Harbor Freight Coupon Thread

[fatboyf150]

Expires 12/31/11

http://images.harborfreight.com/hftusa/itc/7841/images/17.jpg

can a non gold club member use this ?

All the coupons are susposed to have Inside Track being put right over the bar code and the store must refuse the coupon with out the card or the customer being at the store where they bought their membership. Next year, all store will be made to check for cards.

 

[gsport]

has anyone got any experience with any of their Badland brand of winches??

 

[Ziggy'sSpeedShop]

Sounds like they're not the same per their web site. Load capacity for the red is 2900# While the black one is only listed at 475#

They are exactly the same box. The load capacity on the website is wrong I think the messed it up with the small black chest. I have two of the black 41inch tops and bottoms with side chest and they are identical to the red ones . The capacity in the owners manual also list it the same weight rating.

 

[drsung]

Anyone know if the 94101 Pipe Threader ever goes on sale? I want to pick one up for my upcoming air line project.

 

[t1r2u3s4t]

I'm looking up and down to no avail for a coupon for the 1/4" torque wrench. Any help? Thanks.

 

[bimmerZ5]

I'm looking up and down to no avail for a coupon for the 1/4" torque wrench. Any help? Thanks.

i no longer have the coupon, but i know the lowest i've seen the 1/4" was $9.99, except that in recent coupons, it's been higher in the $12-$14 range. are you looking for the $9.99 coupon or just any will do?

 

[hoblick]

Looking for the coupon for the 13 drawer roller box.. Best i have so far is $379.. Heard there is a $359.. And also a $271.. Any one got those?

 

[FleaDog]

$99 1 ton shop crane

 

[Soon2AdjustYou]

Looking for the coupon for the 13 drawer roller box.. Best i have so far is $379.. Heard there is a $359.. And also a $271.. Any one got those?

I have a coupon for $350

PM me your email address

 

[gsport]

Looking for the coupon for the 13 drawer roller box.. Best i have so far is $379.. Heard there is a $359.. And also a $271.. Any one got those?

it's going to be on sale for $349, Jan 13, 14, and 15 and no coupon needed

 

[ClwFLGator]

Here is what I get on this link:

403 - Forbidden

me too

I think that clicking on the link directly from this site will not work. Instead, right click on the link, copy it, open a new browser tab, paste the link and hit enter. Then you are not showing a referring (previous) page, and it should fly...

 

[lizardman]

The coupon for the roll away is in the January 2012 Import Tuner, the one with next years calendar in it. Its for $359. I'm not sure the issue by itself minus the calendar has the coupon though. The issue with the calendar is like 17 bucks, not sure if you guys wanna pay that for the coupon though. It also has the 1/2" torque wrench for 9.99, i'm not sure if you guys wants scans of the pages. I can put them up if you guys would like. Looks like i'm getting a free DMM...coupon for that too.

 

[t1r2u3s4t]

i no longer have the coupon, but i know the lowest i've seen the 1/4" was $9.99, except that in recent coupons, it's been higher in the $12-$14 range. are you looking for the $9.99 coupon or just any will do?

$12-14 would be great, thanks!

 

[ksp]

Here are three coupons I have. I just got the 20 ton press yesterday. The other is for the 41" tool chest.

 

[hoblick]

i picked up the 13 drawer roller yesterday, im impressed with the quality..
now im thinking i need to snag the top box for it as well
any coupons for the top box?

 

[Flathead Johnny]

did they mail you those coupons? i'm a HF member and i have not received those yet

Here are three coupons I have. I just got the 20 ton press yesterday. The other is for the 41" tool chest.

 

[Chas 3613]

I got my coupons from a Motor trend magazine (Janurary issue), Went to find Hot Rod magazine and could not locate it so I started looking in other Mags. Sure is worth the price of the magazine. I bought the upper and lower 8 drawer toolbox. This Forum Rocks, every body have a great holiday! Chas

 

[Recoil Rob]

i picked up the 13 drawer roller yesterday, im impressed with the quality..
now im thinking i need to snag the top box for it as well
any coupons for the top box?

Top boxes seem to be scarce, I have been waiting 3 weeks for one to come in to my local store that I have a $249.00 rain check on.

 

[cdb1212]

help i really need a coupon for the 5 drawer cart, can any one please help?

 

[camaro8194]

look online thats i get mine alot of time

 

[DARK AGE 53]

help i really need a coupon for the 5 drawer cart, can any one please help?

In store sale today is $199.99 on the red five drawer service cart, use a 20% off coupon and it comes out to $160...that's cheaper then the super coupons I've seen lately.

 

[chrommagman]

Has any one used the auto drain valve from them ? It's only 9 bucks So I have no clue if it's a POS. I have a 20 gal so I would use it just to bleed off some of the condensation in the air.

link: http://www.harborfreight.com/automatic-compressor-drain-kit-68244.html

 

[CISO1969]

They did not accept the 20% off coupon on my tool box--3 tier box for $149 coupon then I was hoping to get 20% off of that--they shut it down saying they dont apply the 20% coupon to tool boxes and a few other things Darn it!

CISO

 

[hoblick]

i'm looking for a paper original of the 13 drawer toolbox for $350. the coupon is good until april, about the time frame i'll have the money for it. does anyone know where to find this coupon? someone got one they dont need and wanna mail to me?

just print the one out posted above, they will accept it.
all they do is type in the code
i did it saturday at my local harbor freight for the 13 drawer

 

[DARK AGE 53]

They did not accept the 20% off coupon on my tool box--3 tier box for $149 coupon then I was hoping to get 20% off of that--they shut it down saying they dont apply the 20% coupon to tool boxes and a few other things Darn it!

CISO

You can't use the 20% off coupon on tool boxes, the red service cart is not considered a tool box so the 20% off coupon is allowed.

 

[MNRZR]

Has any one used the auto drain valve from them ? It's only 9 bucks So I have no clue if it's a POS. I have a 20 gal so I would use it just to bleed off some of the condensation in the air.

link: http://www.harborfreight.com/automatic-compressor-drain-kit-68244.html

I had the same thought, but after searching a few threads here and elsewhere online, it sounds like it's a POS. YMMV though.

 

[slomatt]

You can't use the 20% off coupon on tool boxes, the red service cart is not considered a tool box so the 20% off coupon is allowed.

This seems to vary from store to store (and probably employee to employee). Last week I tried to use the 20% off coupon on the red service cart at the HF in Concord, CA and was told the coupon could not be used on tool boxes and that the cart was considered a tool box.

- Matt

 

[DARK AGE 53]

This seems to vary from store to store (and probably employee to employee). Last week I tried to use the 20% off coupon on the red service cart at the HF in Concord, CA and was told the coupon could not be used on tool boxes and that the cart was considered a tool box.

- Matt

It's a corp policy that the 20% off coupon can be used on the red service cart, now if you're trying to use another coupon plus the 20% off coupon then that's not allowed......tell them to call corp headquarters if they don't know the policy.

 

[mdbeck1]

I was at the local HF a couple days ago and there was a sign at the cash register that said you had to have the "original" coupon. Xerox copies and printouts from the internet were not accepted.

Has anybody else had that problem lately?

 

[MNRZR]

I was at the local HF a couple days ago and there was a sign at the cash register that said you had to have the "original" coupon. Xerox copies and printouts from the internet were not accepted.

Has anybody else had that problem lately?

I don't understand why they would say that when they email, facebook, twitter, etc., coupons all the time. Those have to be printed out. HF needs to get there **** together.

 

[mdbeck1]

I don't understand why they would say that when they email, facebook, twitter, etc., coupons all the time. Those have to be printed out. HF needs to get there **** together.

The wife was there with me and I didn't get a good look at the sign. I'll go back through in a couple of days and get a better look. ...with a printed free flashlight coupon.

 

[DARK AGE 53]

Just got back from HF, using the 20% coupon I bought the red service cart for $160 + tax.

There's four ways you can buy the service cart, just buy it for the sale price of $199.99 with no coupon, in store flyer that has a super coupon for the cart for $189.99 or do what I did.... buy it at the sale price of $199.99 and use your 20% off coupon = $160 + tax.

 

[olytdi]

Just got back from HF, using the 20% coupon I bought the red service cart for $160 + tax.

There's four ways you can buy the service cart, just buy it for the sale price of $199.99 with no coupon, in store flyer that has a super coupon for the cart for $189.99 or do what I did.... buy it at the sale price of $199.99 and use your 20% off coupon = $160 + tax.

What's the fourth method?

 

[anyheck]

Good to 12-31.

 

[soob]

My local store is now giving out 25% off coupons for New Years day.

 

[olytdi]

where would that be?

 

[ksp]

did they mail you those coupons? i'm a HF member and i have not received those yet

No, just found them at other places and posted them here

 

[DARK AGE 53]

What's the fourth method?

I never said I was good at math , on the other hand you could say reply number 930 is the fourth method. Good find anyheck.

 

[olytdi]

Good to 12-31.

Thanks anyheck! Printed your image and in less than 15 minutes was driving home with the 5 drawer for $149! You rock!

Much appreciated! I may go back and get the 13 drawer this week.

 

[Mgraves235]

Anybody have any coupons for the powder coat system?
I saw a $47 coupon for it at one time, but can't find it now.