Walkers
Well-known member
I picked up a generator my neighbor left on the curb. I tried not to, left it for 2 days (low traffic road), but ended up throwing it on the truck. It is a Coleman Powermate 5500 watt pull start. Overfilled by at least a half a quart of oil, so I drained and refilled, it took about 3/4 quart. No start with fresh fuel. No spark. I put on a coil and fixed the no spark, but still no start with gas in the cylinder. The vacuum seemed off when pulling, so I pulled off the valve cover. I found one of the rocker arms was off, so I reinstalled it and gave it a little lash. Still low compression, so I looked up a valve lash spec of .04 and went to set the lash and found the exhaust valve about a quarter turn too tight. Reset valve lash and it cranks right up and immediately dies after the priming fuel is gone. Pulled the carb and found what I would call maybe the main jet (little plastic gizmo that goes in the float bowl tube) to be missing. It seems as though this thing was deliberately fucked with in every conceivable way to make it not run. Sadly, I don’t think it was purposely screwed wit, I think someone with good intentions was trying to get it running. I ended up ordering a carb for it for $19 and the coil was $15, so a generator for $34.
