Does the 44" top ever go on sale? I recently joined ITC, but feel it might be hopeless waiting for the 60gal air comp or 44" top chest to go on sale. The 44" bottom is on sale now at 350 and isnt the greatest savings, but its better than nothing. I was hoping the ITC had better deals
Harbor Freight Coupon Thread
- Thread starter RbrtAWhyt
- Start date
leftyz
Well-known member
Once in a while, yes the 44" top chest will have a coupon. It's not very regular though..
Ruination Fan
Well-known member
Is this the coupon you're looking for?
http://www.hfqpdb.com/coupons/1090_ITEM_44__8_DRAWER_TOP_TOOL_CHEST_1493840458.0372.png
leftyz
Well-known member
Oh yeah, forgot I uploaded it, lol
Sent from my SGH-M919 using Tapatalk
Sent from my SGH-M919 using Tapatalk
leftyz
Well-known member
Came from June issue of motor trend
Sent from my SGH-M919 using Tapatalk
Sent from my SGH-M919 using Tapatalk
leftyz
Well-known member
So, I guess I'm not special, I didn't get a flyer again
DFB
Well-known member
So do my old eyes deceive me or are there no freebie coupons in the new catalog I just got in the mail yesterday? 
BTW its the ITC edition I get
BTW its the ITC edition I get
So, I guess I'm not special, I didn't get a flyer again
Don't feel bad, I haven't mine either
leftyz
Well-known member
Actually mine came in today, its "Pallet Clearance" with no percent offs or freebies
Are there any coupons on either tool cart to get it less than $159? The Black one for $100 would suit my needs just fine if it's available, but if I can get he red one less than $150, I'll go that route.
Edit: tool cart, not service cart
Edit: tool cart, not service cart
XJPat
Well-known member
They should just list what you CAN buy on those. The list would be much shorter.
If I could give rep points, you'd get $99.99 of them.
leftyz
Well-known member
Going to upload all of these but it's going to take a while. I tested one and they are active already.
JULY 2017 ITC
JULY 2017 ITC
leftyz
Well-known member
All are snipped and uploaded...
edit: all done!
edit: all done!
Last edited:
a52-830
Well-known member
ya know, if they want me to join the ITC, it is easy:
forget all the coupons. when they enter my ITC number, i automatically get the best price that they currently have, not matter what is in my cart, and no matter where the coupon was published. sometimes, i have seen regular coupons for less than the ITC price, assuming, of course, that there isn't a more recent ITC coupon.
i know some people like this whole chasing coupon thing, but not me. lefty does a great job and all, and i appreciate it, and use his coupons, but the ITC is me paying them so i can invest more work into getting them to give me the best deal possible.
the ITC membership is worthless unless i carry around more coupons.
anyway, that is where i stand on this, because i know you were all wondering
forget all the coupons. when they enter my ITC number, i automatically get the best price that they currently have, not matter what is in my cart, and no matter where the coupon was published. sometimes, i have seen regular coupons for less than the ITC price, assuming, of course, that there isn't a more recent ITC coupon.
i know some people like this whole chasing coupon thing, but not me. lefty does a great job and all, and i appreciate it, and use his coupons, but the ITC is me paying them so i can invest more work into getting them to give me the best deal possible.
the ITC membership is worthless unless i carry around more coupons.
anyway, that is where i stand on this, because i know you were all wondering
bubinga
Well-known member
Better off with the Red one IMO more space not needed (but maybe needed later)
Is better than just enough space( but no extra if needed)
Is better than just enough space( but no extra if needed)
DFB
Well-known member
Can anyone link me up to any torque wrench coupons
Thinking $9.99 was best price
Also looking for Pittsburgh pro 20pc 3/8 socket set in case $14.99 maybe
plus 1/2 drive shallow impact set for $9.99
and 53 pc Pittsburgh Metric/Sae Tool kit...also $9.99 best price
Thks in advance
0h 18 ga stapler/nailer combo too...looking for around a $15 price for that
Thinking $9.99 was best price
Also looking for Pittsburgh pro 20pc 3/8 socket set in case $14.99 maybe
plus 1/2 drive shallow impact set for $9.99
and 53 pc Pittsburgh Metric/Sae Tool kit...also $9.99 best price
Thks in advance
0h 18 ga stapler/nailer combo too...looking for around a $15 price for that
Last edited:
Sychotix57
Well-known member
Any body got any coupons for the 44in toolbox? I can't happen to find any in my emails. i wanna buy 2 of them tomorrow.
Sent from my Pixel XL using Tapatalk
Sent from my Pixel XL using Tapatalk
leftyz
Well-known member
DFB
Well-known member
Sychotix57
Well-known member
getbent4x4
Well-known member
- Joined
- Oct 7, 2012
- Messages
- 3,722
Not sure other than the database. I would suggest just getting all Pro series chromoly impact sockets. same quality as tool truck
Just a FYI these allen chromoly impact sockets coupon is cheaper than the 25% coupon. I'll be getting a set tomorrow. Big thanks to Leftyz!!
http://www.hfqpdb.com/coupons/921_ITC_8_PIECE_1_2__DRIVE_IMPACT_HEX_SOCKET_SETS_1498842281.9529.png
DFB
Well-known member
Oh I agree the Pittsburg Pro shallow impact sockets are a definitely a nicer set but in my situation cheaper cost is better option for what I am doing.
Also just an FYI that is an Inside Track coupon and one has to to have an ITC membership to use it and get that lower price (which I do)
-----------------------------------------------------------------------
So I did my store run yesterday and this is the second time a checkout clerk commented that my receipt was the longest one they had seen
The manager come over because he wanted see just what the coupon discounts totaled up to...it was $160 off.
But its actually going to be bit more because after I got home and double checked my receipt I found I missed a couple of coupons for $5 off on two items (angle grinder/ hole saws) plus the one for 25% off any sawblade I (had a 10"40T and got wacked full price there too) and I also I am going to see if I can get 20% off a 3rd item that was also full price. (10pk 4-1/2 grinding wheels) I don't seem to find a coupon on them like the on 4 1/2 cutting discs
I did use the 4TH of July 25% off in the that original purchase so does anybody know if I can get to use that second but different percentage off coupon too?
Probably not hey
Budman01
Well-known member
leftyz
Well-known member
http://www.hfqpdb.com/best_coupon/3+TON+DAYTONA+PROFESSIONAL+STEEL+FLOOR+JACK+-+SUPER+DUTY
$179.99, so $20 off... It's been pretty common since they released it!
leftyz
Well-known member
First coupon I've seen for the BIG welding cart!
http://www.hfqpdb.com/best_coupon/COMMERCIAL+QUALITY+HEAVY+DUTY+WELDING+CABINET
EDIT: It's an ITC coupon, $40 off though...
http://www.hfqpdb.com/best_coupon/COMMERCIAL+QUALITY+HEAVY+DUTY+WELDING+CABINET
EDIT: It's an ITC coupon, $40 off though...
Last edited:
getbent4x4
Well-known member
- Joined
- Oct 7, 2012
- Messages
- 3,722
The ITC coupon for the hex bits worked for me without a membership. Just had to have them scan the item, type in the code. Remove the item, rescan the item. Then the discount appeared.
DFB
Well-known member
I think its been mentioned here before is that most often an ITC discount is usually within pennies difference of using the standard 20% off coupon. The bigger factor being the ITC coupon will allow for multiple purchases (whatever the stated limit may be) with that discount price vs just one item as stated on a 20% off coupon code.
My store is pretty new and most of the help just checks you out though a few offer up a coupon or two if you don't have one (and ask)
Though I have often wondered just what an unscrupulous checkout cashier could do
Anybody know anything about wholesale accounts with HF?
I ask every time I go in usually I don't get any answers but this time a clerk told me they can get them but its difficult.
My store is pretty new and most of the help just checks you out though a few offer up a coupon or two if you don't have one (and ask)
Though I have often wondered just what an unscrupulous checkout cashier could do
Anybody know anything about wholesale accounts with HF?
I ask every time I go in usually I don't get any answers but this time a clerk told me they can get them but its difficult.
Of course. Just bit the bullet and bought it last week. Initial impressions - good if you turn the welders towards the handle. The way they display it doesn't give you room to open the door. Have my Mig and my plasma on it. Like it so far, and have enough room for my future tig (once I get one!)
Ditch
Banned
Is the ITC really worthwhile?
Acuratechva
Well-known member
Anybody know if 20 or 25off can be used with a Scaffold or a torch?
I anticipate them claiming its welding which it clearly isnt.
I anticipate them claiming its welding which it clearly isnt.
leftyz
Well-known member
You have 30 days to go back with receipt and coupon to get the lower price, it's in the fine print usually
DFB
Well-known member
Anybody seen those 2 pc ratchets set with the two different drive heads
https://www.harborfreight.com/1-4-q...2-half-inch-dual-drive-ratchet-set-94027.html
I picked up a set but I needed to return it because a screw was missing in one of the drive heads (M3 x.50 x 18mm countersunk T10 star drive and I couldn't find that anywhere ) but I didn't get another because even though I first thought it was kind of handy it seems with the offset handle design its not as good as it could be. If it had the straight handle it be much better IMO
I have one of the big 1/2" composite handle ratchets I have jobs where a big handle like that is what I need, and/or like. to use I also got the offset composite in 1/4" drive just to do battery connections with.
Socket/ratchet sets...I have moved a few different ones on my tool table and I thought the 64 pc was a nice set for the money and the ratchets seemed to be almost the same as the ones in the 20 pc. Pitts Pro 3/8" sets as did some of the sockets, they had the same part#'s
But the one its seems my customers wanted the most this weekend is the 51 pc set! Guess the price is right on that one.
Rachets are pretty poor quality but I tried them out and broke free a few tight bolts on mower including a drain plug to test them I didn't see any damage to the socket and the ratchet didn't break either Case is wicked weak though
Full price these things are only 9.99 and with a 20% coupon just 8 bucks
https://www.harborfreight.com/1-4-q...2-half-inch-dual-drive-ratchet-set-94027.html
I picked up a set but I needed to return it because a screw was missing in one of the drive heads (M3 x.50 x 18mm countersunk T10 star drive and I couldn't find that anywhere
) but I didn't get another because even though I first thought it was kind of handy it seems with the offset handle design its not as good as it could be. If it had the straight handle it be much better IMOI have one of the big 1/2" composite handle ratchets I have jobs where a big handle like that is what I need, and/or like. to use I also got the offset composite in 1/4" drive just to do battery connections with.
Socket/ratchet sets...I have moved a few different ones on my tool table and I thought the 64 pc was a nice set for the money and the ratchets seemed to be almost the same as the ones in the 20 pc. Pitts Pro 3/8" sets as did some of the sockets, they had the same part#'s
But the one its seems my customers wanted the most this weekend is the 51 pc set! Guess the price is right on that one.
Rachets are pretty poor quality but I tried them out and broke free a few tight bolts on mower including a drain plug to test them I didn't see any damage to the socket and the ratchet didn't break either
Case is wicked weak thoughFull price these things are only 9.99 and with a 20% coupon just 8 bucks
Last edited:
cgrandahl64
Member
- Joined
- Sep 9, 2010
- Messages
- 22
Im looking to pickup the earthquake 1/2" impact. On sale right now for 99.99. Is this as good as it gets? Looks the like the 20% coupons cannot be used on earthquake stuff.
trekgod3
Well-known member
Every once in a while they run a "save $20 on any earthquake tool" coupon in the monthly mailer.
I got both of my earthquakes on ebay for $40 or $50 each if I remember correctly