Sgt Beavis
Active member
- Joined
- Jan 17, 2012
- Messages
- 42
- Location
- Denton, TX
- Price
- 450
I'm selling my Grizzly G0604X 6" Jointer. It is only a couple of years old and in excellent condition. I have wired it for 110V. The knives have plenty of life left in them and I haven't flipped them yet. Contact me through PMs or at rboyett"AT"gmail"DOT"com
.
From Grizzly.com's website:.
Description
Building on the success of our larger G0490 8" parallelogram jointer, we have created a 6" model with everything you could want. The extra long infeed table and fence makes for straighter cuts while the 1-1/2 HP motor gets the work done quickly. With the built-in adjustment of the parallelogram design, you never need to worry about your tables not being parallel..
SPECIFICATIONS:.
.
Motor: 1-1/2 HP, 110V/220V, single-phase.
Amps: 13.
Precision ground cast iron table.
Table size: 6" x 55-1/2".
Floor to table height: 32-1/2".
Maximum depth of cut: 8".
Rabbeting capacity: 1/2".
Cutterhead diameter: 3".
Cutterhead (G0604 & G0604X): 4-knife, 6" x 5/8" x 1/8".
Cutterhead speed: 4,850 RPM.
Cuts per minute: 19,400.
Power transfer: V-belt drive.
Switch: Push-button with large off paddle for safety.
Fence system: positive stops @±45° & 90°.
Approximate shipping wt: 347 lbs.. .
FEATURES.
Parallelogram table adjustment.
Top mounted switch controls.
Center mounted fence.
4 knife cutterhead.
Built-in mobile base.
4" dust port.
Infeed and outfeed tables have lever control for convenient table height adjustments
. .
$450 Firm
Local Pickup Only - I can help you load it in a truck.
Cash Only - Sorry, no trades
.
From Grizzly.com's website:.
Description
Building on the success of our larger G0490 8" parallelogram jointer, we have created a 6" model with everything you could want. The extra long infeed table and fence makes for straighter cuts while the 1-1/2 HP motor gets the work done quickly. With the built-in adjustment of the parallelogram design, you never need to worry about your tables not being parallel..
SPECIFICATIONS:.
.
Motor: 1-1/2 HP, 110V/220V, single-phase.
Amps: 13.
Precision ground cast iron table.
Table size: 6" x 55-1/2".
Floor to table height: 32-1/2".
Maximum depth of cut: 8".
Rabbeting capacity: 1/2".
Cutterhead diameter: 3".
Cutterhead (G0604 & G0604X): 4-knife, 6" x 5/8" x 1/8".
Cutterhead speed: 4,850 RPM.
Cuts per minute: 19,400.
Power transfer: V-belt drive.
Switch: Push-button with large off paddle for safety.
Fence system: positive stops @±45° & 90°.
Approximate shipping wt: 347 lbs.. .
FEATURES.
Parallelogram table adjustment.
Top mounted switch controls.
Center mounted fence.
4 knife cutterhead.
Built-in mobile base.
4" dust port.
Infeed and outfeed tables have lever control for convenient table height adjustments
. .
$450 Firm
Local Pickup Only - I can help you load it in a truck.
Cash Only - Sorry, no trades