Harbor Freight Coupon Thread
- Thread starter RbrtAWhyt
- Start date
Anyone have a coupon for the tap set? I recall seeing one a while back for $25, I searched the part number in the thread but couldn't find it
http://www.harborfreight.com/60-piece-sae-metric-tap-and-die-set-35407.html
http://www.harborfreight.com/60-piece-sae-metric-tap-and-die-set-35407.html
Andy Griffith
ALLIANCE MEMBER
And the answer is, yes.
AlmostEngineered
Member
I have a rain check for the 44" 13 Drawer Bottom Chest for $319.99! That's $30 less than with the coupon!
If anyone in the Southern California area wants to buy one I will arrange to meet them at the Orange, CA HF. Pay me the cost and I will purchase it with my rain check. I'll even help you load it
The short story is that I went to buy one, they couldn't move enough stuff to get it out of the store room and offered me $30 off of my coupon to come back and get it. I no longer need it and would like to pass the savings on to anyone in my local area.
PM me to setup a time to meet. First come, first served.
If anyone in the Southern California area wants to buy one I will arrange to meet them at the Orange, CA HF. Pay me the cost and I will purchase it with my rain check. I'll even help you load it
The short story is that I went to buy one, they couldn't move enough stuff to get it out of the store room and offered me $30 off of my coupon to come back and get it. I no longer need it and would like to pass the savings on to anyone in my local area.
PM me to setup a time to meet. First come, first served.
I have a rain check for the 44" 13 Drawer Bottom Chest for $319.99! That's $30 less than with the coupon!
If anyone in the Southern California area wants to buy one I will arrange to meet them at the Orange, CA HF. Pay me the cost and I will purchase it with my rain check. I'll even help you load it
The short story is that I went to buy one, they couldn't move enough stuff to get it out of the store room and offered me $30 off of my coupon to come back and get it. I no longer need it and would like to pass the savings on to anyone in my local area.
PM me to setup a time to meet. First come, first served.
PM sent from Orange County! Thanks!
AlmostEngineered
Member
Wangstang
Well-known member
I am looking for a 20 ton hydralic press code if its available.
Thanks
Wes
Thanks
Wes
Here you go!
Attachments
I just tried to buy this today, and the part numbers for the set don't match the coupon. I just checked online too
Buy the Goodyear hose from them. That may be a good retractor reel but the hose didn't look very good on that one..
Wangstang
Well-known member
There's a Coupon for the 20 ton listed on ebay right now that puts the price at $149, so I know it exists...expires in November according to the listings.
Please post it up if you have it.
Thanks
Wes
Cryptic1911
Well-known member
15411067
gsport
Well-known member
you must have a less strict HD... a couple of weeks ago i tried using a HF coupon and they said HF is not a competitor of theirs. they said they would except sears, walmart and a couple of others, but not HF.. i was bummed
Yup the hoses on those reels ****. Just make sure 25' is what you want. I always thought I buy the 25' Goodyear hose over the years until I bought that 25' reel.
I have a 2 car garage & it's just not enough for me to get everywhere comfortably & out in the driveway. Luckily I had the $69 coupon for the 50' reel at the time too. Exchanged it for the 50', installed my Goodyear hose & couldn't be happier.
Thanks Samson! I'm going to pick up one of the rolling stools too. That will come in handy.
I have a portable compressor like this:
and my plan is to make an adapter plate and mount the hose reel off the side of the tank. I think the 25' will be perfect for this.
WhoWhatNow
Well-known member
Does anyone have the $34.99 coupon for the mig welder cart (#90305)? I want to pick one up this weekend.
Thanks!
Thanks!
whileatwork
Member
- Joined
- May 16, 2012
- Messages
- 10
The cart is actually very good. Just don't tighten all the bolts until you have it assembled completely and you'll find it very sturdy.
Attachments
WhoWhatNow
Well-known member
Thanks!
The HD closest to me is hit or miss. Sometimes they will take them, sometimes they wont. But if i drive down to a HD thats about 1 mile away from HF, they take it no questions asked.
And once you do have it completely assembled & tightened down, locktite the **** out of it. Use blue if you want, just something. The fasteners aren't always reliable.
DARK AGE 53
Well-known member
- Joined
- Jan 22, 2005
- Messages
- 1,002
HF has there 36" Metal Brake with Stand on sale for $230, any super coupon with a better price? With a 20% off coupon the price drops to $184. Thanks
Last edited:
rslaback
Well-known member
Here you are.
Attachments
Thanks!!
Soutje1959
New member
- Joined
- Jul 17, 2012
- Messages
- 4
I do have a request to the members over here. I'm new at this forum and sometimes live in Florida but most of the time in Europe. Now, I'm ooking for a super coupon for a harborfreight 12" miter saw. I could find it on Ebay, where it shows a valid date until dec of this year. But it against my principel to buy a coupon. It is not possible to use the shown coupon, because there is no barcode or number on iet. But it is at a very good price thoug.
So does anybody here has one of these super coupons, valid to the end of this year? I'll return to Fl in oct.....
Would be great, if I could find it here, thanks!
So does anybody here has one of these super coupons, valid to the end of this year? I'll return to Fl in oct.....
Would be great, if I could find it here, thanks!
rslaback
Well-known member
Valid through 11/3/12
Attachments
You can buy a much higher quality Ryobi 7.5" miter saw from Amazon.com or E Bay for around $90.00. Unless you just have to have a 10" saw, the Ryobi is a better unit.
Last edited:
Soutje1959
New member
- Joined
- Jul 17, 2012
- Messages
- 4
Hey, this is great guys, thanks for your concerns!
Regards, soutje1959
Regards, soutje1959
sxk122
Well-known member
Soutje, I too will vote go with a more mainbrand saw. I picked up a 10" hitachi before christmas at lowes for about $110. I also looked at a 12" sliding model from either Hitachi or Ryobi for about $150 on sale. I decided against the 12" due to size... for what I use it for the 10" was large enough, the 12" was going to be a pain to keep out of the way
sxk122
Well-known member
Forgot to add, I did look at the HF model too, and at least as far as the store sample it seemed to be 'loose' and I've had hit or miss luck on their power tools
I'd say the same thing.
last time I looked at the Harbor Freight compound miter's, they had all kinds of "movement" in the top half when you wiggled it from side to side.
Now that was a while ago, so maybe they've gotten better, but in their old saws no way you'd get a precision cut.
I ended up with a Craftsman 12" one. I can't say I'm happy with it either. I wish I'd gotten the DeWalt or another brand.
pendragon1998
Well-known member
Is there a particular way you should present these coupons if you print it off the internet and redeem in-store? I wasn't sure how they would respond to a printed coupon if the fine print says "must present original coupon."
Recoil Rob
Well-known member
The only problem I have ever had with a coupon, original or printed, at a HF store was an expired coupon. My store is very customer friendly.
Some stores will even just look at the coupon on your smartphone and key in the number!
pendragon1998
Well-known member
Thanks...I printed off the $159 coupon for the five drawer and they took my crappy print copy (printer ran out of color ink lol) with no questions. Sweet deal!