shawngraham
New member
- Joined
- Sep 19, 2021
- Messages
- 1
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Help ID'ing this machinist tool box (Gerstner?)
- Thread starter shawngraham
- Start date
bmwrd0
Well-known member
A Gerstner would have a different front cover finger pull, one you stick your finger into to hook out the panel with. But, could you open the top? The mirror shape can help. Also, have you checked here https://sites.google.com/site/theguideforwoodmachinistchests/home ?
That site has a lot of info and will help you quite a bit.
That site has a lot of info and will help you quite a bit.
RTM
Well-known member
Nice vintage photo too. Is it the same box, or just a pic you found? If same, where was it?
toolboxted
Well-known member
The chest you have pictured and ask about is not a Gerstner chest. In order for us to help, you’d need to post quite a few more pictures and tell us what the accurate width, height and depth dimensions are, within +/- 1/8”. A side picture of the drawers extended about halfway and a picture of the drawer guides inside the cabinet are also required.
Do you know what factory the picture with all the tool chests was taken in? I’d sure like to know and possibly add it to ‘The’ Guide.
Thanks and you have a good one……..toolboxted
https://sites.google.com/site/theguideforwoodmachinistchests/
Do you know what factory the picture with all the tool chests was taken in? I’d sure like to know and possibly add it to ‘The’ Guide.
Thanks and you have a good one……..toolboxted
https://sites.google.com/site/theguideforwoodmachinistchests/
Maui
Well-known member
If it is a Gerstner the name should be stamped on the main lock that takes the key.