To avoid these ads, REGISTER NOW!

Harbor Freight Coupon Thread

FarFire70

Active member
Joined
Nov 24, 2013
Messages
39
I found this one from an ebay auction that for some reason sold for $76... more than the coupon saves, what am i missing?

Sellers make the eBay listings with misleading titles. People think they're getting the actual product. Saw a winch coupon up to over $200. They're backing on quick buyers who don't read the body of the listing.
 
To avoid these ads, REGISTER NOW!

SpeedHoles

Active member
Joined
Mar 2, 2014
Messages
35
Location
Motor City
Originally Posted by af9210 View Post
2T low profile jack part #68050 $109.99 with coupon code 77712611



Why is the 2 ton low profile so much more than the 3 ton low profile?


Not sure if it justifies why the cost is so much higher, but it is quite a bit larger/lower profile and lifts higher. It also has a foot pedal that I don't believe the 3ton has, but I could be wrong....


I just had to drill out and tap the hole to replace the bolt that holds the handle down on my 2-ton lopro; the allen bolt that came with it never fit so good and only bites about 2 threads in the handle to begin with. Would just pop out after a little while and the handle would come off when pulling the jack around (huge PITA). I tapped the outer part and used a bigger bolt and now it seems way more stout.
 

mocars2

Member
Joined
May 8, 2013
Messages
12
SpeedHoles - thanks for the reply.

Nothing worst than pulling out a jack and getting just the handle.
 

macgee

Well-known member
Joined
Jan 11, 2014
Messages
2,834
Location
Sepulveda Pass, CA
Any good coupons for the Item #"94801", 7 Gallon Aluminum Air Tank?

94801.gif
 
Last edited:

BladeExt

Active member
Joined
Apr 3, 2013
Messages
30
Have always use printable coupon. Have anyone ever had problem using just the coupon code without the actually coupons in the store.
 

n8n

Well-known member
Joined
Mar 11, 2014
Messages
3,607
Location
Curtis Bay, MD
Have always use printable coupon. Have anyone ever had problem using just the coupon code without the actually coupons in the store.

Nope. In fact I have just read off codes from here from my phone several times.

Sent from my Nexus 7 using Tapatalk
 

Jasonfi

Well-known member
Joined
Jan 29, 2014
Messages
86
Have always use printable coupon. Have anyone ever had problem using just the coupon code without the actually coupons in the store.

I use just the code all the time. I can't remember the last time I even took a coupon in the store.

Sent from my SCH-I545 using Tapatalk
 

mocars2

Member
Joined
May 8, 2013
Messages
12
I just got a cheap smart phone and I uploaded a bunch of the coupons. Well today I used it at the New Hanover Park ,IL store and I asked the girl did she wanted me to just read the number to her and she said no, I should be able to read it from your phone. So I just handed her my phone with the coupon in the screen.
 

dv8customs

Well-known member
Joined
Dec 29, 2007
Messages
162
Location
East Texas
Anyone have a coupon for the horizontal/vertical band saw? Just wondering if there is anything out there better than the standard 20% coupon.
 

marena

Member
Joined
Mar 11, 2014
Messages
13
Here's a coupon for the 44" - 13 Drawer - I've noticed sometimes a better discount coupon can be found - sometimes better than the monthly sales price...
 

Attachments

  • 07 03 14 Tool Chest 13 Drawer 44in.jpg
    07 03 14 Tool Chest 13 Drawer 44in.jpg
    100.5 KB · Views: 76

marena

Member
Joined
Mar 11, 2014
Messages
13
See what I mean 10 Bucks less though expires earlier
 

Attachments

  • 13 Drawer 05 01 14 for 359.99.jpg
    13 Drawer 05 01 14 for 359.99.jpg
    96.7 KB · Views: 724
To avoid these ads, REGISTER NOW!

dakotart1984

Well-known member
Joined
Jul 31, 2013
Messages
236
Does anybody have the Rolling cart and use it with the CMAN pro pry bars? Im thinking of getting one and itd be nice if those holes inside will fit them..
 

monomach

Well-known member
Joined
Oct 8, 2013
Messages
1,489
Location
Illinois
Great reviews on the fly swatter.

There's a website out there that tells you how to up the power on this thing to make it a lot of fun. Of course, after the mod, you should have somewhere safe to throw it away from you if it happens to short out and start melting in your hands, but...still fun.
 

marena

Member
Joined
Mar 11, 2014
Messages
13
Re: Harbor Freight Thread:One Drawer Cart

Item #90428 / 61161 One Drawer Service Cart Cpn ends 4/7 $59.99
 

Attachments

  • One Drawer Service Cart.JPG
    One Drawer Service Cart.JPG
    37.9 KB · Views: 170

socalmerc

Well-known member
Joined
Mar 28, 2011
Messages
53
Location
riverside, ca
theres a coupon in the truck mag classic trucks that has the mig welder cart for $29 bucks i just picked one up for my new miller 140
 

Dugan

Well-known member
Joined
Sep 30, 2013
Messages
605
Location
New Castle, DE
25% coupon, good for a long time. I keep as an image on my phone and it works fine.
 

Attachments

  • IMG_20140331_181004_478-1.jpg
    IMG_20140331_181004_478-1.jpg
    142.1 KB · Views: 258

g2shuck

Well-known member
Joined
Mar 17, 2014
Messages
51
Do they ever out a coupon for the 20 gallon parts washer that is better than the 25 percent coupon?
 

GCncsuHD

Well-known member
Joined
Aug 19, 2013
Messages
968
Location
Salisbury, NC
Anyone ever see coupons for the 10 Cubic Ft Heavy Duty Trailer Cart Item# 38897
http://www.harborfreight.com/10-cubic-ft-heavy-duty-trailer-cart-38897.html

I tried a 25% off coupon and it does apply, but I figured I would check and see if anyone has a better coupon for it first.

I had to mow our 3ac for the first time yesterday, and was noticing how often I had to stop to move sticks/limbs/dog toys/kid toys etc and carry them off, especially after the storms we have had recently. Thought it would be much handier to just tug this cart along behind the mower and toss them in the cart and unload once I'm done.
 

f575gtc

Well-known member
Joined
Jul 14, 2013
Messages
654
Do they ever out a coupon for the 20 gallon parts washer that is better than the 25 percent coupon?

I just bought mine last week with the 25% coupon right now it is on sale for $99 with 25% it comes out to $75


Last time that item had a coupon was last year for only $70
so its not much cheaper.
 

Mach5

Well-known member
Joined
Apr 30, 2011
Messages
292
Location
Phoenix, AZ
I know the 44" and coupon thing has been beat to death. Right now I have a supercoupon for the 44" box for $369, but I'm wondering if there is a way to get it for even less. E.g., paying for their inside track club to get a discount? I used to be an inside track club member but found that it really didn't make much difference for the frequency I use it, so I didn't renew. I only joined to get a bigger discount on things I happened to be buying at the time.

Anyway, any current inside track club members know if there is sufficient discount to warrant spending to join if you just want the one item?
 

ugotd8

Well-known member
Joined
Apr 15, 2013
Messages
127
Location
Denver
I know the 44" and coupon thing has been beat to death. Right now I have a supercoupon for the 44" box for $369, but I'm wondering if there is a way to get it for even less. E.g., paying for their inside track club to get a discount? I used to be an inside track club member but found that it really didn't make much difference for the frequency I use it, so I didn't renew. I only joined to get a bigger discount on things I happened to be buying at the time.

Anyway, any current inside track club members know if there is sufficient discount to warrant spending to join if you just want the one item?

My experience was buying the 56" the other day. No coupons no nothing. The guy operating the forklift said "did you join inside track when you bought this" ? I had not, he told me to come back the next day and he refunded my purchase, then re-rang it with a 2 year membership, and I even got $7.50 back. :D

So I suppose on a $800 toolbox I would have gotten $50 off or so.
 

ihateminimumwage

Well-known member
Joined
Jan 26, 2012
Messages
3,960
I know the 44" and coupon thing has been beat to death. Right now I have a supercoupon for the 44" box for $369, but I'm wondering if there is a way to get it for even less...

The $359.99 coupon is one page back (Post #5035). That's been the best re-occurring deal as far as coupons go. They do RARELY go on sale for $349.99, but I think that is only on certain holiday weekends. I just bought one with that coupon, and loving the box so far.

My experience was buying the 56" the other day. No coupons no nothing.
So I suppose on a $800 toolbox I would have gotten $50 off or so.
Hold onto your receipt if you paid full price. I'm sure someone on here has a current $699.99 coupon for that box, they usually give you some time to go back in and re-ring it up with a coupon. It'd be worth the trip for $100 savings.:thumbup:

Item #90428 / 61161 One Drawer Service Cart Cpn ends 4/7 $59.99
That is extremely tempting. Been eyeballing one of those carts, but luckily am in no hurry. If they ever do drop down to $49.99 I would grab one immediately.
 
Last edited:

monomach

Well-known member
Joined
Oct 8, 2013
Messages
1,489
Location
Illinois
That is extremely tempting. Been eyeballing one of those carts, but luckily am in no hurry. If they ever do drop down to $49.99 I would grab one immediately.
Right now Lowe's has a cart on sale that's a step up from that. It's more like the black HF one that has coupons for $99.

$71.60 for a few more days. It's in the Lowe's clearance/sale thread.
 

ihateminimumwage

Well-known member
Joined
Jan 26, 2012
Messages
3,960
Right now Lowe's has a cart on sale that's a step up from that. It's more like the black HF one that has coupons for $99.

$71.60 for a few more days. It's in the Lowe's clearance/sale thread.

I have one of the HF 4 drawers (with a shelf and pry bar box on the side. I've just been keeping an eye out for a good deal on a simple 2 shelf roller. The drawer would just be a bonus (or can pull it off if I don't end up needing it)
 

Mach5

Well-known member
Joined
Apr 30, 2011
Messages
292
Location
Phoenix, AZ
I'm pretty sure HF has a two shelf metal roller for about $60. My buddy ended up buying the one drawer on sale for not much more money though. It's a bit bigger, and the drawer gives you an extra place to put things. He uses his as a service cart for car cleaning supplies.

Sent from my SPH-L710 using Tapatalk
 
To avoid these ads, REGISTER NOW!
Top Bottom