stopdroplol
Well-known member
- Joined
- Jan 8, 2011
- Messages
- 640
Hand Tool Assortment (Now with Channellock)
Accepting Paypal (appreciate gift payments), Money Order, or Local pickup if you live around Orange County. Shipping will be done with USPS First-Class mail for item(s) under 12oz. Heavier items will be put in flat rate envelopes/box. Shipping will be $3.65 for items under 12oz. and $5.30 for items over. Will combine shipping. Priority goes to the first to post in thread or PM me. If you have any questions or would like Higher resolution pictures PM me. If you're interested in multiple items, ask and I may work out a deal with you.
If the item isn't marked sold or pending, and still has picture posted, then it's still for sell.
Brand New/never used Matco SFRTD3TA 88 tooth ratchet set (includes 1/2" CFR108T, 3/8" BFR88T, and 1/4" AFR58T. All stamped USA. Asking $200 shipped
Channellock new in package.
No. 337 - 7" Cutting Pliers (4 available)
No. 317 - 7 1/2" Long Nose Pliers (2 available)
Asking $12 each
Top-to-Bottom.
Used-Bluepoint DXS-1618, 1/2" 9/16" offset box wrench: SOLD
New/Unused condition-Williams 1006 15/16" Superrench: Asking $4SOLD
Used-P&C 2118 1/2" 9/16" offset box wrenchSOLD
New/Unused-Stanley 7 piece 6mm-19mm (no skipped sizes) open end wrench set. Asking: $13SOLD
New/Unused-Wright 3/8" breaker bar 3435, approx 8" long: Asking $8SOLD
A-Bluepoint DCX-1416 7/16" x 1/2" Half Moon wrench. Has owners named engraved. Asking $6
B-Bluepoint J-3236 9/16" x 1/2" Stubby open end wrench. Light pitting and grind marks.Asking $3
C-Bluepoint 15/16" combination wrench. major pitting and corrosion damage along beam, drive ends good. Cleaned in Evapo-rust. Asking $5
D-Williams 11/16" x 19/32" Open end wrench. Light surface rust. Was cleaned with Evapo-rust Asking $2
E-Barcalo-Buffalo-USA- 3/4"x5/8" open end wrench. Some pitting of chrome. was cleaned with Evapo-rust.Asking $2
F-Easco 11/16" combination wrench. Made in USA. Used but good condition.Asking $3
G-Mac 1/2" combination wrench 76/77 date code. Light surface rust. Asking $4
H-Armstrong 9B1496 1 5/8" Service Wrench (thin profile). Used condition. Asking $5SOLD
I-Proto 1220 5/8" combination wrench. Made in Mexico. Lightly used condition. Asking $3SOLD
J-Lectrolite "Tru-Fit" 1/2" combination wrench. Poor condition, pitting of chrome, drive ends good. Asking $2
K-Billings 9/16" combination wrench. USA. Couple grind marks but overall decent condition. was cleaned in evapo-rust Asking $2
L-Plomb 1214 7/16" combination wrench. Used condition. "AR" owner mark. Light pitting. Cleaned with evapo-rust Asking $2SOLD
M-Bonney 2822 11/16" Single offset box end wrench. Date code 1929. Good condition. Asking $5SOLD
N-Drop Forged USA 11/16" x 5/8" deep offset box wrench. surface rust splotches and minor grind marks. Asking $3
O-Williams 25/32" x 11/16" deep offset box wrench. Lightly used condition Asking $4
Top to Bottom
Gedore 30mm x 27mm Open end wrench. Like new condition Asking $15
Gedore 27mm x 24mm Open end wrench. Like new condition Asking $15
WGB 24mm x 22mm Open end wrench. Like new condition Asking $15
Will sell as a set for 35
All of these are Heyco 13mm x 12mm except for the 4th from top which is a Walter 13mm x 12mm. They're all stamped W-Germany and BMW. All are in like new condition.Asking $5 for top one and $3 each rest
Will sell all for $20
Top two are Heyco 19mm x 17mm Bottom is Walter 19mm x 17mm. All are marked W-Germany and BMW and are in like new condition. Asking $7 for top one and $5 each for bottom two Will sell all 3 for $15
Will sell all sell all Gedore, Heyco, and Walter wrenches for $60
Proto 1" 6132 long handle combination wrench. Little dirty but appears to be unused. Has some faint "X" tool marking which appears worse in the picture. No markings on reverse side. Asking $10SOLD
Mayhew punch. Used condition. No markings are damage. Asking $3
Mac 7/16 combination wrench cw14. Has normal wear in open end jaws but mostly in like new condition. Asking $5
Craftsman 1/2" 3/8" 1/4" ratchet set. Don't think the 1/2" was ever used. 3/8" and 1/4" we're only used a couple times. All were taken apart and lubed. No markings, like new. Asking $20SOLD
Craftsman (older) 3/8 quick release. Has "RG" engraved on back of head. Well used. Asking $4SOLD
Craftsman 3/8 RHFT ratchet. Used condition. No marks or damage. Asking $7SOLD
SK fine tooth ratchet (72). Lightly used. Has "#2" engraved on back of head. Asking $12SOLD
P-Mac 3/8" shallow sockets (16,18,19,20,21mm) six points. All are in good shape with only normal wear on square drive end. Socket ends appear untouched with exception of 16mm which has chrome peel on lip of socket. Asking $15SOLD
Q-Bonney 3/8" drive 9,15,16,18,19 mm sockets. 9mm is 6 point rest are 12. None appear used. "C3069" owner mark on all. 9 and 19mm have a little bit of chrome peel on hex lip. Asking $5SOLD
R-Bonney 7/8", 3/4", 11/16". 3/8 drive 12 point. None appear used. Minor chrome peel on lip of hex. Asking $3SOLD
S-Snap-on 3/8" drive. fa5a 5/32 hex bit socket (SB owner mark), fsm121 shallow 12mm 6point socket, fm11 shallow 11mm 12 point socket. Asking $4 each or all 3 for $10
T-Wera torx-27 bit socket. 1/2 drive. Good condition. Asking $4
U-Indestro -super- 9/16" 8-point 1/2" drive. Good condition. Asking $2SOLD
Snap-on 67-b ratcheting adapter 1/2". Used but good condition. Asking $25
Ace/Hanson American made SAE tap and die set. Smallest size is 4-36ns and largest is 1/2"nc. There is two 6-32nc and one doesn't match set (I think it should be 5-40nc). Everything appears to be in good condition, some are lightly used.Asking $50 SOLD
Miscellaneous Craftsman socket lot. This is all stuff I have duplicates of. Most of it is unused or lightly used. Mostly 1/4" stuff. Long extension on left is 3/8" as well as 3 deep sockets on right. Socket above those is 1/2" and 3 1/2" short extensions. Asking $12SOLD
Accepting Paypal (appreciate gift payments), Money Order, or Local pickup if you live around Orange County. Shipping will be done with USPS First-Class mail for item(s) under 12oz. Heavier items will be put in flat rate envelopes/box. Shipping will be $3.65 for items under 12oz. and $5.30 for items over. Will combine shipping. Priority goes to the first to post in thread or PM me. If you have any questions or would like Higher resolution pictures PM me. If you're interested in multiple items, ask and I may work out a deal with you.
If the item isn't marked sold or pending, and still has picture posted, then it's still for sell.
Brand New/never used Matco SFRTD3TA 88 tooth ratchet set (includes 1/2" CFR108T, 3/8" BFR88T, and 1/4" AFR58T. All stamped USA. Asking $200 shipped
Channellock new in package.
No. 337 - 7" Cutting Pliers (4 available)
No. 317 - 7 1/2" Long Nose Pliers (2 available)
Asking $12 each
Top-to-Bottom.
Used-Bluepoint DXS-1618, 1/2" 9/16" offset box wrench: SOLD
New/Unused condition-Williams 1006 15/16" Superrench: Asking $4SOLD
Used-P&C 2118 1/2" 9/16" offset box wrenchSOLD
New/Unused-Stanley 7 piece 6mm-19mm (no skipped sizes) open end wrench set. Asking: $13SOLD
New/Unused-Wright 3/8" breaker bar 3435, approx 8" long: Asking $8SOLD
A-Bluepoint DCX-1416 7/16" x 1/2" Half Moon wrench. Has owners named engraved. Asking $6
B-Bluepoint J-3236 9/16" x 1/2" Stubby open end wrench. Light pitting and grind marks.Asking $3
C-Bluepoint 15/16" combination wrench. major pitting and corrosion damage along beam, drive ends good. Cleaned in Evapo-rust. Asking $5
D-Williams 11/16" x 19/32" Open end wrench. Light surface rust. Was cleaned with Evapo-rust Asking $2
E-Barcalo-Buffalo-USA- 3/4"x5/8" open end wrench. Some pitting of chrome. was cleaned with Evapo-rust.Asking $2
F-Easco 11/16" combination wrench. Made in USA. Used but good condition.Asking $3
G-Mac 1/2" combination wrench 76/77 date code. Light surface rust. Asking $4
H-Armstrong 9B1496 1 5/8" Service Wrench (thin profile). Used condition. Asking $5SOLD
I-Proto 1220 5/8" combination wrench. Made in Mexico. Lightly used condition. Asking $3SOLD
J-Lectrolite "Tru-Fit" 1/2" combination wrench. Poor condition, pitting of chrome, drive ends good. Asking $2
K-Billings 9/16" combination wrench. USA. Couple grind marks but overall decent condition. was cleaned in evapo-rust Asking $2
L-Plomb 1214 7/16" combination wrench. Used condition. "AR" owner mark. Light pitting. Cleaned with evapo-rust Asking $2SOLD
M-Bonney 2822 11/16" Single offset box end wrench. Date code 1929. Good condition. Asking $5SOLD
N-Drop Forged USA 11/16" x 5/8" deep offset box wrench. surface rust splotches and minor grind marks. Asking $3
O-Williams 25/32" x 11/16" deep offset box wrench. Lightly used condition Asking $4
Top to Bottom
Gedore 30mm x 27mm Open end wrench. Like new condition Asking $15
Gedore 27mm x 24mm Open end wrench. Like new condition Asking $15
WGB 24mm x 22mm Open end wrench. Like new condition Asking $15
Will sell as a set for 35
All of these are Heyco 13mm x 12mm except for the 4th from top which is a Walter 13mm x 12mm. They're all stamped W-Germany and BMW. All are in like new condition.Asking $5 for top one and $3 each rest
Will sell all for $20
Top two are Heyco 19mm x 17mm Bottom is Walter 19mm x 17mm. All are marked W-Germany and BMW and are in like new condition. Asking $7 for top one and $5 each for bottom two Will sell all 3 for $15
Will sell all sell all Gedore, Heyco, and Walter wrenches for $60
Proto 1" 6132 long handle combination wrench. Little dirty but appears to be unused. Has some faint "X" tool marking which appears worse in the picture. No markings on reverse side. Asking $10SOLD
Mayhew punch. Used condition. No markings are damage. Asking $3
Mac 7/16 combination wrench cw14. Has normal wear in open end jaws but mostly in like new condition. Asking $5
Craftsman 1/2" 3/8" 1/4" ratchet set. Don't think the 1/2" was ever used. 3/8" and 1/4" we're only used a couple times. All were taken apart and lubed. No markings, like new. Asking $20SOLD
Craftsman (older) 3/8 quick release. Has "RG" engraved on back of head. Well used. Asking $4SOLD
Craftsman 3/8 RHFT ratchet. Used condition. No marks or damage. Asking $7SOLD
SK fine tooth ratchet (72). Lightly used. Has "#2" engraved on back of head. Asking $12SOLD
P-Mac 3/8" shallow sockets (16,18,19,20,21mm) six points. All are in good shape with only normal wear on square drive end. Socket ends appear untouched with exception of 16mm which has chrome peel on lip of socket. Asking $15SOLD
Q-Bonney 3/8" drive 9,15,16,18,19 mm sockets. 9mm is 6 point rest are 12. None appear used. "C3069" owner mark on all. 9 and 19mm have a little bit of chrome peel on hex lip. Asking $5SOLD
R-Bonney 7/8", 3/4", 11/16". 3/8 drive 12 point. None appear used. Minor chrome peel on lip of hex. Asking $3SOLD
S-Snap-on 3/8" drive. fa5a 5/32 hex bit socket (SB owner mark), fsm121 shallow 12mm 6point socket, fm11 shallow 11mm 12 point socket. Asking $4 each or all 3 for $10
T-Wera torx-27 bit socket. 1/2 drive. Good condition. Asking $4
U-Indestro -super- 9/16" 8-point 1/2" drive. Good condition. Asking $2SOLD
Snap-on 67-b ratcheting adapter 1/2". Used but good condition. Asking $25
Ace/Hanson American made SAE tap and die set. Smallest size is 4-36ns and largest is 1/2"nc. There is two 6-32nc and one doesn't match set (I think it should be 5-40nc). Everything appears to be in good condition, some are lightly used.Asking $50 SOLD
Miscellaneous Craftsman socket lot. This is all stuff I have duplicates of. Most of it is unused or lightly used. Mostly 1/4" stuff. Long extension on left is 3/8" as well as 3 deep sockets on right. Socket above those is 1/2" and 3 1/2" short extensions. Asking $12SOLD
Last edited:
