To avoid these ads, REGISTER NOW!

Garage is coming together

ddewey78

Well-known member
Joined
Dec 28, 2013
Messages
97
What started as a simple clean up has spiraled out of control!!

While cleaning up, the floor got ground and epoxieduploadfromtaptalk1448336620004.jpguploadfromtaptalk1448336649326.jpguploadfromtaptalk1448336697548.jpg

uploadfromtaptalk1448336782290.jpg

Then it needed new cabinets and a workbench to look as nice as the floor
uploadfromtaptalk1448336857796.jpg

I couldn't have tires marking up the floor and taking up valuable space, so the tire rack was built, fits over the garage door nicely
uploadfromtaptalk1448336953572.jpg
uploadfromtaptalk1448336975417.jpg



Sent from my XT1254 using Tapatalk
 
To avoid these ads, REGISTER NOW!
OP
D

ddewey78

Well-known member
Joined
Dec 28, 2013
Messages
97
I received a few sample supra tiles to put under the bike lift table, but until I move the lift in I'm using them under the bike standsuploadfromtaptalk1448337476185.jpguploadfromtaptalk1448337499572.jpg

I liked them and have ordered enough to do a 7x14 area.

Got pegboard up for new parts and shelving up for used partsuploadfromtaptalk1448337628913.jpguploadfromtaptalk1448337664599.jpg


Still a work in progress, but its coming along nicely

Sent from my XT1254 using Tapatalk
 

Attachments

  • uploadfromtaptalk1448337739123.jpg
    uploadfromtaptalk1448337739123.jpg
    143.1 KB · Views: 142
  • uploadfromtaptalk1448337761613.jpg
    uploadfromtaptalk1448337761613.jpg
    141.7 KB · Views: 141
To avoid these ads, REGISTER NOW!

k-os

Well-known member
Joined
Dec 29, 2012
Messages
995
Location
WI
Which lift stand is that with the + shaped base. I recognize the H shaped base as the HF stand. I've got the one from HF for my KTM 525 EXC and I'm not trusting it too much. The welded on pivot is already starting to bend.
 
OP
D

ddewey78

Well-known member
Joined
Dec 28, 2013
Messages
97
Which lift stand is that with the + shaped base. I recognize the H shaped base as the HF stand. I've got the one from HF for my KTM 525 EXC and I'm not trusting it too much. The welded on pivot is already starting to bend.
They are actually both cycle gear trackside stands. The H shaped one is one they only carried for a short time, I actually prefer those, and though they do look like the HF stand they are quite a bit stouter. The + shape is just a standard run of the mill cycle gear stand. I also have a MSR aluminum + style stand.

Sent from my XT1254 using Tapatalk
 
To avoid these ads, REGISTER NOW!
Top Bottom