craigslist.org/tls/d/fultonville-mac-toolboxes/6966651290.html

 

[superduty1]

Mac tool boxes $1500



https://utica.craigslist.org/tls/d/fultonville-mac-toolboxes/6966651290.html

I'm no expert, but based on what i usually see in CL that looks like a smoking deal.

Sent from my SM-G973U using Tapatalk

 

[BajaScout]

Unimat SL Lathe - $200

https://sandiego.craigslist.org/csd/tls/d/lemon-grove-unimat-sl-lathe/6968572813.html

 

[dkroth]

I like Wiha screwdrivers.









.

 

[trijeff]

wow that Speedaire is just a RIDICULOUS deal, nice spotting on that one, someone is really going to luck out

Sent from my Moto G (5) Plus using Tapatalk

 

[bubinga]

https://rochester.craigslist.org/tls/d/north-chili-air-compressor-60-gal/6968457351.html

Speedaire 60 Gallon Compressor $150

.

wow that Speedaire is just a RIDICULOUS deal, nice spotting on that one, someone is really going to luck out

Sent from my Moto G (5) Plus using Tapatalk

Smoking Hot Deal...............OT but, LOL I had a Moto G (5) till i busted the screen....... Dropped it into my coffee, was smacking it on my pants, and dropped it and busted the screen. (It was just the 16 GB internal storage, I got one that's 32 GB now.

 

[NYBODYMAN]

https://hudsonvalley.craigslist.org/tls/d/hughsonville-vice/6969787183.html

Not sure what brand of vise this is but the price seems good to at least inquire.

 

[NYBODYMAN]

https://hudsonvalley.craigslist.org/tls/d/spring-valley-1991-gold-tool-award/6972020098.html

Not too far from me but not a convenient time to get it. Pretty cool for $10.

 

[dkroth]

I like Wiha screwdrivers.







.

 

[bubinga]

"Will accept a reasonable offer."

I'm sure the $10 is click bait. This listing will probably end up over in the craigslist morons thread.
.

Yep, will accept reasonable offer tells it there.

 

[Shelbylex]

FREE CRAFTSMAN CREEPER, Needham, MA

https://boston.craigslist.org/bmw/zip/d/needham-craftsman-auto-creeper/6974403747.html

 

[bl00]

Snap On taco cart for $160 south of Baltimore.
https://baltimore.craigslist.org/tls/d/severna-park-snapon-vintage-tool-cart/6974436794.html

 

[454ragtop]

3 swivel base vises, $25, includes an art deco parker https://newlondon.craigslist.org/tls/d/stonington-3-small-bench-vises-for/6974060123.html

 

[bl00]

Snap On KRA 300 for $65 in Richmond, VA. It's the one with the aluminum roll up door.

https://richmond.craigslist.org/tls/d/richmond-snap-on-tool-box/6952582117.html

 

[Shiftless]

Well made 4 foot wide woodworking bench with really nice end vise for $75
Santa Rosa CA

https://sfbay.craigslist.org/nby/tls/d/santa-rosa-woodworking-bench-with-vice/6976822300.html

 

[1Garageman]

^^ That is really nice looking

 

[JohnKal]

Anyone need a FREE Boring Mill?





https://ithaca.craigslist.org/zip/d/lansing-lucas-horizontal-boring-mill/6976973141.html

 

[jdewitt]

Anyone need a FREE Boring Mill?





https://ithaca.craigslist.org/zip/d/lansing-lucas-horizontal-boring-mill/6976973141.html

That's probably north of $2k just for the scrap steel if it can't be fixed or put to work. I wonder what it would cost to get it moved.

 

[Shiftless]

That's probably north of $2k just for the scrap steel if it can't be fixed or put to work. I wonder what it would cost to get it moved.

Probably a bit further north of your 2K estimate. Otherwise we wouldn’t be looking at that ad.

I attended an auction of an old time machine shop that had lots of obsolete monster machines like that. Many items didn’t get bid on even though bidding started at $5. Terms were you had to move the things out within 48 hours and couldn’t do any disassembly on site.
I was there for the old vises but those went for crazy high prices even before figuring in the various premiums charged by the auction house.

 

[macgee]

Scrap price for that machine should be approx. $2,150.00 in NY, maybe less. Most of it is cast iron. $0.025-$0.05 per pound.

Actual weight: 35,000-42,000 lbs.

Cant see anyone with the type of needed machinery and labor to lift it and haul it away would deal with the time and expense of moving 18 tons of scrap for just $2,150 but I could be very wrong.

Maybe a crew heading home from another job, the mill and scrap yard is on the way and they could use some beer money.

 

[1Garageman]

I am not sure how good of a deal this is, but it definitely caught my eyes! I Might have to send this to my dad and see what he things, he could use an upgrade.

https://columbus.craigslist.org/tls/d/reynoldsburg-yates-american-variable/6973049198.html

Yates American Variable Speed 12” Lathe 220v 1ph Cast Iron - $400
220v 1ph Variable speed lathe in good running condition...Just needs paint! Comparable to Delta & Powermatic, Yates American made good quality machines. Nothing wrong with this lathe....I just found a deal on a slightly bigger one. Come out and take a look!

 

[bubinga]

I am not sure how good of a deal this is, but it definitely caught my eyes! I Might have to send this to my dad and see what he things, he could use an upgrade.

https://columbus.craigslist.org/tls/d/reynoldsburg-yates-american-variable/6973049198.html

Yates American Variable Speed 12” Lathe 220v 1ph Cast Iron - $400
220v 1ph Variable speed lathe in good running condition...Just needs paint! Comparable to Delta & Powermatic, Yates American made good quality machines. Nothing wrong with this lathe....I just found a deal on a slightly bigger one. Come out and take a look!

Very nice machine.
I think it's a good deal.
Reminds me of my Oliver.

 

[sgs236]

Region: East

Location: Pittsburgh

Item: Kennedy Tool Cart

Price: 40 dollars

Link: https://pittsburgh.craigslist.org/tls/d/glenshaw-kennedy-tool-cart/6981885959.html

 

[michaelwolson]

14" Delta Bandsaw

Campbell, CA

$110.00

https://sfbay.craigslist.org/sby/tls/d/san-jose-band-saw-classic/6982078187.html

I already have this model but I paid a lot more for mine. I would probably buy it otherwise...

 

[bubinga]

14" Delta Bandsaw

Campbell, CA

$110.00

https://sfbay.craigslist.org/sby/tls/d/san-jose-band-saw-classic/6982078187.html

I already have this model but I paid a lot more for mine. I would probably buy it otherwise...

Nice! I have one like it too, Had the wood blade guard, I had to make one.
Mine is from 1966.

 

[zekgb64]

Quincy 216 compressor for $55, I have the identical unit which I believe was sold by Binks. Super quiet and a great replacement for a modern 3400 rpm buzz bomb if you have modest air needs.

https://sfbay.craigslist.org/sby/tls/d/gilroy-air-compressor-v-belt-drive/6979209423.html