Harbor Freight Coupon Thread

[snowbird-vaughn]

Does any one have any 25% coupons expiring this month that they would share please? I already used mine and the store took them.

 

[upgrading]

25% off.

 

[Cryptic1911]

Retractable hose reel.

Just an FYI, don't buy one of these for outside.. the guys at work installed one for an outside air hose for filling up tires, and the rubber got all bleached and dried out from the uv light, and started splitting. I had them put a 50ft flexzilla on the reel to replace it

edit: pic didn't come over, but it's the red rubber hose on the reel

 

[kb1luo]

Brad nailer

 

[soloz2]

Brad nailer

Thanks, but that's the 2 in 1 brad nailer/stapler combo. I'm looking for the straight up brad nailer.

 

[kb1luo]

Thanks, but that's the 2 in 1 brad nailer/stapler combo. I'm looking for the straight up brad nailer.

May have to use a 25% off on a single item coupon for that. I looked through all flyers I have and did not see any coupons for that.

 

[Reit38]

What's been the best price for the 44" bottom box?

 

[k-os]

What's been the best price for the 44" bottom box?

Best I've seen consistently is $359.

 

[Wallyman]

It depends on your local HF store. Had to go there last minute and forgot my printed coupon but i was allowed the coupon as long as i could read them the coupon number(under bar-code).

Ditto - Gal just had me read her the codes. My buddy checked out behind me, used 3 of the same coupons I had, I just read her the numbers again (25%, free screwdrivers with purchase, free light without purchase). Nice when a retailer doesn't make life miserable just because they can. As a result, I keep going back and buy more stuff, go figure!

 

[soloz2]

May have to use a 25% off on a single item coupon for that. I looked through all flyers I have and did not see any coupons for that.

Yeah, that's what I'm thinking.

Sent from my SAMSUNG-SGH-I747 using Tapatalk

 

[zip95864]

Anyone know of a current coupon for the 170 amp mig/flux welder, last one I saw in this thread was for $159 expired sept. I've looked through all my email, mailers, and magazines at work (don't worry I'd buy the magazine just for the coupon) and all I found was for the small 110v welder.

Thanks

Just did a google image search and found one for $169.99----$30 off.

Code 8966301

Worked online. Looks like it expires 1/31/2014.


Sent from my iPhone using Tapatalk

 

[zip95864]

Just did a google image search and found one for $169.99----$30 off.

Code 8966301

Worked online. Looks like it expires 1/31/2014.


Sent from my iPhone using Tapatalk

Sent from my iPhone using Tapatalk

 

[erty67]

That welder is in their coupons right on their website right now.

 

[Marion3]

Welding cart coupon??? Have one saved but it's expired

 

[Wangstang]

Any metal brake coupons/codes out there?

Wes

 

[NoSloCoupes]

$29.99 Welding cart coupon code 94894676...just put it in your cart and print page. Sorry i can't upload pic.

 

[GT PONY 1]

Re: Harbor Freight Coupon Thread - Belt Sander

Does anyone have then code for this coupon ?

 

[erty67]

Welding cart coupon??? Have one saved but it's expired

.......

 

[erty67]

Re: Harbor Freight Coupon Thread - Belt Sander

Does anyone have then code for this coupon ?

sander

 

[SimpleManLance]

Anyone have a 12000lb winch coupon to share. the $299 one? I'm going to get one and put it on my car hauler.

 

[Red89gt]

Went there last night and bought a mini stool for detailing for $19.99 on a coupon and a heat gun. Definitely have to exercise restraint while in there.

 

[ihateminimumwage]

Went there last night and bought a mini stool for detailing for $19.99 on a coupon and a heat gun. Definitely have to exercise restraint while in there.

The stools work great until the casters go out. Then you just take them back and get a new one, and the cycle repeats.

As far as heat guns, I was going to go the HF route, but decided to spend the same and get a USA made gun. I will update how it does, and if/when it dies.
http://www.amazon.com/gp/product/B00004TUCV/?tag=atomicindus08-20

 

[upgrading]

Another week with no good HF coupons in the paper.
Some lame 20% off one in Parade mag today, but no standalone flyer.


12,000 pound winch.

 

[Contract_Pilot]

Thanks again for all the coupons. Anyone have any Dial Caliper or Dial Indicator Coupons?

 

[nippaero]

Hi folks. I am looking for a coupon for a 2" water pump. Do they ever go on sale?

 

[jrod60]

I bought these just for the casters. Used them on angle iron frames for my floor mount sander.

Four of them will hold an early RX7 or fiberglass dune buggy with some distortion. And 1/4 the price of the proper steel car dollies.

 

[bkcorwin]

Any coupons for the red 5 drawer service cart floating around?

 

[jmullen0125]

A couple coupon pages from FLYING magazine attached.

a few notable items (many more not listed):
-25% off one item
-Free multimeter
-90 amp welder 89.99
-13 drawer bottom box 359.99
-1.5 ton alum jack 59.99
-2 HP generator 89.99
-3 gal pancake compressor 39.99
-5 drawer tool cart 164.99
-2" water pump 159.99
-3 pc step drills 7.99
-50 ft hose reel 59.99
-digital calipers 9.99

 

[jmullen0125]

resolution was awful on those two full pages. 5 drawer service cart and the water pump for the guys asking for them. not sure if those are the best prices ever offered for those, but better than full price.

 

[mebe007]

Just joined. Do I can I print out these and use them? Any 56" tool box coupons

 

[jd_1138]

Just joined. Do I can I print out these and use them? Any 56" tool box coupons

Yeah they will take printed coupons.

 

[mebe007]

Oh OK. I really wish I could find the coupons for the 56" box. Anyone have luck with them using tgr 20% off coupons on boxes still?

 

[alinc100]

Some freebies for the New Year.
They should be right at the register.
Get there early though if you want one.
I think they will sell out.
Never seen the light for free before.

Oh OK. I really wish I could find the coupons for the 56" box. Anyone have luck with them using tgr 20% off coupons on boxes still?

This should do it for you.click on the blue arrow to go to that post and print the coupon.

 

[mebe007]

Thanks for that coupon bud. Now if only there was one for the top box

 

[cagullett1]

I know the coupon was just posted for the 44" box, but I am having trouble reading the code. Can someone post a pic with better resolution? Thanks!

 

[Robert Hall]

Is there a coupon for magnetic bars for holding wrenches?

 

[Contract_Pilot]

A couple coupon pages from FLYING magazine attached.

a few notable items (many more not listed):
-25% off one item
-Free multimeter
-90 amp welder 89.99
-13 drawer bottom box 359.99
-1.5 ton alum jack 59.99
-2 HP generator 89.99
-3 gal pancake compressor 39.99
-5 drawer tool cart 164.99
-2" water pump 159.99
-3 pc step drills 7.99
-50 ft hose reel 59.99
-digital calipers 9.99

Have any larger Scans?

 

[jmullen0125]

Have any larger Scans?

I do have a better scan, but have nowhere to host it and garagejournal only lets you post file sizes up to 200kB-ish. Which coupons do you need?

44 in box pic attached. hopefully more legible.

 

[IlliniBone]

You guys should be able to just write the coupon numbers down and use those without having the receipt.

 

[zip95864]

I do have a better scan, but have nowhere to host it and garagejournal only lets you post file sizes up to 200kB-ish. Which coupons do you need?



44 in box pic attached. hopefully more legible.

Www.Tinypic.com


Sent from my iPhone using Tapatalk