To avoid these ads, REGISTER NOW!

FS: Indestro, Blue point supreme and SK

Goinlow

Well-known member
Joined
Feb 28, 2010
Messages
260
FS: Plomb Pebble, Blue point supreme and SK!

Here is an SK metal box (I assume meant for 1/4 drive stuff). It comes with no tools just the green SK box. It is in a little worse condition then the indestro one but still a great piece. I'd say $5+ shipping
photo6.jpg


Next piece is a Blue Point Supreme Open end wrench (3/4 and 7/8). It is somewhat rusty but you can either leave it like that or clean it up. Marking says S2428. There is no snap on year marking on it but from the research I did I'd date it to the 40s. $5+ shipping
photo3.jpg

photo4.jpg


I will try to ship everything in the cheapest and safest ways possible. If I can do better then a $5 flat rate box I will try. All prices are OBO

Have 3 new wrenches to add to this topic. All are Plomb.
I will take $8 plus actual shipping for all plomb wrenches.
Plomb 3034 5/8 ad 11/16 open end wrench. Has an owners marking of 3 or M. $5+shipping

Plomb 3426 open end wrench 9/16 and 1/2 no owners markings but is slightly rusty. (This is a very thin wrench) $5+shipping

Plomb 1134 double box end wrench 11/16 and 5/8. (It is the thicker beamed wrench) $5 + shipping
photo1-1.jpg

photop.jpg
 
Last edited:
To avoid these ads, REGISTER NOW!

Bull

Super Moderator
Joined
Dec 12, 2005
Messages
16,189
Location
MA
That BluePoint design looks identical to some New Britain wrenches I have. Is there a relationship?
 
OP
G

Goinlow

Well-known member
Joined
Feb 28, 2010
Messages
260
That BluePoint design looks identical to some New Britain wrenches I have. Is there a relationship?

I noticed the similarity also but I checked a few sites and there were 2 different "styles" of this wrench. 1 is a narrower beam and 1 is wider. This is the wider beam making it older.
 
To avoid these ads, REGISTER NOW!
OP
G

Goinlow

Well-known member
Joined
Feb 28, 2010
Messages
260
I'm not sure it looks like it could fit them but I don't have any here at my house to check. I found it filled with Chinese junk sockets and junked them and cleaned them up.
 
OP
G

Goinlow

Well-known member
Joined
Feb 28, 2010
Messages
260
Updated prices (did some better research to see what they're more realistically worth. I'll take $8 plus shipping for the 3 plomb wrenches and $11 plus shipping for the plomb and blue point wrenches.
 
To avoid these ads, REGISTER NOW!
Top Bottom