To avoid these ads, REGISTER NOW!

Hello fellas ( ladies too)

madhatch

New member
Joined
Mar 3, 2009
Messages
4
I was posting on a few car forums to find hints and ideas and i ran across this site..

Im building a 20x20 mabe 20x24 garage this month and had ideas but wanted to be openminded.
Ill be doing the epoxy floors as soon as i can, on the left side im putting in 16 foot of cabinets and work bench, with a vice and large steel plate on the far and open end (made from 2x4 and mdf tops and doors.
It will be wired for 220 as my compressor and window a/c and welder will require 220. im wiring it myself and im putting in a ton of outlets, both sides back, roof and outside.
9 foot cealings (im on a budget)
attic on top
air will be plummed into back and both sides with several fittings.
lots of lights 4 8 foot flourecents for now and 2 to 4 more later
a fridge.
TV satelite and stereo ( mounted on wall)
a sink like a slop sink.

duont know of anything else yet. I paint cars as a hobby so i like things bright, and the epoxy floor will be easier to keep up.

if you have any tips hints or suggestions plese let me know...
 
To avoid these ads, REGISTER NOW!

v8garage

Well-known member
Joined
Jun 27, 2007
Messages
901
Location
Texas
Welcome to the forum. Sounds like you have quite a project going on. Keep us posted on your progress.:)
V/8
 
To avoid these ads, REGISTER NOW!
OP
M

madhatch

New member
Joined
Mar 3, 2009
Messages
4
slab was poured last week and the framing begins on monday.. I will be out of town for a week so Ill be lucky to see anything.. The slab and 11 yards if concrete was only 1900 and the slab was buffed smooth and looks great.. Its a 20 by 24 and im still working on the electricity and some plumbing.. I will send up some picks soon...
 
To avoid these ads, REGISTER NOW!
Top Bottom