Harbor Freight Coupon Thread

[M4A1Carbine]

Photos attached..I hope.

Click here (and then click some more) to see them larger and read some of the fine print.

Thanks for posting that.

Is $399 the best price they've had on the 44" rolling cabinet?


$185 for the 5 drawer cart.

 

[kasander]

Thanks for posting that.

Is $399 the best price they've had on the 44" rolling cabinet?


$185 for the 5 drawer cart.

Yes. $399 is the lowest the 44" goes.

The 5 drawer cart hits $170 occasionally.

 

[M4A1Carbine]

The 5 drawer cart hits $170 occasionally.

Was that before or after the series 2 came out?

 

[kasander]

Was that before or after the series 2 came out?

Did you read the coupon? It says Series 2 at the top...

Also, it just expired in December. Series 2 has been out for much longer than 3 months.

 

[M4A1Carbine]

Did you read the coupon? It says Series 2 at the top...

Also, it just expired in December. Series 2 has been out for much longer than 3 months.

Good point. I remember reading some people had trouble with those coupons, but I think it only covered those colors.

 

[rubber_ducky]

Forgive the noob question here,I have almost zero experience with hazard fraught... can I use their omnipresent 20% off coupon on a sidewalk sale item? Which would put the rolling cabinet at $320?

I assume so, else the parking lot sale price is no better than full price minus the 20% coupon. That said, $320 is giving it away


Sent from my iPhone using Tapatalk

 

[wire]

Forgive the noob question here,I have almost zero experience with hazard fraught... can I use their omnipresent 20% off coupon on a sidewalk sale item? Which would put the rolling cabinet at $320?

I assume so, else the parking lot sale price is no better than full price minus the 20% coupon. That said, $320 is giving it away


Sent from my iPhone using Tapatalk

You can't use a 20% off coupon on a tool cabinet.

 

[fartymarty]

Forgive the noob question here,I have almost zero experience with hazard fraught... can I use their omnipresent 20% off coupon on a sidewalk sale item? Which would put the rolling cabinet at $320?

I assume so, else the parking lot sale price is no better than full price minus the 20% coupon. That said, $320 is giving it away


Sent from my iPhone using Tapatalk

NO. Storage cabinets and parking lot sale items are excluded from the coupon (in the fine print on the coupon) and there is also a restriction printed on the bottom of page one of the Parking lot sale flyer that says: "Percentage off coupons will not be honored with the purchase of products shown in this flyer."

Sorry about the echo, wire just beat me to it.

 

[captain14]

I just opened my Sunday paper inserts and HF has another 30% coupon off items $10 and below
Expires March 1.

Any good ideas to purchase?

Thanks

 

[leftyz]

I just opened my Sunday paper inserts and HF has another 30% coupon off items $10 and below
Expires March 1.

Any good ideas to purchase?

Thanks

There's one going right now too, expires tomorrow, check hfqpdb.com

 

[Motorman55]

Looking for a HF coupon for the large 16" end locker. Haven't seen anything advertised yet.

 

[MrSurly]

ICON Coupon...

Stopped by to get a couple misc items. I had a 20% coupon on my phone, I’m an ITC member, I know the fine print etc, but anyway I asked the new kid at the bouncer if the coupon worked for Icon tools as I hadn’t bothered to squint at it long enough. Well he had to ask the boss lady and she said “no the Icon coupon is all by itself”. I was surprised there was one and asked her how to get one..... hadn’t seen one in my emails, ever. She didn’t know how I could get one, luck of the draw I guess.
After shopping a bit she found me and gave me this number, saying this is the Icon 20% coupon, have the kid type it in.
I was shocked but it actually worked!
I have no idea when it expires or where or in what stores it works.... y’all give it a try, let me know if it works for you!



Sent from my iPhone using Tapatalk

 

[MrSurly]

Looking through this thread, I see this is old news (icon coupon) oh well. I don’t usually follow this thread...


Sent from my iPhone using Tapatalk

 

[z0r]

Looking for a HF coupon for the large 16" end locker. Haven't seen anything advertised yet.

me too. I have this page bookmarked, waiting to get two of them

http://www.hfqpdb.com/best_coupon/US+GENERAL+SERIES+2+END+LOCKER

 

[leftyz]

me too. I have this page bookmarked, waiting to get two of them



http://www.hfqpdb.com/best_coupon/US+GENERAL+SERIES+2+END+LOCKER

I've heard there will be a 199.99 coupon in the April coupon book for it

 

[z0r]

I've heard there will be a 199.99 coupon in the April coupon book for it

thanks, that's good info. I already have the colson performa casters for my planned double rolling locker setup. but I can wait

 

[raco232]

Just picked up my 56" blue top tool chest that has been on order since 11/27/2019. The manager gave me another 15% off for being so patient and customer satisfaction. I couldn't believe it! I never indicated that I need to satisfied or that I was upset. The lady at checkout line did not believe me when I told her that I got a call last Friday that it was in. She looked up account and said that I did not order one. I showed her the line on the computer and said that was the order. The price was $399 and I was told that was not the blue top tool chest and that I did not order one, since the description did not say it was a blue top tool chest and that I did not pay $399 for it. The box is wonderful and I am very satisfied with my purchase! By the way, I do have the lower blue 56" box. Sure beats my old craftsman that iv had for 20yrs.

 

[wachuko]

Photos photos!! Congratulations!

I can’t wait to have my place to start fitting it with matching tool boxes...

 

[Mach5]

Racco232... congratulations. I just picked up a red 44 top. I got the bottom for myself as an early Xmas present using the BF discount. Didn't think I needed the top but it turned out that I did. Like you I had a 20y.o. 28" wide Craftsman box. I loved it but it didn't hold everything anymore. The money I got from selling it mostly paid for the top box. So for around $400 new money I went from 28" - 44" and got more depth. Pic is from yesterday before I put more tools in it. The bottom box has a bunch of magnetic labels.

Sent from my Nexus 5X using Tapatalk

 

[mrvm]

me too. I have this page bookmarked, waiting to get two of them

http://www.hfqpdb.com/best_coupon/US+GENERAL+SERIES+2+END+LOCKER

I know everybody's needs differ but the stand-alone 9-drawer 26" cabinet would hold a lot more for a bit more money. My local HF has yellow-orange-green 26" cabinets marked down for $239

 

[jim faston]

Not a coupon, but that Daytona 3 ton jack will be 177.79 at the 3 day parking lot sale March 13-15. I haven't seen it that low in a while.

https://www.harborfreight.com/3-ton-low-profile-super-duty-rapid-pump-floor-jack-63183.html

 

[z0r]

I know everybody's needs differ but the stand-alone 9-drawer 26" cabinet would hold a lot more for a bit more money. My local HF has yellow-orange-green 26" cabinets marked down for $239

do you mean the 8-drawer 26 inch bottom (red: 64162)? its usable volume is around 10k in^3. the 16 inch end cabinet's usable volume is around 16k in^3

I agree the 16" end locker is a poor value for most uses, I avoided buying them but I'm capitulating now that I have this tool case problem - I need a place to stack odd sized special tool cases, I have a tiny garage and my wall space for shelves is used up. it's really efficient for that since it's basically just a box

I have a 64162 8-drawer and I can only get one thick case (like an otc front end kit) in each of the bottom two drawers, then maybe one thinner case (otc ball joint press?) in the next three drawers. it's kinda sad, I have a bunch of thin drawers sitting empty as it is because I just don't need more thin two-dimensional space for laying out wrenches or whatever. 64162 and its top are an amazing value for this kind of thin 2-d space, I think it's the best value in the store for that

 

[rslaback]

Does anyone have a current coupon for the 1/4" 90 angle air die grinder or the extended reach cut off tools?

 

[spartyon8]

Does anyone have a coupon for a wood lathe? I haven’t found any current ones and Central Machinery is excluded from the 20%off.


Sent from my iPhone using The Garage Journal mobile app

 

[mrvm]

 

[javyLSU]

Parking lot sale this weekend, ITC members get early access as usual:

 

[Probedude]

Ad for HF parking lot sale this weekend is showing the Predator 3500W inverter generator for $679.99. Hasn't been this low in a while.

 

[kasander]

Ad for HF parking lot sale this weekend is showing the Predator 3500W inverter generator for $679.99. Hasn't been this low in a while.

Yep, that's the same price you can get when they have the 15% off with no exclusions coupon.

 

[ATC]

I just picked up the 44" box Friday. I am replacing 2 of the 5-drawer carts with it. I already have the top box (series 1 though), and I want to pick up the side cabinet to consolidate all my Milwaukee M18 stuff into.

 

[getbent4x4]

they pulled the blue nitrile gloves from the website my guess stores have ran out of inventory.

 

[AirJunky]

https://www.harborfreight.com/12v-m...s-xtreme-torque-ratchet-wrench-kit-64196.html

Love mine. It's about a year old. Been thru a complete Jeep engine uninstall, build & reinstall. Plus loads of smaller projects. Still rocks.

 

[protegeV]

they pulled the blue nitrile gloves from the website my guess stores have ran out of inventory.

Local store had 20 boxes this morning from a fresh delivery. Limited to 3 per customer. Saw the first 4 customers with 3 in hand...

 

[timoboy]

Not a coupon, but that Daytona 3 ton jack will be 177.79 at the 3 day parking lot sale March 13-15. I haven't seen it that low in a while.

https://www.harborfreight.com/3-ton-low-profile-super-duty-rapid-pump-floor-jack-63183.html

They had a slightly used one when I went to the parking lot sale under one of the tables asked how much guy said $75 (half tagged price). Couldn’t get it in the car fast enough. Guy at register definitely wanted it. Full warranty too.

 

[getbent4x4]

Local store had 20 boxes this morning from a fresh delivery. Limited to 3 per customer. Saw the first 4 customers with 3 in hand...

I'd get some but I don't want to go in any stores. Lmao

 

[AffableCurmudgeon]

Coupon 96336394

44 inch roller cabinet is $399.
https://www.harborfreight.com/44-in-x-22-In-Double-Bank-Red-Roller-Cabinet-64281.html

 

[Bill Bowman]

^^^^^^Link show $499.00. It was $399.00 last weekends parking lot sale.

 

[XJPat]

^^^^^^Link show $499.00. It was $399.00 last weekends parking lot sale.

I think you missed the coupon part.

Sent from my SCH-I545 using Tapatalk

 

[DwightS]

Sent from my iPhone using Garage Journal

 

[fartymarty]

I think you missed the coupon part.

Sent from my SCH-I545 using Tapatalk

Yeah I believe he did. Anyway, I went to the HF website put the 44" in my cart and applied the coupon# 96336394 and price dropped to $399.99 so it's still valid...just in case anyone wants to stop by there while out shopping for TP.

 

[Certified Drunk]

where's the 60% off Icon tool boxes?