Harbor Freight Coupon Thread

[upgrading]

I feel kind of dumb for asking this. I found a coupon on here for the welding cart for 34.99. How do I use it can I print it off or do I have to use it online. Sorry for the dumb question.

YMMV.
You should be able to print it and have them scan it at a B&M.
I believe someone reported their HF wouldn't do it, but I think most are OK with it.
I actually just read the code for a free magnetic parts tray to the guy(I asked first) last time I was there and he just typed it in.

 

[crazy5]

I just show them the picture on my phone. Sometimes they'll scan the barcode off the screen, other times they'll key in the numbers. They're pretty laid back.

 

[muidaq]

Any coupons floating around for the 350 Lb. Capacity Large Service Cart With Locking Drawer?

http://www.harborfreight.com/large-steel-tool-cart-with-locking-drawer-90428.html

 

[upgrading]

350LB locking drawer tool cart.
http://www.garagejournal.com/forum/showpost.php?p=3300867&postcount=3862

 

[snowmanii]

anyone buy this?

Yes. I got one when they were couponed for $99. Then about a year later got another one. Lowest coupon Ive seen has been $139 and they had them at the sidewalk sale for that and wouldnt take 25% coupon because of "special event". So cheaper to wait til after sale and use 25% coupon.
It has worked good. I have it hooked up to a huge industrial type battery and run jumper cables over to keep car battery in shed charged. The 2 12 volt cfl bulbs are ok. The 4 amp fuze is fairly rare, so better find some in advance from ebay or something just in case you need one.

 

[muidaq]

Thanks for the cart coupon.

 

[Krypticklown]

I made an account just to show my thanks for this specific thread; I can't seem to find a new coupon for the 49.99 Drill press they used to run in circulars last year. I'd love to pick one up for my misc projects.

 

[wjamyers]

700 lb. Capacity Five Drawer Tool Cart
item#95272
$164.99:
http://www.garagejournal.com/forum/showpost.php?p=3321218&postcount=3893

and
1500 Watt Dual Temperature Heat Gun (572°/1112°)
Drill Master - item#96289

Only $9.99 with coupon 81069755

'til 9/30/13:
http://www.harborfreight.com/digitalsavings.html

I bought the heat gun this past weekend, now I think I'll go back and buy the Cart, LOL

Thanks for the update, upgrading...

 

[upgrading]

The 700LB 5 drawer cart can be had for $164.99
http://www.garagejournal.com/forum/showpost.php?p=3321218&postcount=3893

 

[kyles974]

Thank you!!!
Just went yesterday and bought the shallow well pump. It was $129.00 "on sale" (lol) for $99.00 and I got it for $75.00

I took a pic with my phone and shiwed the lady....and I was surprised it went threw being that pump was "on sale."

Appreciate it!

 

[crazy5]

Usually they will accept a coupon on top of the sale price without any pushback. Trying to use more than one coupon on the same item usually gets turned down. Sometimes if you ask nicely, without any expectation that they do so, you'll get someone who will let you do it.

 

[Breen11]

No HF coupons in my Sunday paper for over a month now.

X2. I havent received any HF coupons from my email or home mail this month.

 

[IlliniBone]

X2. I havent received any HF coupons from my email or home mail this month.

I get 2 emails a week from HF. I think you can change your preferences from their website.

Went yesterday to the SW Denver store, mainly to get the free flashlight and rope and was bummed to see both were already discounted to $1 apiece.

 

[snowmanii]

Heck...free is free no matter how much it was.

 

[TipsyMcStagger]

Just picked up the 2-ton foldable shop crane for $165 ($220 sale price - 25%) using a coupon from this thread. Thanks!

Tomorrow, I'll go back and buy the 2-ton foldable engine stand for $94 with the 25% off coupon.

Tipsy

 

[Detective Coating]

25% off is good until the end of Sept. I've gone in twice this week to get a pot blaster and then a deadman nozzle and has saved me $40 or so by using it. I'll likely go back again to pick up a media tumbler or something I think I "need"

I just tell them the code at checkout, no need to bring in the coupon at mine at least: 11051881 is it

 

[Breen11]

I get 2 emails a week from HF. I think you can change your preferences from their website.

Yeah I got my preferences setup to get receive "Twice a Week Plus any additional Special Email Offers" & no email coupons this month. I even signed up with a alt email address, (2 weeks ago) & I havent received any coupons as well on that address. Nothing in my spam folders.

 

[rslaback]

Anyone have a coupon for the 10" pneumatic tires?

 

[Jagmandave]

Can you use the coupons on Tool boxes?

Answered my own question by calling the store, the fine print says "no"

 

[bestonearound]

Have been watching the ads since June and haven't seen the parts washer dip below 95. Usually it's 70 something on sale. Anyone know of a coupon for it out there currently?

 

[R6 Racer]

How cheep has anyone seen the bead roller go on sale for?

http://www.harborfreight.com/18-inch-sheet-metal-fabrication-kit-34104.html

Thanks
Steve

 

[ChevyEFI]

Have been watching the ads since June and haven't seen the parts washer dip below 95. Usually it's 70 something on sale. Anyone know of a coupon for it out there currently?

25% off 95

 

[ChevyEFI]

And FWIW, I tried pullling up the 20g. parts washer

http://www.harborfreight.com/20-gallon-parts-washer-with-general-purpose-pump-7340.html

and got a 404 not found.

 

[Wangstang]

I can't help but notice the security certificate error that comes up when I go to HF's website. I think I will hold off on ordering tools from them until they get that sorted out.

Wes

 

[erty67]

Have been watching the ads since June and haven't seen the parts washer dip below 95. Usually it's 70 something on sale. Anyone know of a coupon for it out there currently?

$85 right on their coupon page.

http://www.harborfreight.com/extra-savings.html

 

[Wallyman]

Looking for the current deal on the 68050 Rapid Pump 2 ton low profile jack.. I saw a coup somewhere but can't find it now. Anyone? I think it was $109 or $99...

Thanks!!

 

[jd_1138]

Looking for the current deal on the 68050 Rapid Pump 2 ton low profile jack.. I saw a coup somewhere but can't find it now. Anyone? I think it was $109 or $99...

Thanks!!

I clipped out a page of HF coupons out of that Sunday paper magazine (forget the name of it, think Parade? or might have a new name).

There's a coupon for the Rapid Pump 3 ton HD jack for $69.99. The model # is different though -- 68048. Is that the same thing that you want? I can mail you the coupon if you want it. 68050 is a 2 ton jack.

Oh, I see, you want the low profile jack 68050. 68048 is not low profile.

 

[Wallyman]

I clipped out a page of HF coupons out of that Sunday paper magazine (forget the name of it, think Parade? or might have a new name).

There's a coupon for the Rapid Pump 3 ton HD jack for $69.99. The model # is different though -- 68048. Is that the same thing that you want? I can mail you the coupon if you want it. 68050 is a 2 ton jack.

Oh, I see, you want the low profile jack 68050. 68048 is not low profile.

Correct, looking for the low-profile, high lifter (there is on that lifts to 20" I believe, this goes to 23+")

 

[upgrading]

I clipped out a page of HF coupons out of that Sunday paper magazine (forget the name of it, think Parade? or might have a new name).

USA WEEKEND had HF coupons.
Not many though.

 

[erty67]

Correct, looking for the low-profile, high lifter (there is on that lifts to 20" I believe, this goes to 23+")

last day on this one. it's the 2.5. best I have.

 

[TipsyMcStagger]

last day on this one. it's the 2.5. best I have.

There was a pile of 68049's at my HF as recently as a week ago. Now, there are none, and the part number isn't even on the site any longer.

Tipsy

 

[erty67]

weird. maybe a new number is coming

 

[Wallyman]

last day on this one. it's the 2.5. best I have.

That's the shorter 20" one I referenced... Not what I am looking for, sadly. Thanks tho!

 

[erty67]

That's the shorter 20" one I referenced... Not what I am looking for, sadly. Thanks tho!

I see the coupon for the long one occasionally, but not recently. I tried.

 

[Wallyman]

I see the coupon for the long one occasionally, but not recently. I tried.

There is one a few months back, but I swear I just saw it in the last week....somewhere.

Thanks for trying, it is appreciated.

 

[erty67]

$110 coupon on their home page....

http://www.harborfreight.com/extra-savings.html

 

[Wallyman]

Looking for the current deal on the 68050 Rapid Pump 2 ton low profile jack.. I saw a coup somewhere but can't find it now. Anyone? I think it was $109 or $99...

Thanks!!

Ha! Found it! Over on slickdeals page 435, woot! Only 4 days left, tho.. Gotta hurry!!

Thanks all!

 

[Wallyman]

$110 coupon on their home page....

Heh, thanks.. Wonder if that is where I saw it.

 

[fsdogwood]

The HF 26" tool case for $300 (from Cycle world magazine)

 

[upgrading]

The HF 26" tool case for $300 (from Cycle world magazine)

Good find.
That is a real nice price.