HD40 application question

[mikereno1]

Just did my first coat, how long do I have to wait to do the next coat?

How long after the third coat can I start burnishing?

 

[S4cruiser]

Just did my first coat, how long do I have to wait to do the next coat?

How long after the third coat can I start burnishing?

I waited an hour or so b/w coats and started burnishing 6 - 8 hours after 3rd application.

YMMV based on how dry your climate is compared to mine on the east cost

 

[LegacyIndustrial]

I waited an hour or so b/w coats and started burnishing 6 - 8 hours after 3rd application.

YMMV based on how dry your climate is compared to mine on the east cost

This!

 

[mikereno1]

Perfect. This stuff goes farther than expected. I've got about 950 sq ft and will be able to get 4 coats easily from the 5 gallons. Probably have a gallon or two left over

 

[landlockedsailor]

How did it turn out?

 

[mikereno1]

Came out well. Easy to apply. I have about 2.5 gallons left of the 5 and did 4 coats on the floor. Definitely adds a little sheen and water and oil just bead onto it.

image hosting 30 mb

 

[LegacyIndustrial]

Great job. Send me your shirt size. Have a great new visor too!!


Sent from my iPhone using Tapatalk

 

[Radix2]

wow that is great!, I think I am close to my decision!

Question - the big buffer to get the main areas - what do you do in the corners and where the big boy wont reach ?

 

[LegacyIndustrial]

wow that is great!, I think I am close to my decision!

Question - the big buffer to get the main areas - what do you do in the corners and where the big boy wont reach ?

Can use a car buffer pad on grinder or car waxer.


Sent from my iPhone using Tapatalk

 

[S4cruiser]

Looks great! Guess not everyone gets free shirts...

 

[LegacyIndustrial]

S4 did you post a pic? Let me know, we will get u a shirt!!


Sent from my iPhone using Tapatalk

 

[Shea]

S4 did you post a pic? Let me know, we will get u a shirt!!


Sent from my iPhone using Tapatalk

Yes he did. You can see them here as well

We've got your back Jon

 

[LegacyIndustrial]

If these gents send me an email with shirt sizes I will get them out the door and my apologies!!


Sent from my iPhone using Tapatalk

 

[mikereno1]

wow that is great!, I think I am close to my decision!

Question - the big buffer to get the main areas - what do you do in the corners and where the big boy wont reach ?

I used a buffer pad, worked well. The big burnisher gets right up to the walls so there was only a tiny area in the corners and luckily I'll have cabinets in most corners anyways