Grease Gun Couplers

[Kscardsfan]

Is there a master kit or anything to cover all the various fittings and hard to access zerks on cars, trucks, tractors etc. out there? We discovered some on the driveshaft and U-joints on my Dad's old CJ-8 scrambler that were basically inaccessible with the conventional grease gun we had to use.

 

[cvairwerks]

We've got a couple of these kits at work and they seem to cover everything we need:

https://www.toolsid.com/lincoln/grease-gun-accessory-set-mpn-58000.html

 

[four.cycle]

Hi Brian,
I would check out our LNL210.

https://locknlube.com/products/locknlube-quick-connect-greasing-accessory-kit?variant=32954702331988

Thanks,

-Will

 

[scooby074]

Lincoln makes a kit. There are knockoffs of various quality

 

[Hakeem]

Either the straight or the 90deg lock n lube attachment has covered 99% of my greasing needs. The low profile attachment was needed a handful of times. I’d buy the 90deg elbow and the low profile attachment to start rather than spending $100+ on a whole kit.

Consider buying a set of replacement grease fittings and replacing inaccessible fittings with 60deg or 90deg fittings

 

[Rinspeed]

The lock n lube 90° coupler is handy as hell.

 

[tak1313]

+1 for lock n lube. The straight head plus 90 degree adapter (so attaches to the straight head) has done everything I've needed it for, but I probably don't have as many "uses" as some others may have."