I am a little more than the typical do it yourselfer, I tend to specialize in automotive customization/fabrication. But I also do very well with wiring, and about anything else I attempt, but I also **** at bodywork and finishing drywall, impatient perfectionist I guess, I hope to get new ideas from this site, and share some of my own as well. For a home garage I am more than well equipped, mig ,tig stick, plasma 4 decent sized toolboxes loaded with hand tools,a carolina bandsaw that cuts up to 13' wide,
and 15 lockers full of power tools and supplies standard drill press, all of this in a 25'x24' garage, my english wheel and plannishing hammer hang out in storage with the pro tools pro 105 tubing bender, for lack of room with local access to a full on automotive machine shop two doors down, but I leave the machine work to Tim, the machinist in said shop.
and 15 lockers full of power tools and supplies standard drill press, all of this in a 25'x24' garage, my english wheel and plannishing hammer hang out in storage with the pro tools pro 105 tubing bender, for lack of room with local access to a full on automotive machine shop two doors down, but I leave the machine work to Tim, the machinist in said shop.
Last edited: