Harbor Freight 13 drawer tool boxes $271.99
- Thread starter Colonial Cobra
- Start date
ramtuff
Well-known member
Does it? I couldn't read it and didn't feel like blowing it up. lol
Farma11
Well-known member
I knew that was too good to be true.
Good luck on that!
fatboyf150
Well-known member
Please go back and read the fine print at the bottem of the coupon. The 25% has the same exclusions as the 20% does.
Dangerman77
Active member
- Joined
- Dec 14, 2010
- Messages
- 35
Got one of these in the garage, pretty sturdy.
OCD has the best of me, SUPER organized hahaha
OCD has the best of me, SUPER organized hahaha
Fatboy is correct: "coupon not valid on any of the following......tool cabinets"
ramtuff
Well-known member
Yes, that was mentioned at the top of the page.
OP
Colonial Cobra
Well-known member
They do still take coupons on the 5 drawer service cart. Would reduce it down to $149.99
SnowBlaZeR2
Well-known member
Really? At my store they said they wouldn't and they even have the new policy posted on the cart in store. Maybe I can talk them into taking it.
mr mike pa
Member
- Joined
- Nov 17, 2010
- Messages
- 12
But what about side cabinets for the roll-away.?????
kgorman
Well-known member
here is mine so far-
I am now thinking of getting one more 7 drawer to complete mine.
Hey just a tip. Storing those aluminum craftsman jacks vertically will lead to them having problems pumping. Try to store and always keep them flat, if yours is already having problems pumping just bleed/fill it and it will be ok. Just saw the jack in the background and thought I would comment.
.Hey just a tip. Storing those aluminum craftsman jacks vertically will lead to them having problems pumping. Try to store and always keep them flat, if yours is already having problems pumping just bleed/fill it and it will be ok. Just saw the jack in the background and thought I would comment.
I agree with kgorman on the sears Jacks exactly the same experiece with a jack stored vertically on a race trailer all fine stored flat.
Paul
I'm guessing no-go, but like anything it's going to depend on the interpretation of the local manager. Maybe they'll agree that's it not technically a cabinet and give you the benefit of the doubt.
Bunk
Well-known member
I asked that question at the store in Pontiac, MI, and they said: No, side boxes are considered tool boxes, no coupons.
Bummer.
Bunk
SnowBlaZeR2
Well-known member
Well, I'm heading out to pick this thing up. I'm throwing it in the back of my Blazer. I'm sure they will help me load it there, but when I get home it's me and my wife. Anyone have any good ideas for unloading it without destroying it?
Boost Creep
Well-known member
i just put a couple boards on the bumper and slid it down. i unloaded it myself that way with no issues
SnowBlaZeR2
Well-known member
Thanks I will give that a go. Does anyone know how tall this is without casters? I'd search, but I'm on my phone right now. Thanks.
Yeah, I did it myself too. It was still crated. slid the back edge out until I could set it on the ground and then walked it out worked fine. If it isn't crated be sure to have some heavy carpet scraps to keep from scratching it up.
Mr Mushman
Well-known member
- Joined
- Jul 7, 2009
- Messages
- 113
Hey SnowBlaZeR2
With casters the work area stands at 39 1/4" and at the "lip" 39 3/4"
Without the casters the work area stands at 33" and at the "lip" 33 1/2". The "lip" is on the 3 sides of the top working area.
In terms of downloading it from your truck, its no big deal, I used a couple of furni pads/moving blankets to slide it off the bed of the truck onto another one on the ground not to scratch it, it all went very smoothly
Good luck and congrats on your new box !!
With casters the work area stands at 39 1/4" and at the "lip" 39 3/4"
Without the casters the work area stands at 33" and at the "lip" 33 1/2". The "lip" is on the 3 sides of the top working area.
In terms of downloading it from your truck, its no big deal, I used a couple of furni pads/moving blankets to slide it off the bed of the truck onto another one on the ground not to scratch it, it all went very smoothly
Good luck and congrats on your new box !!
SnowBlaZeR2
Well-known member
Hey, thanks guys. Just got home with it. Looks great. They had to unpack it and take one of the casters off to fit it in my Blazer, but it's in the drive way.
This is why I love GJ. Instead of telling me to search the answer out, I get productive replies. Thanks again everyone.
This is why I love GJ. Instead of telling me to search the answer out, I get productive replies. Thanks again everyone.
PatDoody
Well-known member
I have one of these and love it, also just got the 7 drawer side cabinet for Christmas from my dad.
News flash tho, harbor freight no longer lets you use the 20%coupons on the tool boxes tho. major bummer.
News flash tho, harbor freight no longer lets you use the 20%coupons on the tool boxes tho. major bummer.
csp
Well-known member
Removing the drawers makes the main case very managable, weight wise.
bmwohio
Well-known member
Awesome, thanks for the insight on this flyer. I have been debating between Craftsman, Kobalt, and HF.....anyone out here have a Kobalt that they like. I am looking at this one, and then to add on later once I get more tools.
http://www.lowes.com/pd_274220-5573..._prd_lis_ord_nbr|0||p_product_quantity_sold|1
GrapeApe
Member
Hey guys,
New here. Looking to pick up this tool box and I see some of you have found it for 350 - did you just negotiate with the manager or is there a coupon? Are these stocked in store of do I order and pick up from a warehouse?
Thank you
New here. Looking to pick up this tool box and I see some of you have found it for 350 - did you just negotiate with the manager or is there a coupon? Are these stocked in store of do I order and pick up from a warehouse?
Thank you
SQ is the SQUAD
Well-known member
new yers day it will be 369.99 they have a million flyers in store with the coupon if you really need it.
on a side note the bigger one is on sale now
http://www.harborfreight.com/56-inch-11-drawer-industrial-roller-cabinet-67681.html
on a side note the bigger one is on sale now
http://www.harborfreight.com/56-inch-11-drawer-industrial-roller-cabinet-67681.html
csp
Well-known member
They got it with a coupon which has now expired. It's well documented in this thread as well as links to find current coupons and future sales flyers.
There's virtually nothing that hasn't been covered regarding these toolboxes in this thread. Yeah I know it's a long thread. Start at the end and work back to the beginning for the most current info.
jmh21586
Well-known member
If you go to Sears.com there is a special:
Craftsman 23 Drawer, 52 in. Combo - Black
$999.00
link:
http://www.sears.com/shc/s/p_10153_12605_009H0029000B?adCell=W8
Craftsman 23 Drawer, 52 in. Combo - Black
$999.00
link:
http://www.sears.com/shc/s/p_10153_12605_009H0029000B?adCell=W8
I have a kobalt box from sams years ago and love it and i just aded the hf side box fits great as well.
Attachments
If you go to Sears.com there is a special:
Craftsman 23 Drawer, 52 in. Combo - Black
$999.00
link:
http://www.sears.com/shc/s/p_10153_12605_009H0029000B?adCell=W8
I have a Craftsman ball bearing box set. The quality is no where near as good as the HF set. I have just purchased the HF model to upgrade.
SQ is the SQUAD
Well-known member
the 349 one expired on the 24th i belive, i know i had it. never seen the 359 one, but the 369 is for new years day
SnowBlaZeR2
Well-known member
I just bought one yesterday with a $349 coupon. I don't remember exactly, but I'm almost certain it didn't expire until April.
R6 Racer
Well-known member
Where did you find it for 349? Please post a link so we can all enjoy it!
Steve
Steve
SnowBlaZeR2
Well-known member
It was in the local Sunday paper a couple weeks ago. I also have a $359 I believe. I'm thinking about getting another one with that when I get my garage cleared out.
SQ is the SQUAD
Well-known member
weill if anyone has a valid 349 coupon please post it up