Harbor Freight Coupon Thread

[Recoil Rob]

Where's the $149 5 Drawer Cart Coupon? Best I've seen is $159.

 

[soob]

They let me do it on the tool cart during the last pre-tent sale thing. Though I too only had a $160 coupon. $144 for it was great. I love that box, more than my chest actually. I just put all my ratchets and sockets in it.

Watch out when you assemble it though. You have to lower the box onto the legs and there are rivets holding the lid hinge that can get stuck between the box and the leg. Of course you can't see them when you're trying to put it together so you're like, why won't it go together. At least that's what happened to me.

 

[DARK AGE 53]

anyone have a coupon for the 1-1/4" to 2" Hitch Adapter? http://www.harborfreight.com/1-1-4-quarter-inch-to-2-inch-hitch-adapter-65023.html

 

[NoSloCoupes]

Just bought the $199 7 drawer end cabinet. Had it in my cart online and found a code "newhft10" (if i remember right) which dropped it to $179. This was a couple weeks ago and i printed it off. Took it in and apparently it was an online only deal, but they price matched it! Plus i had a $10 gift card.

 

[Twiggss]

Just bought the $199 7 drawer end cabinet. Had it in my cart online and found a code "newhft10" (if i remember right) which dropped it to $179. This was a couple weeks ago and i printed it off. Took it in and apparently it was an online only deal, but they price matched it! Plus i had a $10 gift card.

Lucky you..i tried this with the 5 drawer cart a while back and got shot down.

 

[gdavis52]

I had just purchased the 1500# car dollies, the casters arent too awful bad...They are actually pretty decent quality and the locks work - but under a load they are hard to get unlocked. They assemble in 2 minutes
For the price - when they break - I will buy new casters to put on it.

I need a second set, but have been unable to reuse last code. Is it computer specific? Thanks

 

[Bryan83taco]

HF has been out of this puller for at least 2 months now.

http://www.harborfreight.com/46-piece-bolt-puller-set-37824.html

Anybody know where I can get a cheap one like this?

 

[mrbreezeet1]

Not 100% sure, but I would check auto zone.

 

[diggerrick]

Are they out of stock in the store too?

My experience many times has been items on backorder on the website are in stock in the store.

 

[Bryan83taco]

I know parts stores carry them but I really like the HF price! Just moved from NC to FL and there is no HF anywhere near me. Guess I'll just rent one, if they don't come back in stock sometime soon.

 

[Sodder]

Does anyone have a current coupon for the HF top box. I "think" I have seen it for as little as 249. I've looked thought this thread as I know it was posted recently but I can't seem to find it.

I would like to use my ITC to get a additional 10% off during the parking lot sale next weekend.

 

[bhclark]

extra 10% is not good on tool boxes.

 

[mad57]

Ok guys i need to find the coupon for the extended 3in wheel cut off, air powered. there normally $50issh would like to steal it

 

[Viz]

Curious as to what others find to be the "policy" on coupons good on an entire order (not the ones for a single item)......the 10, 15, 20% coupons on flyers that are good on an entire purchase at the store.

On my last trip I went to use the 20% (on a purchase over $100) and the clerk couldn't get it to go through. A supervisor came over, said that was only good on items that weren't already discounted, and of those in my order, they didn't total $100, but she overrode it and put it in anyway for me.

I asked if that means the 10/15/20% coupons (not the newspaper 20% one for a single item) can only be used on "list price" items ? She didn't understand and I rephrased it, finally she said, "yes". So if an item has a red price tag on the shelf (where for example it doesn't say "On sale" but just "Save 33%", it can't be included in the 20% off the overall order ?

The fact that she overrode it and let me have the total discount anyway seems to imply they have a lot of leeway but I'd like to know for sure if that was a one time thing.

Viz

 

[soob]

The 20% off everything coupons wont' work if you try to use another coupon, any coupon--for some reason.

Not being able to use it on "sale" items would make it worthless. You're not the first person who's said this recently, though.

 

[Recoil Rob]

I stopped by the new HF that opened this weekend in Danbury, CT, picked up the 26" top & bottom for $279.

A couple questions. I help off buying some other things because they told me that this Fri., Sat., & Sun they're having a parking lot sale. Are the discounts at these sales really much better than we seem to be doing here with coupons?

Does anyone have a 20% off and entire sale coupon they can post?

Also, looking at the new 5 drawer cart and the Large rolling chest, they now have latched drawers, east to operate and a nice feature.

Finally, is theare a coupon for the set of 4 15" ratcheting tie downs?


thanks,

Rob

 

[MNRZR]

Does anyone have a 20% off and entire sale coupon they can post?

20% Entire purchase of $100 or more HERE

There is also a coupon for the 15' ratchet straps at the bottom of that page.

 

[soob]

You should be able to find a coupon for the straps for $8. Check slickdeals.

 

[Recoil Rob]

You guys are the best!

 

[Cougar67]

BLACK 13 Drawer Tool Cabinet $369.99 on sale through 10-31-11 !!!

I just got the sales flyer today. I thought I'd post it. The lot# is 98084.
I know others were wishing for a black toolbox. It's usual price is $599.99.

http://www.harborfreight.com/13-drawer-black-onyx-industrial-quality-roller-cabinet-98084.html

Edit: The website does not reflect this price. The sale is on page 20 of a flyer they sent me today that says "100 Super Savers" I could not find the deal on line. The flyer does not say whether it's online only or in store only. It does not specify.

 

[Dan in Pasadena]

My 15 year old oil-less 30 gallon compressor finally died. I have a standup sized sandblast cabinet I wanna use AND I don't want another oil-less no matter what. Been searching CL but most big units are 3 phase 220v or too damn expensive.

Considering the regular $899 standing 80 gallon US General HF one for $799 less 20% or $639. what's everyone's opinion? Seems pretty DAMN cheap for what it does and the reviews online (if they're real). At this price its still expensive for me but its new and I know (hope?) it'll be reliable. Home use only, occasional sandblasting, the rest of the time will be pretty tame stuff.

 

[mdbeck1]

My 15 year old oil-less 30 gallon compressor finally died. I have a standup sized sandblast cabinet I wanna use AND I don't want another oil-less no matter what. Been searching CL but most big units are 3 phase 220v or too damn expensive.

Considering the regular $899 standing 80 gallon US General HF one for $799 less 20% or $639. what's everyone's opinion? Seems pretty DAMN cheap for what it does and the reviews online (if they're real). At this price its still expensive for me but its new and I know (hope?) it'll be reliable. Home use only, occasional sandblasting, the rest of the time will be pretty tame stuff.

Keep looking around. SWMBFAO bought me a 220V single phase compressor (5 HP twin stroke) with an 80 gallon tank from Lowes. I think that she paid about $900 + tax

 

[J Persons]

My 15 year old oil-less 30 gallon compressor finally died. I have a standup sized sandblast cabinet I wanna use AND I don't want another oil-less no matter what. Been searching CL but most big units are 3 phase 220v or too damn expensive.

Considering the regular $899 standing 80 gallon US General HF one for $799 less 20% or $639. what's everyone's opinion? Seems pretty DAMN cheap for what it does and the reviews online (if they're real). At this price its still expensive for me but its new and I know (hope?) it'll be reliable. Home use only, occasional sandblasting, the rest of the time will be pretty tame stuff.

You would be better off to buy a 60 gal CF or IR compressor for about the same money from Tractor Supply and others. They are much better compressors and will last a long time. I have a 60 gal CF I bought over 20 years ago, and besides regular oil changes and filter cleanings, the only thing it has ever needed was a new drive belt. It powers a large HF blast cabinet and have also used it to paint using the old style guns. and it never ran out of air. But I don't how if it could keep up with a HVLP gun though.

 

[weadjust]

HF 20% off coupons exclude compressors.

 

[Stargeezer]

Anyone have a $99.00 coupon for HD 5 drawer Tool cart? The one with the open bottom shelf and lid with struts.

It is on sale now for $149.00, down from $199.00. Sales guy tells me some mags have a $99.00 coupon..

Thanks

 

[tabascokid]

Is this the one (it's a 4 drawer) I have 2 and like them.
I had trouble compressing the scan, if this doesn't work let me know.

 

[Stargeezer]

Is this the one (it's a 4 drawer) I have 2 and like them.
I had trouble compressing the scan, if this doesn't work let me know.

Wow. Thanks!

BTW-Anyone needing this to use online: used coupon code: 34132873 (-$50.00)

 

[mrbreezeet1]

Anyone have a $99.00 coupon for HD 5 drawer Tool cart? The one with the open bottom shelf and lid with struts.

It is on sale now for $149.00, down from $199.00. Sales guy tells me some mags have a $99.00 coupon..

Thanks

I don't think the 5 Drawer was ever $99.00.
Get it if they do, that's a deal. That cart wouldn't fit in my car or I'd a had it by now.
I might be bidding out of the garage, hopefully, so I want to hold up for a while.

 

[DARK AGE 53]

Is this the one (it's a 4 drawer) I have 2 and like them.
I had trouble compressing the scan, if this doesn't work let me know.

I printed it out but it's probably not going to work because it's not clear enough.

 

[Stargeezer]

I printed it out but it's probably not going to work because it's not clear enough.

Yes I also found it lo-fi. But!! I used it successfully this afternoon. The coupon would not scan directly and the coupon code is blurry. I just told them what the coupon code was and they entered it into the cash register PC and it worked. It also works on-line using this code: 34132873

I hacked on-line for a while guessing the code until I got it.

use the code " 34132873 "

 

[Stargeezer]

I don't think the 5 Drawer was ever $99.00.
Get it if they do, that's a deal. That cart wouldn't fit in my car or I'd a had it by now.
I might be bidding out of the garage, hopefully, so I want to hold up for a while.

Correct. It is a 4 drawer. But it lists for $230.00 and I snagged it for $99.00 plus tax. So I think it was a super deal. Heavy beast in the box.

I'm going to purchase those HF 10 " castering Pneumatic wheels for it and it will serve as a BBQ cart. Charcoal and wood stored down below. Lighters, thermometers and such in the drawers. Need a place to have all of the racks, foil, pans, cups, basters, tongs and mitts all in one place. Will make a spice rack inside the top bin. Will Velcro a large cutting board to the lid. I need it to be offroad-rated because the BBQ storage shed is 100 yards beyond the garage/patio across dirt and sand. This should be the ticket. Good winter project.

 

[Twiggss]

Correct. It is a 4 drawer. But it lists for $230.00 and I snagged it for $99.00 plus tax. So I think it was a super deal. Heavy beast in the box.

I'm going to purchase those HF 10 " castering Pneumatic wheels for it and it will serve as a BBQ cart. Charcoal and wood stored down below. Lighters, thermometers and such in the drawers. Need a place to have all of the racks, foil, pans, cups, basters, tongs and mitts all in one place. Will make a spice rack inside the top bin. Will Velcro a large cutting board to the lid. I need it to be offroad-rated because the BBQ storage shed is 100 yards beyond the garage/patio across dirt and sand. This should be the ticket. Good winter project.

I actually tried that with the 8" Pneumatic wheels and the damm thing would nearly topple over. Not sure what the deal was with them (crappy design or what) but I put the original ones back on right away.

 

[soob]

http://widgets.harborfreight.com/ws...tml&cust=02002337139&keycode=1004&single=true

The great red 5-drawer cart for $150. Usual coupon price is $160.

ITC coupon, also has the customer number in the bar code. I'm not sure about that. Might be risky to use it if you're not an ITC member. If you are I'd print it out with your own customer # just in case.

 

[mike_s]

Re: 3-Ton Floor Jack

Anyone have a $60 or $50 coupon for the 3-Ton Floor Jack?

see attached, bottom left corner. Print, clip, save.


I tried to do it as PDF also, but for some dumb reason they limit PDF files size to this:
Your file of 178.7 KB bytes exceeds the forum's limit of 146.5 KB for this filetype.


It took it as JPEG, but scaled it down from 800k to 159k on upload. oh well.
I guess file size = bandwidth = money.



EDIT: Cropped down to the ad you wanted, and uploaded it. That way it's a higher print quality to take in the store (and less chance of being hassled).

 

[Recoil Rob]

Re: 3-Ton Floor Jack

Mike,

Do you have a link to the entire page so I can do my own cropping and printing?


thanks,

Rob

see attached, bottom left corner. Print, clip, save.


I tried to do it as PDF also, but for some dumb reason they limit PDF files size to this:
Your file of 178.7 KB bytes exceeds the forum's limit of 146.5 KB for this filetype.


It took it as JPEG, but scaled it down from 800k to 159k on upload. oh well.
I guess file size = bandwidth = money.



EDIT: Cropped down to the ad you wanted, and uploaded it. That way it's a higher print quality to take in the store (and less chance of being hassled).

 

[mike_s]

Re: 3-Ton Floor Jack

Mike,

Do you have a link to the entire page so I can do my own cropping and printing?


thanks,

Rob

wasn't from the web. that's a printed coupon flyer that comes in our local newspaper where all the grocery coupons are in the Sunday paper.

I saw your request the other day and went and found it and scanned it in for you to be of help/assistance.


Here's the entire advertisement/coupon page. click on the link. It's too large to use the IMG tags.

http://i590.photobucket.com/albums/ss343/mikes2000/misc_images/garagejournal/img-X18164912-00012.jpg

 

[Recoil Rob]

Thanks Mike, that worked great! I downloaded it full size and cropped and printed as needed.

 

[nflfreak43]

Re: 3-Ton Floor Jack

wasn't from the web. that's a printed coupon flyer that comes in our local newspaper where all the grocery coupons are in the Sunday paper.

I saw your request the other day and went and found it and scanned it in for you to be of help/assistance.


Here's the entire advertisement/coupon page. click on the link. It's too large to use the IMG tags.

http://i590.photobucket.com/albums/ss343/mikes2000/misc_images/garagejournal/img-X18164912-00012.jpg

THANK YOU!!! i needed that coupon for the 3 gallon compressor 97080 for 39.99.... gonna start airbrushing and its a pretty good one to go with..

 

[mike_s]

new printable flyer came out today. From Harbor Freights Facebook page posting.
with printable coupons, 20% off, free item, etc.

http://www.harborfreight.com/digitalsavings.html

 

[wornoutoldman]

Here is the code for the 13 Drawer US General Roller Cabinet that everybody seems to love for only $349.99 - 97547042 - Good till 2/18/12

Any body have the code for a Motorcycle Lift Table for $299.99?

Appreciate help on this one. Please PM me if you can help.