JHuston
Well-known member
- Location
- Canton, OH
Hi everyone, I have been cleaning up the shop and have a number of orphan sockets and ratchets that need new homes, including:
(1) Steven Walden , Inc 41-W2615 1/4" drive kit (partial)- has extension/driver with yellow plastic handle, breaker bar,1/4",5/16" and 3/8" eight point drive, 7/32",1/4", and 9/32" six point, and 11/32" and 3/8" twelve point sockets in original case( which is largely corrosion free and still has the military stenciling on the lid). 20.00 + S&H OBO.
(2) Wright 4426 1/2" drive ratchet- low miles ( I got this from Wright to replace an older ratchet, but didn't like it as much, so it didn't get used often). This ratchet is in great shape, save for a spot on the head where it has an abrasion that went through the chrome. 30.00 +S&H.
(3) Blackhawk 34999 3/8" ratchet- this ratchet has some mileage on it, but still works, even though the anvil assembly wiggles a bit in the head. There is a fair amount of corrosion, and I'm not sure what the original finish was, but it appears to never have been plated- maybe a black oxide finish? 10.00 +S&H OBO
(4) Plomb catalog 16-b SOLD- this catalog is 80 pages long, and is in pretty good shape for being the best part of 80 years old. There is a hole punched through the catalog at the top inside corner that may or may not belong there. There are no tears and only minor scuffs. 10.00 +S&H
(5) various Proto sockets- these are all orphans. Includes 6522, 5212-w,1224-h,5210 BS,1218-H, 5212-BS,5432,5016-H,5225,5012-H5206-W, and 1736. The deep well sockets ( 1736,5012 and 5016-H) have been used heavily, but the other sockets look like they'll clean up well. 20.00 +S&H OBO
(6) Blackhawk SOLD 1/2" drive sockets from the 1920's or so - Includes 9/16", 19/32",5/8",13/16",25/32",7/8",15/16",1-1/16"1-1/8",1-1/4" six-point sockets, and 19/32",5/8",11/16",3/4",25/32",7/8",1-1/16" and 1-9/32" four point ( that is, square head) sockets. These sockets are black oxide finish, and some of the smaller sizes are quite worn ( the 11/16" is cracked at the top), but they'd look pretty sharp in an old Blackhawk tool chest just the same. 30.00 +S&H OBO
(7) Bonney AT4 wobble extension- 5.00+S&H
I'm trying to put together a Craftsman "long C" set for my shop, and I'm always on the hunt for old ( pre 1950's) Porter Cable items,so I'm more than happy to trade any of these items if you have something I don't . If you see something you want, and think I'm out of my tree on the price, message me with you offer- I won't be offended.
Thank you,
-James Huston
(1) Steven Walden , Inc 41-W2615 1/4" drive kit (partial)- has extension/driver with yellow plastic handle, breaker bar,1/4",5/16" and 3/8" eight point drive, 7/32",1/4", and 9/32" six point, and 11/32" and 3/8" twelve point sockets in original case( which is largely corrosion free and still has the military stenciling on the lid). 20.00 + S&H OBO.
(2) Wright 4426 1/2" drive ratchet- low miles ( I got this from Wright to replace an older ratchet, but didn't like it as much, so it didn't get used often). This ratchet is in great shape, save for a spot on the head where it has an abrasion that went through the chrome. 30.00 +S&H.
(3) Blackhawk 34999 3/8" ratchet- this ratchet has some mileage on it, but still works, even though the anvil assembly wiggles a bit in the head. There is a fair amount of corrosion, and I'm not sure what the original finish was, but it appears to never have been plated- maybe a black oxide finish? 10.00 +S&H OBO
(4) Plomb catalog 16-b SOLD- this catalog is 80 pages long, and is in pretty good shape for being the best part of 80 years old. There is a hole punched through the catalog at the top inside corner that may or may not belong there. There are no tears and only minor scuffs. 10.00 +S&H
(5) various Proto sockets- these are all orphans. Includes 6522, 5212-w,1224-h,5210 BS,1218-H, 5212-BS,5432,5016-H,5225,5012-H5206-W, and 1736. The deep well sockets ( 1736,5012 and 5016-H) have been used heavily, but the other sockets look like they'll clean up well. 20.00 +S&H OBO
(6) Blackhawk SOLD 1/2" drive sockets from the 1920's or so - Includes 9/16", 19/32",5/8",13/16",25/32",7/8",15/16",1-1/16"1-1/8",1-1/4" six-point sockets, and 19/32",5/8",11/16",3/4",25/32",7/8",1-1/16" and 1-9/32" four point ( that is, square head) sockets. These sockets are black oxide finish, and some of the smaller sizes are quite worn ( the 11/16" is cracked at the top), but they'd look pretty sharp in an old Blackhawk tool chest just the same. 30.00 +S&H OBO
(7) Bonney AT4 wobble extension- 5.00+S&H
I'm trying to put together a Craftsman "long C" set for my shop, and I'm always on the hunt for old ( pre 1950's) Porter Cable items,so I'm more than happy to trade any of these items if you have something I don't . If you see something you want, and think I'm out of my tree on the price, message me with you offer- I won't be offended.
Thank you,
-James Huston
Last edited: