Help identify old Snap-On tool

[Lump]

I have an old Snap-On Valve adjusting tool, which looks a lot like the popular V-21 or V-22 tool, which adjusts valves and/or push rods, as I understand. But it has a very different number, and I assume it is for a very specific application. I have one or two really old Snap-On paper catalogs, but I cannot find them at the moment. Can anyone tell me what a PWA-2835-1 fits? It has a removable socket on the end, number PWA 1075-3, which looks to be about a 5/8 or 11/16 size. The turning handle is just a piece of heavy steel wire or round stock. Thanks for any help.

 

[chad s]

This is a specialized tool made for Pratt and Whitney. Id assume for aircraft use, but not sure what engines. This probably wont be in any of the standard issue catalogs.

 

[Lump]

Wow, Chad. Very impressive. How in the world did you know that, may I ask? It's great to correspond with someone who really knows a subject.

By the way, I think I do have a Snap-On catalog about like the one you posted as a PDF elsewhere on this forum site. I'll try to find it soon, and if/when I do, I'll post it too...unless it is exactly the same year as yours.

I also have another Snap-on catalog, cover missing, which seems to be from the 60's or 70's, based on the tools. There are no dates I can find anywhere, since the covers are missing.

I also have other old tool catalogs, such as a 1938 Bonney tool catalog, a KR Wilson, and several others. Plus, I have my Dad's old hard-bound tool and hardware catalogs from the teens and twenties, such as Lomont. Hopefully someday I can help you in return.

Thanks. -----Lump

 

[T56 Impala]

PWA is stamped into tools specifically made for that engine it will be used on. They accompany that unit to its final destination as part of the package. Well, at least they did during WWII. Many of the old PWA and NAF (Naval Aircraft Factory) tools were sent with the unit to its destination.

Do you have any idea how old this tool is? Any pictures? Maybe some one here could help date it with a good photo.

I seen you are new here. HELLO!!!! Do you collect old tools or did you just happen upon them? There are a few collectors here of various manufacturers. There is also a wealth of information if you simply ask the right question!

 

[Lump]

Hello, and thanks for the welcome.
I have grown up in a family of collectors. So I learned to appreciate older, high quality workmanship and materials at an early age...including tools. I am 55 now, and I have all my dad's tools, my grandfather's tools, plus many from my great grandfather and my great-great grandfather. Some tools are automotive, some really old cabinet-maker tools, some sheet metal worker tools, etc. My dad really liked Mac tools, so I have many of those. I also have several old paper tool catalogs, like Kent-Moore, Knock-Out (KO Lee), and others.
It's hard for me to answer whether or not I am a "collector" of tools. I do collect some on purpose...others I just buy at a garage sale because I recognize the quality, age, and significance of them. I have lots of OEM car-name tools, such as Hupmobile, Nash, Pierce-Arrow, Oakland, Ford, etc. I plan to display them someday among my old car stuff. But I also have nice hand-made jig-type tools that my great-grandfather used for precision woodworking. So, I don't have a collection of one brand of wrenches or sockets. I just like this stuff. But I have too much of some things, and I want other things, so I am trying to identify some tools so that I can decide whether or not to sell them. Does any of this make sense at all...or am I just ranting?

 

[snapmom]

The pwa 1075 is usually a 3/4. These were made mostly in the 40s, they show up in some of the early 40s cats. The one I have is a 1075-8, so the last didget may be a date code, yours being 43 and mine being 48. Not sure about this, cause there is not much history on these PWA tools. Or could be yours is a 8 also, just not stamped well.
Welcome to the GJ, post some pics. Always nice to see some old tools.

 

[fatfillup]

welcome lump, you have probably found a home here. As far as your extras, check out the classified section, many folks here like to trade the older tools. Seems to work out well. As far as whether you are a collector or not, remove the word collector and insert the word addict. Now you'll fit in perfectly.

 

[T56 Impala]

Yes, you make perfect sense! (Scary ain't it!) The classified area is a good place to look for, sell and trade stuff. I have picked up quite a few items and have NEVER had a problem with some one on this forum.

Some of us are looking to collect specific items. Some simply collect tools in general. New and old. Some like to shine them up and look at them. Some like to use them, but most of us are in the middle. I have some nice older stuff that I enjoy using, but, I'm always looking to add that unique or missing item to my collection.

Again welcome and enjoy!

 

[Lump]

Post pics? Great idea. I can take some pretty decent photos, usually. Where do the belong on this forum? Is there a separate area for woodworking tools, auto tools, construction tools, etc? I'll have to brush up on my posting skills, too.
Thanks, everyone.

 

[Lump]

Okay, guys, here are two photos of that Snap On Valve Adjusting tool I asked for your help with. You wanted to see the logo shape, to tell me the vintage. I am very interested to learn the answer. THANKS!!

 

[Lump]

Ouch! Sorry about the oversized photos, and the need to scroll left and right. These are my first photo posts, I'm afraid. I'll figure this out, and do it right next time. Once again, I apologize to everyone. -----------Lump

 

[snapmom]

We all had to learn about posting pics.
Its looks early 40s, difficult to give you an exact age. But just about all thw PWA tools are 40s.

 

[Lump]

Thanks so much everyone! ------Lump

 

[roadrunner69]

As a long time lurker I am always amazed at the vast storehouse of knowledge on this site. I have a tool just like the one shown that I dug out of my Dad's toolbox that I had put in the "What the heck is this used for?" pile, and now I know what it is. Mine is also the -8 variant as well. Wish I had asked more questions while my Dad was still here, I am sure these old tools have quite a tale to tell.

Thanks for the info everyone.

 

[snapmom]

Roadrunner, yours maybe different. If it has a round knob its a much older one.