Help matching a KRL box handle

[mailpete]

I purchased a KR557 Roller a while back that had no handle. I found a pair of KRL handles for sale online and purchased them, adapting one slightly (shortening the center bar) to fit the 20" depth of the box. I think these handles were designed for the 24" KRL Master series boxes, however ther are no part numbers on the handles or the literature that came with them. I'm now thinking of selling the extra handle and would like to identify which size box this would match up with (without modification), so that I could advertise it as such. So...wondering if anyone with a 24" KRL box could measure the hole spacing for the handle and see if it matches this one. overall length is 17 3/8", with the actual screw hole spacing being 13 3/8" center to center. I think it probably fits the KRL722, KRL761, or even the KRL1022 etc? Thanks for any help. Pics are of the actual handle as well as the one that I mounted on the KR557.

 

[Givl Reggin]

As soon as you sell it, you'll find a use for it... isn't that the way it always works?

Actually, if I had two handles the same I would have mounted them vertically on the side, instead of the traditional horizontal way... seems like it would give you better control in moving around a heavily loaded box.

 

[mailpete]

good point!...however...my wife might tell you that I have stuff that has sat around here for YEARS...with no apparent use! hmmmm...now that I said....Is she talking about ME???

 

[el tanque prohibido]

I think it probably fits the KRL722, KRL761, or even the KRL1022 etc?

Not the KRL1022 because it's a deeper box and has a wider side handle.

 

[mailpete]

nobody with a KRL722 and a tape measure?

 

[el tanque prohibido]

I'm pretty sure they only make two different widths of that style handle because the KRL series boxes only come in two different depths.

 

[jaysonb]

I'll measure the handle for my 722 when I get home. It's just sitting in one of the drawers.

 

[mailpete]

that would be great! can I ask why its in the drawer and not on the box? (assuming maybe built in)