Good Tinted Full Face Shield?

[Farmall 1066]

Seems like whenever I need to use the gas axe, it's always miserable hot and still. I wear glasses and no matter what, goggles always fog up, or I get an eye full of sweat...usually when cutting a bearing race off a shaft, or something requiring precision.
Looking for reccomendations for a good tinted full face shield.

 

[KenS]

Sellstrom DP4

 

[Robby321]

Kinda pricey. Just get a welders darker shield for torching/ Light or dark available

 

[Bansheeboy11]

I bought this with the tinted shield, its by far the best full face ive ever used. Plenty of air flow, comfortable headband and it doesnt fog up

https://www.amazon.com/gp/product/B001VXXUWK/?tag=atomicindus08-20

 

[DanarchyCustoms]

My local welding store has them, bought two sets of head gear, one with a clear polycarb and another with a shaded one. The clear was about 7 dollars and the shaded one was 20 dollars i think. If it makes any difference this store was AGL.

 

[Finky198]

I have a Uvex Turbo shield with a clear lens and a shade 5 lens works great for
cutting, grinding, plasma, oxy/act.... its not cheap but its built better and more comfortable then any others I have tried. I can switch lens in under a minute... I highly recommend them...

This is exactly what I'm running now but they offer all sorts of lens coated/uncoated... clear up to shade 5...

https://www.amazon.com/Honeywell-S9500-Turboshield-Shield-Headgear/dp/B00I4L7GZ4/ref=sr_1_6?ie=UTF8&qid=1474467086&sr=8-6&keywords=uvex+turbo

https://www.amazon.com/Honeywell-S9550-Turboshield-Polycarbonate-Replacement/dp/B00I4L5YBW/ref=pd_day0_469_3?ie=UTF8&psc=1&refRID=1S2X0DT1QZC1WQWYG34X

https://www.amazon.com/Honeywell-S9565-Turboshield-Polycarbonate-Replacement/dp/B00I4L8EXM/ref=sr_1_11?ie=UTF8&qid=1474467130&sr=8-11&keywords=uvex+turboshield

 

[Provincial]

I started using the Jackson shields from the local welding supply over 40 years ago. They are pretty basic and there is no compound curve to the shield. I have never had a problem with them. I use the clear version for grinding and power washing. I use the tinted version for cutting, brazing, and Oxyacetelyne welding.