To avoid these ads, REGISTER NOW!

Help Finding Pushbutton Switch for 4 Post Lift

Ennflux

New member
Joined
Nov 20, 2009
Messages
3
I've had my Backyard Buddy trailer width lift for a few years, and it has served me well. The one thing I've never liked about operating it is the small but very strong power switch on the motor. Holding it for 90 seconds is tough due to the small size and spring resistance. I would like to mount a larger pushbutton or other type of switch but am finding cheap plastic models or ones that aren't rated for that much current. I imagine I could wire a relay and use a lower amperage switch but would prefer a direct replacement if possible. Thoughts or suggestions? Thanks
 

Attachments

  • IMG_3531.jpg
    IMG_3531.jpg
    127.2 KB · Views: 33
  • IMG_3535.jpg
    IMG_3535.jpg
    87.2 KB · Views: 33
  • IMG_3536C.jpg
    IMG_3536C.jpg
    86.5 KB · Views: 33
To avoid these ads, REGISTER NOW!

Norcal

Well-known member
Joined
Mar 16, 2008
Messages
13,786
Could use a suitably rated (2 HP, 230V), contactor & a control station, the control voltage could be either 24VAC, or 240V, with line voltage (240V) the simplest.
 

PCustoms

Well-known member
Joined
Jul 23, 2011
Messages
23,684
Location
VT
Duplicate thread?

 
To avoid these ads, REGISTER NOW!
OP
E

Ennflux

New member
Joined
Nov 20, 2009
Messages
3
Duplicate thread?

Yes, apologies. I originally posted it in the general section. Not sure I can delete the original.
 

dogdog

Well-known member
Joined
Nov 15, 2011
Messages
12,711
You can google for that switch model and find one in aliexpress $30 “ADPFJ0”

Google for terms like
“double pole push button limit switch”

And see what you come up with that fits your spec.




Since you have a push button and a double pole with NC and NO

You already mention diy your own with two relay…maybe….
 
To avoid these ads, REGISTER NOW!
Top Bottom