To avoid these ads, REGISTER NOW!

Harbor Freight Coupon Thread

To avoid these ads, REGISTER NOW!
B

bucd

Member
Joined
Nov 25, 2014
Messages
7
Big Gus said:
Hi all, does anyone have a coupon for the 2.5 hp, 21 gallon, 125 psi air compressor?

Lot 67847, 61454, 61693
Click to expand...

I just got an email on this one. Not sure how the coupon code works as i've never used it. But it shows the following.

item#67847
Coupon code is 66887192
Brings it to $163.99

I as looking at this one as well.

thanks,

-D
 
S

scsewel1

Member
Joined
Nov 10, 2014
Messages
7
I agree. I bought the membership but it does not make financial cents :) You will do better using the coupons.

XxToolAholicxX said:
I have it and saved $2.00 on the magnetic paper towel hanger the whole year and paid $29.00 for the membership. It is a whole lot cheaper just to use the %25 off coupon and you will come out cheaper. And they asked if I wanted to renew it they charge you sales tax on the membership fee here in California. RIPPOFF save your money and buy some **** from them that you don't need. LOL

----------------------------------------------------------------------------------------------
I am a Toolaholic,Sometimes I regret it,Especially when the Toolman wont give me no credit
Click to expand...
 
7

77Ford

Banned
Joined
May 22, 2014
Messages
973
ctgoodman said:
Yes, I would like to add another evaluation based on square inches of the drawers and the flip up areas of the top boxes. For me it would be a mix of both. Right now I have a Snap-on box that I bought off of craigslist. I find the drawers too shallow. some of my larger screwdrivers rub the bottom of the drawer above it. I can't stack some of my large channel locks that i have two identical without it interfering with another drawer.

Hmmm.. Will if some people would provide me the inside length and width of the drawers for the 26, 44, 56, and 72 I would certainly put that in my analysis and post it. Trying to figure out if i can make that as a Google doc or something so it can be updated and kept current with retail and coupon/sale prices.
Click to expand...

Very interesting...looking forward to your results. Maybe a separate thread :dunno:

I am looking at (2) 46" masterforce boxes at $920 vs. (1) 72" masterforce for $999
 
Last edited:
S

sac02

Well-known member
Joined
May 15, 2011
Messages
446
ctgoodman said:
Hmmm.. Will if some people would provide me the inside length and width of the drawers for the 26, 44, 56, and 72 I would certainly put that in my analysis and post it. Trying to figure out if i can make that as a Google doc or something so it can be updated and kept current with retail and coupon/sale prices.
Click to expand...

Dang, I had those numbers and I trashed them once I made up my mind (they were just on scratch paper, not in excel or anything). :sad:

no joke, I walked into my local HF, grabbed a tape measure off their shelves, and started measuring their tool boxes with their tape measure, lol! Nobody said a word, or even looked at me funny, though.

I like to imagine that I'm not the first person to do that... :lol_hitti
 
C

ctgoodman

Well-known member
Joined
Mar 1, 2010
Messages
315
Location
Salisbury, NC
77Ford said:
Very interesting...looking forward to your results. Maybe a separate thread :dunno:

I am looking at (2) 46" masterforce boxes at $920 vs. (1) 72" masterforce for $999
Click to expand...

Yes, I definately will.

sac02 said:
Dang, I had those numbers and I trashed them once I made up my mind (they were just on scratch paper, not in excel or anything). :sad:

no joke, I walked into my local HF, grabbed a tape measure off their shelves, and started measuring their tool boxes with their tape measure, lol! Nobody said a word, or even looked at me funny, though.

I like to imagine that I'm not the first person to do that... :lol_hitti
Click to expand...

If someone doesn't post them, I'll definitely measure them next time I'm at the store. It's an hour round trip for me so I don't make it down there just to browse around, usually I save up a handful of coupons for stuff I need when I do go.
 
9

92integra

Well-known member
Joined
Jul 11, 2013
Messages
857
thanks unslow1 to bad i was to slowing seeing your reply and missed out on the engine stand for fifty bucks.................

anybody else have a coupon for 1ton cherry picker and the 50 dollar engine stand.
 
C

cdecker

Well-known member
Joined
Oct 28, 2009
Messages
69
Location
Buffalo, NY
Anyone have a coupon for the 93897 50' air/water hose reel for $59? Bought one a while back and looking for a second. All I have is $64 and $69 ones.

Also, anyone have a good $69 or better coupon for the 1/2" earthquake impact wrench (68424/2623)?
 
F

fsdogwood

Well-known member
Joined
Oct 28, 2010
Messages
195
Location
RTP, NC
cdecker said:
Anyone have a coupon for the 93897 50' air/water hose reel for $59? Bought one a while back and looking for a second. All I have is $64 and $69 ones.

Also, anyone have a good $69 or better coupon for the 1/2" earthquake impact wrench (68424/2623)?
Click to expand...

The reel should be $59 on the BF weekend.
 
B

blatterjr

Well-known member
Joined
Nov 21, 2011
Messages
157
cdecker said:
Anyone have a coupon for the 93897 50' air/water hose reel for $59? Bought one a while back and looking for a second. All I have is $64 and $69 ones.

Also, anyone have a good $69 or better coupon for the 1/2" earthquake impact wrench (68424/2623)?
Click to expand...

This one?
 

Attachments

  • sdfsdf.JPG
    sdfsdf.JPG
    67.5 KB · Views: 79
C

cdecker

Well-known member
Joined
Oct 28, 2009
Messages
69
Location
Buffalo, NY
That's the one, thanks blatterjr! I'll stop by and grab one today with that coupon, saves me from going anywhere near that place on Black Friday!
 
To avoid these ads, REGISTER NOW!
U

unslow1

Well-known member
Joined
Mar 3, 2012
Messages
7,879
Location
Illinois
I was just there and they said the Inside Track Club members get all the Black Friday pricing today.
 
M

MN4x4

Well-known member
Joined
Sep 5, 2010
Messages
1,443
Location
Minnesnowta
Looked through the last few pages and didn't see this posted but apologize if it's a repeat. Everybody's favorite

13-drawer 44 inch bottom cabinet is on sale for $349

today through Sunday. Today is for Inside Track club members only, but if you want to beat the crowds and make sure you get one, show up today and ask for the sale price. Some store will just give you the price anyway, while others will give you a discount on the Inside Track membership which would make it worthwhile.

Either way, you win!
 
J

JMToolCo

Well-known member
Joined
Jan 13, 2009
Messages
194
attachment.php


is this as low as this goes?
 
W

wadus

Member
Joined
Nov 25, 2011
Messages
13
Here are a couple of mostly free item coupons good until mid March 2015

changed to PDF for bigger size
 

Attachments

  • free.pdf
    124.3 KB · Views: 261
  • free1.pdf
    115 KB · Views: 181
  • free2.pdf
    118.9 KB · Views: 183
  • free3.pdf
    115.7 KB · Views: 172
Last edited:
X

XxToolAholicxX

Well-known member
Joined
May 28, 2014
Messages
1,449
Location
SF **** Bay Northern California
Jweebothee said:
Can you use coupons in the store if you have a picture of it on your phone?
Click to expand...

Oh yeah absolutely. I have used my phone coupons hundreds of times and different stores no problem. I just read them the numbers and they punch it in and good to go.

----------------------------------------------------------------------------------------


I am a Toolaholic,Sometimes I regret it,Especially when the Toolman wont give me no credit
 
7

77Ford

Banned
Joined
May 22, 2014
Messages
973
wadus said:
Here are a couple of mostly free item coupons good until mid March 2015



changed to PDF for bigger size
Click to expand...


Thanks for posting the awesome coupons....I collecting the mag bars for a project


Sent from my iPad using Tapatalk
 
C

CNGsaves

Well-known member
Joined
Sep 26, 2012
Messages
13,233
Location
KS and OK
Made a stop at HF yesterday and place was hopping busy . . . women, men, kid's, grandma's, etc. everywhere !! I even saw a 60 yr-old woman with cart buying a 110v welder !!

Picked up the 6" free magnetic parts tray and it works, but magnet is not all that strong. Trying out the dual head ratchet (1/4" and 3/8" drive) and do like it.

Thanks all for posting the coupons. :thumbup:
 
F

f575gtc

Well-known member
Joined
Jul 14, 2013
Messages
654
CNGsaves said:
Made a stop at HF yesterday and place was hopping busy . . . women, men, kid's, grandma's, etc. everywhere !! I even saw a 60 yr-old woman with cart buying a 110v welder !!

Picked up the 6" free magnetic parts tray and it works, but magnet is not all that strong. Trying out the dual head ratchet (1/4" and 3/8" drive) and do like it.

Thanks all for posting the coupons. :thumbup:
Click to expand...

I bet you 6 weeks from now that woman will be on here showing off her new custom welded go kart with HF engine :willy_nil
 
Last edited:
C

CNGsaves

Well-known member
Joined
Sep 26, 2012
Messages
13,233
Location
KS and OK
Guessing it might have been present for her husband or someone in family . . . . but never can tell. Maybe she's got wild group of retiree women friends who take their Buick's out drifting in parking lots !! Hit a few no parking signs . . . no problem, whip out a extension cord and HF welder !! :D
 
You must log in or register to reply here.
To avoid these ads, REGISTER NOW!
Top Bottom