Good source for individual hex wrenches?

[m6z]

Nothing fancy, just the standard L keys, ball end could be a plus.

I'd like to grab a dozen or so of the smaller sizes 1/16", 1/8", 3/16", etc. that wear out/are more likely to break.

 

[RTM]

HJE, they carry other brands too.

Bondhus

Bondhus

www.harryepstein.com

 

[dnschmidt]

Rule of Thumb: If all else fails go with McMaster-Carr. If they don't have it you don't need it. I'd use Epstein first as this is such a common item they certainly should have it.

 

[m6z]

HJE should have been my first thought..

Thanks.

 

[assassin10000]

Kctool is good as well for german/euro tools.

 

[Dave455]

MSC have worked well for me. Good choice of makes - Bondhus, Eklind, Wera, usually a Taiwan option fairly cheap.

I actually did the same thing as the OP a few years back. Bought boxes of 100 in 1/16, 3/32 and 1/8 sizes. Definitely the way to go.

Back then MSC stocked a brand called “Brighton Best”. I bought a lot of their stuff, mainly screws. Very reasonably priced, but the hex keys were excellent quality and made in the U.S. I suspected Eklind were the OEM.

 

[BTL-A4]

+1 on McMaster-Carr.

 

[Wyoming09]

My local hardware/plumbing store has them.