To avoid these ads, REGISTER NOW!

Garage/shop clean out

strength_and_power

Well-known member
Joined
Apr 26, 2015
Messages
1,477
After helping several friends move recently and seeing how much useless stuff they were toting around,I realized I have a lot of stuff I haven't used in years and it needs to go as I will be moving soon and putting things into storage for a bit. Space will be tight and motivation is high just to get it gone. I will post separate replies with each item and edit as they sell. Shipping included on most items and will be either USPS flat rate boxes or UPS depending on item. Local pick up is also possible. North Dallas/ Carrollton area.
Here we go


Sent from my iPhone using Tapatalk
 
Last edited:
To avoid these ads, REGISTER NOW!
OP
S

strength_and_power

Well-known member
Joined
Apr 26, 2015
Messages
1,477
Craftsman nut drivers
Metric 5,6,8,9,10,11 mm
Standard 3/16,1/4,5/16,11/32,3/8,3/8 yes, 2 3/8s.
12 pieces total. $20 with flat rate shipping included.e0de6730dcbacb103624dfaff44a59ad.jpg


Sent from my iPhone using Tapatalk
 

Attachments

  • e0de6730dcbacb103624dfaff44a59ad.jpg
    e0de6730dcbacb103624dfaff44a59ad.jpg
    708.4 KB · Views: 0
To avoid these ads, REGISTER NOW!
OP
S

strength_and_power

Well-known member
Joined
Apr 26, 2015
Messages
1,477
Northern Tool air tool set.
Impact, ratchet, chisel with accessories and case. Basically new, I think I may have used the impact once. I don't have a compressor large enough and don't see myself getting one.
$60 shipped cd81aef7b5c35d3afbe8d2c9b0247088.jpg


Sent from my iPhone using Tapatalk
 

Attachments

  • cd81aef7b5c35d3afbe8d2c9b0247088.jpg
    cd81aef7b5c35d3afbe8d2c9b0247088.jpg
    697.3 KB · Views: 0
OP
S

strength_and_power

Well-known member
Joined
Apr 26, 2015
Messages
1,477
Vice, tubing bender, 8" grinder with stand
36" tall stand. Powder coated. 3" tubing
All items below are mounted on base plates with a 2.5" tube below to allow them to be interchanged with the stand and are powder coated.
Tubing bender- Pittsburgh tools/Harbor Freight. I believe I have all the dies. Only used it a few times, project changed directions and haven't used it since.
Vice- its big, black and holds stuff. Got it at Northern Tools, nothing special but serves its purpose
8" grinder- Northern Tool brand. Motor came loose from saddle and pulled/broke a wire loose from the starter cap. Easy fix just low on priority list.
$150 obo takes it all. Local pick up or if you are within 30-40 minutes of Carrollton I will deliver and bring a rotary hammer to bolt it down. $25 and a beer for delivery.
a2166cd91a7071805956117294af67c0.jpg00da9822c6418b01e7b3c3677d85c64c.jpg


Sent from my iPhone using Tapatalk
 

Attachments

  • a2166cd91a7071805956117294af67c0.jpg
    a2166cd91a7071805956117294af67c0.jpg
    641.4 KB · Views: 0
  • 00da9822c6418b01e7b3c3677d85c64c.jpg
    00da9822c6418b01e7b3c3677d85c64c.jpg
    797.3 KB · Views: 0
To avoid these ads, REGISTER NOW!
Top Bottom