garage door bottom seal

[asalesagent]

last year i bought the rubber seal on the bottom of the door from home depot.
could not slide it through the groves. it must not be the correct one.
can some one tell me where to get the right one thanks

 

[jack bacon]

You can buy everything you need from a garage door company. I buy all my seals, tracks, rollers, etc from Twin City Garage Door here in the Twin Cities

Jack

 

[asalesagent]

You can buy everything you need from a garage door company. I buy all my seals, tracks, rollers, etc from Twin City Garage Door here in the Twin Cities

Jack

Do you have a web site or a number? a am in staten island n.y

 

[jack bacon]

http://www.twincitygaragedoor.com/

you should be able to find someone local to you that will sell parts. Of course, they will install a seal for you on the bottom of your door.

Jack

 

[jack bacon]

One more thing, when I replaced the rubber seals on my door I used soapy water on the seal to get the seal to slide thru the grooves.

Jack

 

[jstroede]

got a picture and/or dimensions of the bottom of the section? What didn't fit on the stuff you bought? If you aren't experienced in doing it, a little "lube" and another set of hands will really help out.

John

 

[NitroSun]

Just bought this last week. It was enough to do two single car doors. Pulled the old ones out, cleaned up a little crud w/ a rag. A touch of CRC and the new ones slid right in. Didn't take more than 20 minutes for both doors.

http://www.amazon.com/dp/B00404RRTE/?tag=atomicindus08-20

 

[asalesagent]

got a picture and/or dimensions of the bottom of the section? What didn't fit on the stuff you bought? If you aren't experienced in doing it, a little "lube" and another set of hands will really help out.

John

i just couldnt get it through the channel. i tried everything. i actullay have a friend that installs garage doors and he just told me its not the correct one.
so i need to find a better place than home depot.