Found a deal on craigslist? - List Here!
- Thread starter markf4e
- Start date
bubinga
Well-known member
Crabman
Well-known member
Geo,
You **** for sure, congrats!
You **** for sure, congrats!
MATCO too chest with a Bonney/Utica bottom cabinet with wheels. Wish I was closer I need that botton cabinet.
Tool Chest & Cabnet - tools - by owner - sale
Marco Tool Chest, red with multiple drawers. Utica/Bonney Cabinet, wheels, 3 drawers, two doors. Both lock.
madison.craigslist.org
bubinga
Well-known member
The top chest is nice too.MATCO too chest with a Bonney/Utica bottom cabinet with wheels. Wish I was closer I need that botton cabinet.
Tool Chest & Cabnet - tools - by owner - sale
Marco Tool Chest, red with multiple drawers. Utica/Bonney Cabinet, wheels, 3 drawers, two doors. Both lock.madison.craigslist.org
Crabman
Well-known member
Wish one of us was closer, I would like the top!
four.cycle
Well-known member
Danville, Indiana
IRWIN No. DM 13-pc auger set in original wood box with owners manual
Vintage Irwin Auger Bit Set - tools - by owner - sale
Like new set of vintage Irwin tapered square shank auger bits in the original box complete with 1948 manual. 13 bits, 1/4" - 1". One of nicest sets you'll ever find. Like new in all respects. Ready...
indianapolis.craigslist.org
IRWIN No. DM 13-pc auger set in original wood box with owners manual
Attachments
Crabman
Well-known member
Unbelievabable, so beautiful!
four.cycle
Well-known member
you would not believe what I was searching for that led me to that ad.... 
the internetz is so weird some days.
the internetz is so weird some days.
PugetDude
ALLIANCE MEMBER
Do tell.you would not believe what I was searching for that led me to that ad....
the internetz is so weird some days.
Crabman
Well-known member
Old school Dewalt table saw, 1 hour south of Wash DC, looks in decent shape for the vintage.
DeWalt table Saw - $150 (Solomons, MD)
DeWalt table Saw - tools - by owner - sale
Asking $150. All Steel DeWalt table saw. Old school for sure. Needs a little TLC...clean up and repaint if desired. Motor runs great. Comes with fences, blade guard, and about 12 extra blades. If...
smd.craigslist.org
Crabman
Well-known member
Old school Delta Milwaukee lathe $400, hour south of Wash DC Looks in decent shape.
Lathe - tools - by owner - sale
Delta Milwaukee home craft lathe with stand. Comes with lathe tools. Texts only to .
smd.craigslist.org
Crabman
Well-known member
MACHINE SHOP SALE (TOOLS/EQUIPTMENT)
45 minutes south of Wash DC
ONLY SELLING WHAT IS LISTED
-BRIDGEPORT MILL WORKING CONDITION-1,800
-BOAT BOOM LIFT-3000
-INTERNATIONAL BACKHOE (NEEDS ENGINE WORK) 3000
-PERKINS PRIMA MARINE DIESEL ENGINE (TURN KEY RUNNING WITH HARNESS) 6000
-YANMAR 2GM20 MARINE ENGINE TURN KEY-3000
-HEAVY DUTY ENGINE CART-500
-HUGE ROLL OF 5/8 NYLON ROPE FOR INDUSTRIAL USE 1000+FT -2500
CASH ONLY PICK UP ONLY SOLD AS IS,WE HAND FORKLIFTS TO LOAD AND WILL ALWAYS BE UPDATING LISTS.
I know some of you are into the Bridgport mills. It looks BIG.
isb cornbinder
Well-known member
I bought all but one of the RIDGID 400 Series Instrument Benders on Craigslist. I paid retail at NAPA for the 3/16". It was about $100.
The last one I was missing was the 1/2" tube bender. (36132=408) The most I paid on CL was $40.
Covid19 has all but shut down my CL buying.
The last one I was missing was the 1/2" tube bender. (36132=408) The most I paid on CL was $40.
Covid19 has all but shut down my CL buying.
Attachments
FREE- Vintage Craftsmen Drill Press and Scroll Saw (Everett) https://boston.craigslist.org/gbs/zip/d/everett-vintage-craftsmen-drill-press/7427517564.html
firstyearchevelle
Well-known member
S K tool chest in north Jersey. A little beat up. Maybe could be saved.
S-K Mechanics Toolbox - tools - by owner - sale
Vintage S-K Mechanics Toolbox 2 drawers Lift out tote tray on top 22” x 10” x 10”
newjersey.craigslist.org
Cruzan80
Well-known member
That also looks like a machinist lamp in the picture by the base of the drill press. Hard to find as well.
FREE- Vintage Craftsmen Drill Press and Scroll Saw (Everett) https://boston.craigslist.org/gbs/zip/d/everett-vintage-craftsmen-drill-press/7427517564.html
Unsurprisingly, that's already gone!
Mike
cdeer001
Well-known member
$125 Sterling VA. Looks like a nice clean box.
Tool Chest - Craftsmen - tools - by owner - sale
Craftsman tool chest in great condition
washingtondc.craigslist.org
Rivett lathe for $600 on Offer Up in Los Angeles Area.
Check out this item on OfferUp. https://offerup.co/hOACuxGbImb
No details but for $600 it might be worth the risk.
Check out this item on OfferUp. https://offerup.co/hOACuxGbImb
No details but for $600 it might be worth the risk.
tool_scrounge
Well-known member
Location: Oxnard, CA (Ventura County)
Bott storage cabinet. I always thought Bott was similar to Vidmar & Lista $250
44" wide x 30" deep x 40" tall
It looks liek they also added a casters assy to the bottom, which raises it to 47" probably removable if needed.
Bott storage cabinet. I always thought Bott was similar to Vidmar & Lista $250
44" wide x 30" deep x 40" tall
It looks liek they also added a casters assy to the bottom, which raises it to 47" probably removable if needed.
Attachments
Last edited:
Crabman
Well-known member
45 minutes north of Wash DC
American made Kellog-American, 15 CFM, 100 gallon tank, 230 volt single phase, $750.
This looks in decent shape. Older but likely stout unit. I am tempted to go look at it, but the horizontal is not the best for my use, and I do not need a tank swap project.
American made Kellog-American, 15 CFM, 100 gallon tank, 230 volt single phase, $750.
This looks in decent shape. Older but likely stout unit. I am tempted to go look at it, but the horizontal is not the best for my use, and I do not need a tank swap project.
Air Compressor stationary Shop Electric 230 volt 1ph - tools - by...
American made Kellog-American, 15 CFM, 100 gallon tank, 230 volt single phase. Runs nice and quiet! Does NOT come with the red Dolley it is sitting on. Andrew
washingtondc.craigslist.org
isb cornbinder
Well-known member
Those FC White, aka, Fostoria lamps used to be around $10-$20 on eBay. Now these lamps are often well over $100. I am OK. I have 4-5 of them.
bubinga
Well-known member
Wow they're as bad as the Delta retirement lights.
isb cornbinder
Well-known member
This Delta Rockwell two speed band saw came with the Delta bell lamp. I bought this saw from a Craigslist seller. He tried to cheat me by hiding the miter gauge. My daughter demanded that he get the miter gauge because it was shown in the CL advertisement.
I paid way too much for this Delta Rockwell disc/belt grinder ($400). It is is just a little short of being in the like new class. It is 3 phase, Baldor powered.
I paid way too much for this Delta Rockwell disc/belt grinder ($400). It is is just a little short of being in the like new class. It is 3 phase, Baldor powered.
Attachments
Last edited:
catalytic
Well-known member
Cool machinist cabinet in long beach for $120 ---what is it? I like the swing out drawers:
Machinists cabinet - tools - by owner - sale
Old machinists cabinet with locking handle. 310-251-42fivesix
losangeles.craigslist.org
bubinga
Well-known member
NiceCool machinist cabinet in long beach for $120 ---what is it? I like the swing out drawers:
Machinists cabinet - tools - by owner - sale
Old machinists cabinet with locking handle. 310-251-42fivesixlosangeles.craigslist.org
bubinga
Well-known member
i
i'd like to have it too.
firstyearchevelle
Well-known member
bubinga
Well-known member
Real nice
Beach B-27 roller on facebook marketplace in Dingsman Ferry PA 175 or BO... Somebody save it!!!
https://www.facebook.com/marketplac...wse_serp:c33a5f87-0888-45c2-afc9-32cc8720d30a
https://www.facebook.com/marketplac...wse_serp:c33a5f87-0888-45c2-afc9-32cc8720d30a
thewbee
Member
Pretty cool box for you vintage Snap On lovers.
leather handle Snap-on tool box - tools - by owner - sale
old two drawer leather handle snap on tool box in pretty good shape price firm
sanmarcos.craigslist.org
firstyearchevelle
Well-known member
ManUpOrShutUp
Well-known member
bl00
Well-known member
$40 card file cabinet in Owings Md
Vintage Ten Drawer Card File Cabinet - furniture - by owner - sale
This cabinet is grey and originally held card files, but has been used as hobby storage for many years. All the drawers work without issue and it's built like a tank. Dimensions: 52.5" tall, 19"...
smd.craigslist.org
