Help me find...

[AntiqueCarNut]

a long nose wire cutter. What I'm looking for is essentially a needle nose plier with the cutting tip at the very end. I work on motorcycles - primary electronics, custom wiring harnesses and such. Often, I need to cut a ty-rap that is difficult to reach.

Ever seen anything like this? Figured if anyone would know, y'all would.

TIA.

 

[merr6267]

Razor knife.

 

[BigAl62]

I use a long pair of diagonal cutters from Snap On: http://buy1.snapon.com/catalog/item.asp?store=snapon-store&item_ID=51311&group_ID=763

 

[MastoidPress]

Shoot...Just get yourself a pair of American made Klenk Aviation Snips. The blades are not as narrow as a needle nose, but not as fat as a diagonal cutter.

http://www.klenktools.com/

 

[Dale B]

I have a pair of Klein Needle nose end cutters P/N 204-6C. The # doesn't show up on google so maybe its changed. I use it for nipping off wires on pc boards , etc. Imagine a 1/4"wide nipper at the end of needle nose pliers.

 

[usdemt]

I use these to cut just about anything that would wear down the edge of a normal scissors. They take a little more pressure than a dykes to cut zip ties with when you are using the tip, but they work well and dont want to "twist" and bend when cutting the ties.

http://www.amazon.com/Wiss-WEZSNIP-Easy-Utility-Shear/dp/B000GJBLG2

 

[TWX]

http://www.stanleysupplyservices.com/product-detail.aspx?pn=320-175

This is what I have. Works pretty well.

 

[srmofo]

medical stuff
http://www.mtsmedicalsupply.com/pages/PCT-2.cfm
http://orthixx.com/gb/distal-end-cutters.html

 

[JetLinkin]

medical stuff
http://www.mtsmedicalsupply.com/pages/PCT-2.cfm
http://orthixx.com/gb/distal-end-cutters.html

Doesn't everybody have Long Reach Toe Nail Cutters in their box?

 

[vhol5]

If it's mainly for wire ties, why not a wire tie tool?
Tightens and snips at the tip...

http://cableorganizer.com/cable-tie-guns/

 

[skruft]

Kobalt made a long nose wire cutter. Also there are some made for reaching into very, very small places, where the cutter is in the end of a shaft. I have found them at flea markets.

 

[DrkMtnDew]

here is a channellock pair that sears is selling...

http://www.sears.com/shc/s/p_10153_12605_SPM5784246501P

 

[Sterff]

here is a channellock pair that sears is selling...

http://www.sears.com/shc/s/p_10153_12605_SPM5784246501P

I have that pair. I use mine for springs though. Also it's a lot cheaper here...

http://www.tooltopia.com/channellock-748.aspx