Grizzly Riser block on delta 14" bandsaw

[bubinga]

http://www.grizzly.com/products/Gri...AJSH-XO1zoOXaU51Yg9pmsu8OdkOFYshoCeAYQAvD_BwE
Will it work?
Bandsaw is about a 1966.

Sent from my MotoG3 using Tapatalk

 

[exmaxima1]

Does your Delta have a round upper bearing rod? If so, measure the diameter and see if it matches the Grizzly as the very first step.

 

[bubinga]

Does your Delta have a round upper bearing rod? If so, measure the diameter and see if it matches the Grizzly as the very first step.

No it's hex. But I can get that from a metal supply if it's not too costly.

Sent from my MotoG3 using Tapatalk

 

[bubinga]

Does your Delta have a round upper bearing rod? If so, measure the diameter and see if it matches the Grizzly as the very first step.

http://www.grizzly.com/products/Gri...AJSH-XO1zoOXaU51Yg9pmsu8OdkOFYshoCeAYQAvD_BwE
Will it work?
Bandsaw is about a 1966.

Sent from my MotoG3 using Tapatalk

No it's hex. But I can get that from a metal supply if it's not too costly.

Sent from my MotoG3 using Tapatalk

Thanks To All!
There are 2 of them On E bay,
Wonder what The difference is besides $7.00......L0L
Not a deal Breaker, But A few bucks is a few bucks.....L0L
See attachment
Have been Googling and seems Its Doable, May have to Do A Little "fussing"
Anyone Done the conversion, Did it work Out ok?
Not worried about a 1" blade or nothing like that, 1/2" is Fine.
Just need a little more height For bowl Blanks.

https://www.ebay.com/itm/T25554-Riser-Block-Kit-for-G0555LANV/282930358714

https://www.ebay.com/itm/T25555-Grizzly-Riser-Block-Kit-for-Grizzly-G0555LX-Bandsaw/292216369173

 

[bubinga]

Don't see much If
any difference in the saws?
https://jayscustomcreations.com/2013/09/grizzly-g0555lanv-bandsaw/


http://www.grizzly.com/products/Grizzly-14-Deluxe-Bandsaw/G0555LX