To avoid these ads, REGISTER NOW!

generator problems

joeday

New member
Joined
Dec 9, 2011
Messages
1
my b&s 030324 generator only puts out 4 volts
any help out there please
thanks
 
To avoid these ads, REGISTER NOW!

djd99

Well-known member
Joined
May 4, 2009
Messages
1,006
Location
Owosso,Michigan
I'll sell you a complete 4000watt generator for $150.00 with a briggs as well. not worth fixing yours.
 
To avoid these ads, REGISTER NOW!

nehog

Well-known member
Joined
Jan 2, 2010
Messages
7,935
Location
Jaffrey, NH
First, probably best posted in the electrical section, but...

I'd guess the regulator is bad. Or the head needs re-flashing. You didn't accidentally shut it down with a load on it did you?
 

Snafu

Member
Joined
Dec 2, 2011
Messages
5
I don't think it's an engine problem, unless its not running up to speed. If the engine is running at the proper speed I would guess the problem is on the back end. I assume it must have some kind of voltage regulator on it. I would first see if it had power, sometimes these are fused. The next thing I would do is excite the field with say a 9v battery. After that it's internals on the generator and might not be worth investigating any further. I am sure you can find documentation (manual) online somewhere. Find a tag on the back end (generator not the engine) and see if that company has a a website. Most manufacturers have manuals you can download for free.
 

henrysgarage

Well-known member
Joined
Oct 10, 2010
Messages
254
Location
Carleton Place, ON, Canada
Sorry I cannot offer any help on the gen. We took a course on generators and they stressed that the gen should be run at least every two months and to make sure that a load is put on it while running, do not just let it idle(that is what I used to do). Merry Christmas.
 
To avoid these ads, REGISTER NOW!
Top Bottom