Harbor Freight Coupon Thread

ilyes · Jan 16, 2015

I really want the higher box and long work bench from the 72. Plus I need the deep drawer.
Gonna have to order one on Saturday as my box should go to a new owner.

blacknblue · Jan 16, 2015

Patrick5 said:
I successfully used the 20% off any single item coupon yesterday buying the 29 gallon air compressor I was searching for previously in this thread. The cashier knows me by face, as I've been visiting the local HF quite a few times lately for little air tools and fittings, ect. The cashier was cool about the 20% off the compressor after reading the fine print as it did not specifically say it cannot be used on compressors like the typical 20% and 25% off coupons, but of course the bar code didn't work. Since there's no expiration date either, he called his manager up to override it and I thought I'd be home free with a $285 belt driven compressor

The store manager accused me of photo-shopping the fine print and bar code into the coupon and that I cut out the expiration date and exclusions. After showing her the full coupon online was exactly what I brought to her and is exactly the same picture I printed off (which I've also attached to this post), she gave in and let it slide. I made sure to be respectful and remain calm the whole time during her accusations, where blowing up and making a big fuss probably would have closed the door on me right then and there. Use this valuable coupon if you're good at haggling prices and can do so in a respectful manner. It'll probably work. Just stand your ground, have other purchases lined up so they know you're a good customer and just reiterate that this is a coupon HF gave out, and the fine print has no expiration date nor any exclusions. Keep it simple. No expiration date, no exclusions. 20% off. Again, be respectful.

unless I missed it what website was this on?

Nessal · Jan 16, 2015

doan said:
The e-mail coupons today had a "Click here for more coupons"

There's a coupon for the 2 ton Low Profile jack for $130 ($10 less than the store sale price)

That jack is really goo . I had it for the past 4 years and haven't failed me ye . Be aware that it's made for lighter vehicles. All of my cars are extremely low and this gets the job done every time.

T-Mac · Jan 16, 2015

how do the 7mil nitrile gloves go as size-I have small hands and the medical supply med.size fit well.are the hf mediums about the same size?

AceofSpad3s · Jan 16, 2015

Can someone link me a 25% coupon and one for the 18" magnetic tool strip?

larry350 · Jan 16, 2015

I don't think a 25% is out right now. I'd love for someone to prove me wrong!

Sent from my SCH-R530U using Tapatalk

leftyz · Jan 16, 2015

Nope, none currently, as soon as we find one we will post about it, trust me!

dirtrider88 · Jan 17, 2015

Does anybody have this coupon for the 18 gauge brad nailer? I think I saw it in an email this week, but I deleted said email...

http://www.ebay.com/itm/Coupon-to-s...41520524786?pt=US_Coupons&hash=item20f347d5f2

jhama78 · Jan 17, 2015

Are there any coupons out for the welding cabinet?

http://www.harborfreight.com/welding-cabinet-61705.html?hftref=cj

T-Mac · Jan 17, 2015

T-Mac said:
how do the 7mil nitrile gloves go as size-I have small hands and the medical supply med.size fit well.are the hf mediums about the same size?

Anyone?

BG841 · Jan 17, 2015

FWIW I wear large in the 3 or 4 mil as well as the 7 mil gloves. The 7 mil are tighter, but the finger length appears the same (which is a tad longer than I need). I suspect 7 mil mediums will be fine if that is what you wear in the thinner gloves.

nyy845 · Jan 17, 2015

T-Mac said:
Anyone?

Yes, I use med latex at work. Same sizing as the HF med

T-Mac · Jan 17, 2015

Thank you

Dr. D · Jan 17, 2015

dirtrider88 said:
Does anybody have this coupon for the 18 gauge brad nailer? I think I saw it in an email this week, but I deleted said email...

http://www.ebay.com/itm/Coupon-to-s...41520524786?pt=US_Coupons&hash=item20f347d5f2

The code for the $13.99 brad nailer is 87391814.

I just tried and it still works online so it should be good in-store as well.

Sportzmaniak · Jan 17, 2015

leftyz said:
http://www.hfqpdb.com/best_coupon/1_2"+Industrial+Quality+Super+High+Torque+Impact+Wrench

But, as already posted, using the 20% off right now is a much better deal.

Im interested in this deal as well. How is the 20% off a better deal? Right now im trying to use the 20% off and it's reducing the final price to $79.99.

What am I missing?

leftyz · Jan 17, 2015

Sportzmaniak said:
Im interested in this deal as well. How is the 20% off a better deal? Right now im trying to use the 20% off and it's reducing the final price to $79.99.

What am I missing?

It was on sale last week, see the posts here http://www.garagejournal.com/forum/showthread.php?t=85668&page=358

OneAverageDude · Jan 18, 2015

Will HF stores accept a coupon shown on a phone or does it need to be printed out?

gilwest · Jan 18, 2015

Yes they will take ones on a phone. I do it all the time.

mustangsean · Jan 18, 2015

Does anyone have a 2 ton foldable shop crane coupon?

OneAverageDude · Jan 18, 2015

gilwest said:
Yes they will take ones on a phone. I do it all the time.

Thanks!

leftyz · Jan 18, 2015

mustangsean said:
Does anyone have a 2 ton foldable shop crane coupon?

http://www.hfqpdb.com/best_coupon/2+Ton+Foldable+Shop+Crane

60_2_Ton_Foldable_Shop_Crane_1421638384.3423.jpg

mustangsean · Jan 18, 2015

Thanks!

leftyz · Jan 18, 2015

No problem, always check if the 20% coupon will work it may save more if it's on sale

Caparris · Jan 19, 2015

OneAverageDude said:
Thanks!

My store is OK with anything they can type in for the most part. They just ask for the code now and don't even bother looking at it

Except for on jacks..

fuxl · Jan 19, 2015

Anybody happen to have a coupon code for this belt sander?
http://www.harborfreight.com/4-inch-x-36-inch-belt-6-inch-disc-sander-97181.html

leftyz · Jan 19, 2015

fuxl said:
Anybody happen to have a coupon code for this belt sander?
http://www.harborfreight.com/4-inch-x-36-inch-belt-6-inch-disc-sander-97181.html

http://www.hfqpdb.com/best_coupon/4"+x+36"+Belt+And+6"+Disc+Sander

61_4__x_36__Belt_And_6__Disc_Sander_1421693072.3361.jpg

Source: http://images.harborfreight.com/hftweb/monthly_ad/monthly_ad_color.pdf

I did find one that is good until May at http://issuu.com/thesouthern/docs/parade122114 on the back cover, but the quality isnt as good. If you want that one LMK.

leftyz · Jan 19, 2015

I know some people have been looking for these, just happened to find one!

22_6__Magnetic_Parts_Holder_1421693712.2001.jpg

http://www.hfqpdb.com/best_coupon/6"+Magnetic+Parts+Holder

CarsonConcepts · Jan 19, 2015

leftyz said:
I know some people have been looking for these, just happened to find one!

http://www.hfqpdb.com/best_coupon/6"+Magnetic+Parts+Holder

Awesome timing. Was just looking for one this morning as I need to gather several for my second tear down cart build. Thanks

~ Carson

Sabre · Jan 19, 2015

leftyz said:
I know some people have been looking for these, just happened to find one!

http://www.hfqpdb.com/best_coupon/6"+Magnetic+Parts+Holder

Thanks leftyz! :beer:

leftyz · Jan 19, 2015

No problem, just wish I had a closer HF so I could take advantage of these coupons. :-/

fuxl · Jan 19, 2015

leftyz said:
http://www.hfqpdb.com/best_coupon/4"+x+36"+Belt+And+6"+Disc+Sander

Source: http://images.harborfreight.com/hftweb/monthly_ad/monthly_ad_color.pdf

I did find one that is good until May at http://issuu.com/thesouthern/docs/parade122114 on the back cover, but the quality isnt as good. If you want that one LMK.

Cool thanks a lot!
Already got it on order!

Askme42 · Jan 19, 2015

leftyz said:
No problem, just wish I had a closer HF so I could take advantage of these coupons. :-/

I hear you. Almost an hour drive for me.

leftyz · Jan 19, 2015

Same here, 40 miles and it takes a bit over an hour.

MagnumForce · Jan 20, 2015

Same here, 3 all 45 miles from me, seems like I break any tool I buy from them so not worth buying anything. Menards, Sears and Lowe's are all 2 miles from home and those tools don't break on me.

larry350 · Jan 20, 2015

Be careful with that, though... I've been told by guys who notice higher levels of detail than me that some things at HD and Lowes are marked-up versions of what HF sells (tubing cutters specifically come to mind, I don't remember what else was mentioned). I'm sure that only applies to certain things, but still something to keep an eye out for.

leftyz · Jan 20, 2015

Some tools in this ad I haven't seen many coupons for: http://bloximages.chicago2.vip.town...-509c-a1f1-41a5ba081059/54aa2b2e36f17.pdf.pdf

MagnumForce · Jan 20, 2015

The cheap tool shop and performax stuff at Menards is identical to HF

larry350 · Jan 20, 2015

Not necessarily. I had a Tool Shop compressor that's nothing like any of the Chicago Electric ones...

Sent from my SCH-R530U using Tapatalk

Ross/Kzoo · Jan 20, 2015

MagnumForce said:
The cheap tool shop and performax stuff at Menards is identical to HF

I never had better cutting/cutoff wheels than the Tool Shop brand. They don't carry them anymore.

MagnumForce · Jan 20, 2015

All my consumables are supplied

Harbor Freight Coupon Thread

New member

Well-known member

Well-known member

Well-known member

Well-known member

Active member

Well-known member

Member

Active member

Well-known member

Member

Well-known member

Well-known member

Well-known member

Attachments

Member

Well-known member

New member

Active member

Well-known member

New member

Well-known member

Well-known member

Well-known member

Well-known member

Member

Well-known member

Well-known member

Well-known member

Member

Well-known member

Member

Well-known member

Well-known member

Well-known member

Active member

Well-known member

Well-known member

Active member

Well-known member

Well-known member