Thanks! There is a store about 50 miles away that has them in stock and I will be near there this weekend so I will try to pick one up. Not as good as the 25% off no exclusion coupon I had when the nearest one was 140 miles away but good enough.
I got it today and the store applied my 25% off inside track coupon instead so the 1000 lb lift cart was $263Thanks! There is a store about 50 miles away that has them in stock and I will be near there this weekend so I will try to pick one up. Not as good as the 25% off no exclusion coupon I had when the nearest one was 140 miles away but good enough.
There's a $5 off any Pittsburgh pro ratchet coupon that never expires, this can be stacked with the non-coupon instant savings.there's a coupon for this one knocking it down to 9.99
![]()
1/4 in. x 3/8 in. Dual-Drive Extendable Ratchet
Amazing deals on this 3/8In, 1/4In Dual Dr Extendable Ratchet at Harbor Freight. Quality tools & low prices.www.harborfreight.com

time to buy, Super Coupon 47077949 10%/15% Off coupon will work on US General Boxes, going to get mine as noted above !!So those won't work on a US General box, right?
time to buy, Super Coupon 47077949 10%/15% Off coupon will work on US General Boxes, going to get mine as noted above !!
Promotions – Harbor Freight Tools
Stretch your dollar even further at Harbor Freight with our latest promotions.www.harborfreight.com


Of course I didn't see this before I bought the trailer box. Lmao
Awesome! And thanks for confirming you can stack the 10% for the CC - another thread was telling me otherwise. Pretty sure I'm gonna be heading in this weekend to pick up a blue 56"
Just in time for the new garage!
I’ve got a question about stacking coupons.
There’s a 10% off coupon this weekend for tool boxes and it goes up to 15% if I sign up for inside track. I also wanted to sign up for a credit card to get another 10% off.
I assume they don’t stack these for a total of 25% off, correct? (e.g. $25 off $100 purchase)
I’m assuming they take the first 15% off, then take the additional 10% off the already discounted value.
Awesome! And thanks for confirming you can stack the 10% for the CC - another thread was telling me otherwise. Pretty sure I'm gonna be heading in this weekend to pick up a blue 56"![]()
Depends on what you're buying but looks like if you're just getting that box top then there's not an overall savings. In my situation, the additional 5% discount covers the cost of ITC plus about $16 savings on the item I'm buying. Not much of a savings, but figure it's better than nothing and now I'll have a year to use it for savings on other items as well. Doubtful I'd want to renew though.I'll be doing the 10% off no ITC here... really have not bought enough to warrant the ITC
I wish they'd put so much effort into a high profile jack for my new project.Does anyone have a coupon good for tomorrow (Monday July 11th) that will work for a Daytona low profile 3 ton jack? Need to buy one tomorrow.
I’m not seeing the coupon. When I pull up the link it’s 30% off everything under 10.00. I would like to buy 2 44’s. Thanks
I just checked their website and this deal is only for the IT members at this time. Sometimes In the past, they offer it over the weekend for 2-3 days to non-members.
Where does it say that this coupon is only good for IT members at this time? The coupon says everyone saves 30% on $10 or less items from Monday 7/11 to Sunday 7/17. It also says IT members save 30% on $20 or less items during that same period.I just checked their website and this deal is only for the IT members at this time. Sometimes In the past, they offer it over the weekend for 2-3 days to non-members.
I tried using this coupon today. When the cashier scanned it, the computer said it was already redeemed. The manager would not honor the coupon. No big deal, I’ll wait until they have other 20% off coupons
I've signed up for their mailings a half dozen times, never have gotten anything from them since the late 90's. I even joined ITC once to get the discount on a toolbox stack I bought when the new deep US General boxes came out, still no coupons. They must have a "pay no mind" flag on my email address.I tried using this coupon today. When the cashier scanned it, the computer said it was already redeemed. The manager would not honor the coupon. No big deal, I’ll wait until they have other 20% off coupons
I had similar with Sears and the old Craftsman club and placing orders online. Not to mention another board that I once used that email with, I have yet to get ANYTHING from, to that email, or my insurance company, where my agent will reply to that email, but I receive nothing they automate, to that email. Using one word has cut down the amount of stuff that email gets.I've signed up for their mailings a half dozen times, never have gotten anything from them since the late 90's. I even joined ITC once to get the discount on a toolbox stack I bought when the new deep US General boxes came out, still no coupons. They must have a "pay no mind" flag on my email address.
How about this one for levels of stupidity...Now that coupons are back they are all but useless since it's in stock only items. My last 25% no exclusions coupon just expired so I figure they'll either a) send me a fourth one that I can't use or b) the item I want will be back in stock and I won't see another coupon until they sell out again.
The other annoying bit is showing items in stock on the website, then checking with the store and finding out they have none in stock (but there are several hundred at the warehouse (wherever that is)
How about this one for levels of stupidity...
The mechanics roller seat is still listed as a recall item on their website but they keep putting out coupons for it. Just took these screenshots a few minutes ago. The right hand definitely does not talk to the left hand at Harbor Freight.
Well maybe before you try to bash others here you should read what I took the time to circle. The 3 item numbers in the coupon are the 3 recalled item numbers. I've went ahead and posted them again and enlarged it for you to verify the numbers!If you took the time to actually read the recall notice (link is in the second picture you posted) you will see the information below.
The details of the recall very clearly state that only 3 identified models and UPCs are recalled, the rest are not recalled. Infact they are offering to replace the recalled unit with a replacement unit. I would think that they are running coupons for models and UPCs that are not the ones that are being recalled.
Reading details is definitely a good idea before posting incorrect assumptions.
The seats are red with a 15”- 20” pneumatic lift range and have a black storage tray located above the wheels. The warning label located on the topside of the storage tray shows the Item # and the white label on the underside of the tray shows the Product Registration No. CA-44417. Only roller seats with the following item and accompanying UPC numbers are included in the recall:
Item Number: UPC:
61896 792363618960
46319 193175340764
63456 792363634564
I am not bashing you. Again, please read the full details. The recall affects 3 models with specific corresponding UPCs. You are only looking at the model numbers. That is only half of the equation. Need to look at model AND UPC.Well maybe before you try to bash others here you should read what I took the time to circle. The 3 item numbers in the coupon are the 3 recalled item numbers. I've went ahead and posted them again and enlarged it for you to verify the numbers!
When the recall happened I received an email from them because I had one of them. They did not have a replacement in stock which was supposed to be the other style they have and the just gave a store credit instead.
Ok, I will try to simplify it for you. They sell the red roller seat under 3 different item numbers, but there is only 1 "model". Naturally they are each going to have their own UPC number. The different item numbers are because they have several different suppliers. If they had the same UPC it would be impossible to have any inventory control.I am not bashing you. Again, please read the full details. The recall affects 3 models with specific corresponding UPCs. You are only looking at the model numbers. That is only half of the equation. Need to look at model AND UPC.
Have a good life.